Used Cross Breaking for sale (7,499)

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Hnjdouzlg Dopfx Ag Nsu

Condition: new, Year of construction: 2024, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Hjdpstvmv Refx Ag Nenu Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Hnjdpfow Htm Rsx Ag Nju Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Dimter OPTICUT 204R OPTICOM ASSIST control – programming in CZ/DE/EN Hnsdoxgdwdjpfx Ag Nou Programming – by classes, quality, marking cut, length cut – full optimization Very simple programming Full documentation – operating manual, parts catalogue, pneumatic and electric schematics Maximum cutting length 4000 mm (extendable up to 6700 mm) Maximum cutting height 100 mm Maximum cutting width 260 mm Saw blade diameter 500 mm Feed speed 180 m/min Number of sorters – 4 (expandable up to 10) Saw lift – pneumatic Cutting accuracy +/- 0.5 mm The machine is powered and available for testing The machine is like new, 100% complete and fully operational! We can arrange transport within the EU.

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm Hedpeu Dhupjfx Ag Njnu - complete with saw dust filter

Condition: ready for operation (used), Cross Bar Milling Machine Manufacturer: Stegherr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs Hedpfx Agow Imhcj Njnu A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Extraction connection diameter 180 mm Incl. 3 milling tools

Condition: used, Transnorm roller conveyor ejector GF1800-600-550 RA2429 Make: Transnorm Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 600 mm length: 3715mm Overall height frame: 130 mm Frame / 300 mm discharge conveyor Rolls diameter: 50 mm Pneumatic control of the rollers 4 rows of discharge rollers including tensioning station for belts Without drive station, please contact us for this Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Hedpfow R Hkcjx Ag Nsnu For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Hjdohw Ng Ispfx Ag Nsnu Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), Spindle speed: 3,000 rpm Max. workpiece length: 500 mm Cut-off wheel: Ø 180 x 1 mm Cup wheel: Ø 100 x 20 mm Hodpfow Hbqwox Ag Nenu Dimensions: approx. 430 x 360 x 500 mm Weight: 90 kg

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Hnsdpfx Agsw T Rpzs Neu Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Extended table on the right side

Condition: used, Chain cross conveyor Width: 3.70m Hjdpfxjwy Uvge Ag Nsnu Length: 14 m

Condition: used, Year of construction: 2018, Glass dimensions: Max. Glass width: 1200 mm. Max. Length: 1200 mm. Max. Glass thickness: 12 mm. Min. glass width: 150 mm. Min. length: 300 mm. Min. glass thickness: 3 mm. Silicon carbide or diamond belt size: 3350 mm long and 100 mm wide. Electrical connection values: 400V, 50/60Hz, 3 phase Hedpfx Agoww Ih Ds Nsnu 13 kW/23.5 A Max. Height of the system: 1900 mm. Max. Max. depth of the system: approx. 2000 mm. Max. Max. width of the system: 3250 mm. Condition: very good, second-hand

Condition: new, Year of construction: 2025, functionality: fully functional, Cross table with precisely ground cast iron work surface. Equipped with T-slots which allow for workpiece fixture. Intended for processing, milling and drilling while preserving high precision due to a very accurate 0.02 mm vernier. Hodpfx Agovu Tnxs Nsnu Technical data Vice size 125 mm Base size 200×270 mm Table size 475×154 mm Transverse feed 150 mm Longitudinal feed 320 mm Vernier 0.02 mm Groove width 16 mm Screw spacing 175 mm Total dimensions 772×440×180 mm Weight 28 kg

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Hsdpfx Aoxdtlfeg Nonu Speed 3500 rpm Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Condition: used, Year of construction: 2013, SECOND-HAND CROSS-CUTTING VENEER PACK GUILLOTINE CASATI MOD. TO/CC1450 - Cutting lenght mm. 1450 - Pressor stroke mm. 100 - Max. rear feed width mm. 600 - Min. rear feed width mm. 25 - Hydraulic unit motor power kw 3 - Rear feed motor power kw 0,37 - Year 2013 Hnjdpfx Agjv Tczle Nsu

Condition: new, Year of construction: 2024, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Hsdpfoiy Ry Aex Ag Njnu Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: used, Double rip saw IDL000811 - max width: 2500 mm Hnjdju At Tbspfx Ag Nsu - electric cabinet - manufacturer: Tegle/norway

Condition: used, mileage: 85,239 km, power: 63 kW (85.66 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/2022, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subject to errors and prior sale! Internal number: 0762. 3H30863 ----EQUIPMENT * Paint finish: Uni (special colors) * Van: 2nd row seats removed, partition grille * ABS with electronic brake force distribution (EBD) * Airbag: head airbags * Airbag: driver and front passenger airbags - front passenger airbag can be deactivated * All-wheel drive with automatic engagement - with two differentials * Exterior mirrors driver/passenger side - manually adjustable from the inside * Exterior mirror caps in black * Brake light, third * Roof rails, deep * Rev counter * Electronic Stability Control (ESC) with Hill Holder * Electric windows * F.P.S. (Fire Prevention System) - with interruption of the fuel supply in the event of a collision * Radio remote control for central locking * Transmission: 6-speed manual * Rear window wiper/washer system Hnodpfsu Nrt Hox Ag Nju * Rear window heating * Automatic air conditioning * Boot lighting * Front head restraints, active, height-adjustable * LED daytime running lights * Steering wheel: height-adjustable * Front fog lights * Upholstery - imitation leather * Radio: Uconnect mobile radio with 4 loudspeakers, Bluetooth hands-free system and audio streaming, USB, DAB+ digital radio reception, smartphone holder in the dashboard and multifunction buttons on the steering wheel * Wheels: tire pressure monitoring * Side impact protection * Power steering, electric (Dual Drive) with City function * Seat belts: 3-point seat belts on all seats - front with belt tensioners and belt force limiters * Seats: seats with soft touch * Start & stop system * 12-volt socket at the front * Immobilizer * Central locking with radio remote control ... and much more. ----The vehicle is unprepared! Nationwide delivery possible for an extra charge. Subject to errors and prior sale. We are happy to take your vehicle in payment. Financing / leasing also possible without down payment! Do you have any questions? We will be happy to advise you!

Condition: new, Year of construction: 2025, functionality: fully functional, 600x240 mm Cross Table Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Hnodpfovu Trwox Ag Nsu Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: good (used), Year of construction: 2013, functionality: fully functional, feed length X-axis: 6,200 mm, saw blade diameter: 550 mm, cutting width (max.): 600 mm, power: 15 kW (20.39 HP), overall weight: 1,000 kg, Shortening saw UKS 700 OPTIM for transverse shortening of wood and wooden materials Hnodpfx Agjtpukho Nju We offer 2 machines = variant (left or right side operate) >>Price is for 1 set(pcs) Present as dismounted from automatic line already The optimization shortening saw can be used in various branches of the wood industry: • sawmill production of semi-finished products • shortening prisms, packets, plates, prisms • production of slats for the production of glued prisms • production of massive furniture parts • automatic shortening of boards and planks in the production of construction carpentry products

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Easy-to-use preparation system for producing high-quality sample cross-sections for SEM, EPMA, and Auger applications. Features: • Artifact-free cross-section polishing with argon ions, ideal for subsequent SEM imaging or EBSD analysis Hnedpfx Asw Sm Uwjg Nju • Preparation of soft materials, composites up to hard metals/diamond • (Re-)polishing of embedded sections • Carbon or metal coating / sputtering possible • Monitoring of preparation progress via integrated camera • Dimensions: 587 mm W x 802 mm D x 429 mm H

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm Hnjdpfxsnzpx Ro Ag Nsu -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Hnsdsvu Tp Aspfx Ag Nou Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 2.5 mm/0.02 mm vernier

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled Hnedpfx Ajtrhm Asg Nsu -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Hnjdpjvu Uwujfx Ag Nsu Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier