Used Curing Oven for sale (1,163)

Condition: used, temperature: 250 °C, Electrolux 10-level Combination Oven Electrolux AIR-O-SYSTEM combination oven with 10 levels, model B, including a water softener. Fpjdpfxo Ah Hn Es Aanop Capacity: 10 levels Combination steam oven with boiler and 7 cooking modes Regeneration cycle: optimized cooking settings for quickly reheating products on trays and baking sheets (max. 250°C). By-pass technology: controls the humidity level within the oven chamber during combination and regeneration cycles. Fan speeds: full speed, half speed for delicate pulsed cooking, such as baking cakes, and pulsed ventilation for oven and low-temperature cooking. Includes a single-sensor core temperature probe. Reduced power consumption. Air-o-flow: fresh air from the outside is directed to the bifunctional fan, preheated, and then blown into the cooking chamber to ensure a uniform cooking process. Integrated and automatic air-o-clean self-cleaning system (4 automatic cycles and 1 semi-automatic cycle).

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Fodpfxszylxce Aanepp

Condition: good (used), Year of construction: 2013, Drying and stoving oven TRO Model I, 60x90 Fpedpfx Aaor Izh Uensp for fixing and drying textile inks, flock adhesives and baking sheet metal and aluminum signs, suitable for inserting drying racks with 50 grids, loading area 60 x 90 cm, good heat insulation, easy loading, temperature control via actual and setpoint thermostat, with overheating protection, usable space dimensions: approx. 108 cm wide x 78 cm deep x 166 cm high, external dimensions approx. 192 cm wide x 128 cm deep x 230 cm high, approved for paints and solvents up to hazard class A II, fixing and drying temperature: up to max. 180°C, not suitable for drying food, connection: 400V, 50Hz, 21kW, weight: approx. 685 kg. Used, year of construction 2013, good condition.

Condition: used, Year of construction: 2019, Operational condition UV curing oven! Fodpfx Ajzl Sykoanspp

Condition: used, -Dimensions: 800x1150x1120 mm -Model: MISTRAL 10T -Serial number: 04970233 -10 levels -Plates: 400x800 Fsdpfx Aaszfp U Senepp -Plate spacing: 90 mm -Power: 18 kW -Voltage: 230V -Weight: 136 kg -Refurbished equipment: The equipment is prepared upon order, and the lead time for processing and return is agreed upon at that time (please inquire about the price after refurbishment).

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system Fpedpfx Aaoy Tvvzjnjp • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 250 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Industrial Powder Coating Ovens – Flexible Designs, Sizes & High-End Upgrade Options Are you looking for a powerful, reliable, and efficient curing oven for your powder coating process? We provide customized solutions for every application – from compact chamber ovens to fully integrated conveyor systems! Versatile designs for every process: No matter how your production is organized, we offer the right oven concept for your material flow: - Chamber ovens: Classic design with single-sided doors for batch loading. - Tunnel ovens: Practical pass-through solution with doors on both sides for an optimized loading and unloading process. - Special ovens for conveyor systems: Specifically designed ovens for continuous production processes, perfectly adapted to automatic conveying technology with a conveyor chain. - Flexible door systems: Depending on space and requirements, optionally equipped with swing doors or space-saving sliding doors. Your oven, tailored to your needs – Standardized performance or 100% custom design: Our standard model range: - Flexible dimensions: Standard internal lengths up to 6.5 m with selectable internal widths of 1.7 m or 1.9 m (standard height: 2.0 m) - Heating according to choice: Fully flexible, available as an electric version or with an efficient gas burner - Versatile loading: Standard preparation for use with rack cars or for integration into a conveying system Individual customized solutions: - Free dimensions & geometries: We manufacture any desired special size, deviating construction heights, or complex spatial geometries exactly according to your specifications - Special heating concepts: Specific burner outputs or adapted heating zones for complex component requirements - Special conveying technology: Tailored integration for integrated overhead conveyor chains, automatic indexing conveyors, or individual crane and lifting systems Smart additional options & upgrades: - Automatic door control: Convenient, automatic opening and closing for sliding doors - Inverter control of the circulating air: When the doors are open, the fan speed is automatically reduced. This prevents the warm air from blowing out, noticeably minimizes energy loss, and saves money. - Temperature curve recording: Complete recording and logging of the curing process for quality and process documentation - Extended sensors & temperature monitoring: All of our ovens have a highly precise, uniform temperature distribution of ±5°C. For the highest quality standards, additional Fsdpfx Aefhv Tleanjpp sensors can be integrated upon request to document the homogeneity in the entire oven chamber in detail. Technical highlights of our ovens: Maximum efficiency: High-quality 150 mm rock wool insulation for minimal heat loss Powerful circulating air: High-performance fans for perfect heat distribution and uniform curing results Higher temperature ranges: Maximum operating temperature up to 250 °C Durable & robust: Stainless steel thermo-block with integrated overheating protection and heat-resistant bearings Including control: Complete electrical control included in the scope of supply Contact us! We offer free consultation. We plan and manufacture your powder coating oven exactly as you need it for your production.

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Ask for a quotation! Fjdpfx Aasy Nzb Uenepp

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Fpedsfx Nfmjpfx Aanep 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 1999, condition: used, machine/vehicle number: 99116961, Technical specifications: - Rated / continuous temperature up to 1150 °C - Infinitely variable temperature control Fjdpex E Ubgjfx Aanjpp - Temperature display - Drive: 400 V / 5 kW - Internal dimensions approx.: W 160 x H 160 x D 360 mm - Required space approx.: W 850 x H 700 x D 600 mm - Weight approx.: 140 kg

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Fodpfx Aajfz U Nbonopp 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 Fsdsfz Nd Iepfx Aanspp 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Fpedpfsfy T Spex Aansp 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Fsdpfxofzb Rcs Aanspp Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Fjdpfx Ajwctn Hjanopp Ask for additional information!

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Fodpofzccnsfx Aanopp Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Fpsdpefz I Rxofx Aanop Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2023, operating hours: 400 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9457SH, ElectroHeat Conveyor Oven - Year 2023 High-quality ElectroHeat conveyor oven in excellent condition, manufactured in 2023. The oven is designed for continuous heat treatment processes and features four independently controlled heating zones. Technical Specifications Manufacturer: ElectroHeat Sweden AB Model / Project No.: 9457SH Type: Conveyor Oven Year: 2023 Maximum temperature: 180°C Power supply: 3 x 400 V + N / 50 Hz Rated current: 50.56 A Internal dimensions: Width: 700 mm Height: 700 mm Length: 5,950 mm Maximum load: 300 kg evenly distributed on the conveyor Approximate weight: 2,800 kg Recommended compressed air supply: 5 bar CE marked Features 4 independently controlled temperature zones Automatic conveyor system HMI touchscreen control panel Integrated safety light barriers Pneumatic vertical doors Fjdpfxo Aayxzo Aanjpp Continuous production operation Suitable for industrial drying, curing, heating and thermal processing applications The oven is currently installed and can be inspected under power by appointment. Condition Very good used condition. Delivery Available immediately, subject to prior sale. Sold as seen and tested.

Condition: like new (used), Year of construction: 2012, operating hours: 75 h, This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Fsdpfxetvz Rfs Aanspp Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Fsdpfx Aasxhfnysnspp Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. Fpsdsx Tg Axopfx Aanop These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Year of construction: 2025, condition: like new (used), functionality: fully functional, 12 months warranty, available from 12/2026, like new Model TS, pass-through cabinet with fully insulated stainless steel doors, locked to minimize contamination, e.g., for transferring materials between clean and dirty areas - with frame - Maximum temperature 250 °C - Oven chamber volume 161 liters - External dimensions (without frame) 745 x 1233 x 584 mm (W x H x D) - Oven chamber 560 x 720 x 400 mm (W x H x D) - Adaptive, multifunctional digital PID microprocessor controller with high-resolution TFT color graphics display - Timer: Digital countdown timer with target time indication, adjustable from 1 minute to 99 days - SetpointWAIT function: Process time only starts when the target temperature is reached - Calibration: Three freely selectable temperature values - Adjustable parameters: Temperature (Celsius or Fahrenheit), speed of circulation fan, exhaust flap position, program runtime - Additional adjustable parameters: Time zones, daylight saving time - Air turbine: Electronically controlled, adjustable in 10% steps, low noise - Fresh air: Addition of preheated fresh air through electronically adjustable exhaust flap - Exhaust: Exhaust port with throttle valve, electronically controlled - Maximum 8 inserts possible (only 2 grid inserts included here) - Maximum load per shelf approximately 20 kg - Maximum load of the unit: 210 kg - Power 3200 W Fpedpfjz Tf Ddsx Aanep - Voltage 230V, 50/60 Hz - Weight of the oven 125 kg + frame - Documentation, CE declaration The oven must not be used for substances containing solvents. Not DIN 1539 compliant! Oven, Industrial oven, Heating cabinet, Heat oven, Laboratory oven, Drying oven, Temperature oven, Test cabinet, Universal cabinet, Precise drying, heating, tempering, aging, baking, testing, and curing in research, science, industry, and quality assurance.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, warranty 12 months, immediately available - Temperature 200°C, can be increased to 250°C! - Charging trolley, 5 units available, conversion on request - Homogeneous temperature distribution of +/- 10°C - Internal dimensions W x D x H: 3750 x 1400 x 2300 mm - External dimensions W x D x H: 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control - Temperature limiter - Signal column - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door lock - Rated power: 180 kW - Connection: 214 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity Fpsdpfsy Tkfwjx Aanjp We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, oven, kilns, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating air oven, chamber furnace, heating oven, chamber recirculating air oven, annealing oven, tempering oven, recirculating air chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, warranty 12 months, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units offered, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C Fsdpoy Avqwjfx Aanopp -Internal dimensions WxDxH 3750 x 1400 x 2300 mm -External dimensions WxDxH 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 214 KW !!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport and installation as well as training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber furnace, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber furnace, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, power: 9.8 kW (13.32 HP), input current: 16 A, inner dimension length: 80 mm, inner dimension width: 120 mm, inner dimension height: 16 mm, total length: 140 mm, total width: 153 mm, total height: 200 mm, overall weight: 600 kg, number of chambers: 4, actuation type: electric, fuel type: electric, Wiesheu EBO 128-S multi-deck oven Separate control for lower and upper heating elements 4 decks, deck height: 16.5 cm Oven is mobile with locking mechanism Modular construction Fedpjzylhwsfx Aanspp Connection: 400V, 16A-CEE plug Dimensions: 1530 x 1400 x 2167 mm (W x D x H) Used oven