Used Curtain Coating for sale (4,192)

Condition: used, empty load weight: 400 kg, inner diameter: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Coating pan Gksdpfx Aae Akb Apjnod Batch size: approx. 130 kg Pan diameter: 1,200 mm Pan depth: 650 mm Inlet/outlet diameter: 700 mm MACHINE DETAILS Motor power: 1.5 kW Voltage: 220/380 V Dimensions and weight Footprint: 1.7 x 1.3 m Overall height: 1.9 m Weight: 400 kg EQUIPMENT Mounted on a frame

Year of construction: 1994, condition: used, empty load weight: 330 kg, heating capacity: 3 kW (4.08 HP), Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gksdpe Ai Nbaofx Aansd Coating pan Batch size: 1.3 / 3.75 l Pan diameter: 290 / 360 mm Pan depth: 100 / 120 mm Material: Stainless steel 1.4306 (304L) Surface: highly polished inside MACHINE DETAILS Motor power: 0.7 kW Heating and fan Heating power: 3,000 W Fan: EG&G Rotron, Type DR404AL72M Fan motor power: 0.75 kW Voltage: 380 V Dimensions and weight Footprint: 1.0 x 0.9 m Overall height: 1.5 m Weight: 330 kg EQUIPMENT Infinitely adjustable drive Electric heating Fan Air filter Switch Mobile Mounted on a frame Note: Without spray arm and without hose pump.

Year of construction: 1994, condition: used, empty load weight: 5,000 kg, inner diameter: 2,070 mm, rotational speed (max.): 15 rpm, machine/vehicle number: HUE-100794, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Type: Coating pan / film coating system Quantity: 1 Material: Stainless steel 1.4301 (304) Gjdpfx Aas Ai A D Hjnokd Pan Batch size: 200–600 kg Pan diameter: 2,070 mm Pan depth: 1,560 mm Inlet/outlet: ø 700 mm Pan speed: approx. 1.5–15 1/min MACHINE DETAILS Drive Motor power, pan drive: approx. 9.2 kW Voltage, pan drive: 400 V Process air Heating capacity, electric: 210 kW Number of blowers: 2 Motor power, blower 1: 7.5 kW Voltage, blower 1: 380 V Motor power, blower 2: 15 kW Voltage, blower 2: 400/690 V Number of air filters: 2 Dimensions and weight Footprint: 3.7 x 2.3 m Overall height: 3.2 m Weight: 5,000 kg EQUIPMENT Mounted on a frame Frequency inverter Electric heating Air filter DCE Unimaster, type UMA-454 V Spray arm Metering pump, manufacturer Walther Trowal Control cabinet (condition as inspected)

Condition: used, empty load weight: 560 kg, inner diameter: 700 mm, inner dimension length: 350 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Coating drum Drum diameter: 700 mm Drum depth: 350 mm Inlet/outlet diameter: 400 mm Batch size: 15–50 kg Drum speed: 13–25 rpm MACHINE DETAILS Drum drive Design: continuously variable Motor power: 0.7 kW Metering pump Motor power: 0.18 kW Voltage: 380 V Dimensions and weight Footprint: 1.8 x 1.2 m Overall height: 1.7 m Weight: 560 kg EQUIPMENT Gksdps Akbzvsfx Aanod Adjustable drum angle Continuously variable drive Electric heating Fan with motor Spray arm Metering pump Control cabinet Mounted on a frame

Year of construction: 1992, condition: used, empty load weight: 1,650 kg, inner diameter: 1,300 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Coating drum Batch size: max. 150 kg Drum diameter: 1,300 mm Cylindrical width: 350 mm Perforated zones: 4 x 290 x 230 mm Discharge valve: approx. 300 x 70 mm Gjdpfx Aj Ai Ndceanskd Material: Stainless steel 1.4401 (316) MACHINE DETAILS Motor power: approx. 3.0 kW Voltage: 415 V Dimensions and weight Space requirement: 2.2 x 1.8 m Overall height: 2.3 m Weight: 1,650 kg Dimensions of control cabinet: 2.8 x 0.5 x 2.1 m EQUIPMENT Suitable for film and sugar coating Partially perforated drum Pneumatically operated discharge valve Spray arm Control cabinet Ex-protected motor ATEX version

Year of construction: 1994, condition: used, rotational speed (max.): 20 rpm, machine/vehicle number: 101.196, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of drums: 7 Drum volume: 5.6 / 11 / 21 / 51 l Vessel diameter: 490 / 500 / 600 / 750 mm Inlet diameter: 750 mm Vessel speed: approx. 2–20 rpm Drive motor: 1.5 kW Connection voltage: 400 V Material: Stainless steel 1.4435 (316L) Drum diameter 750 mm: 2 units Drum diameter 600 mm: 3 units Drum diameter 250 mm: 1 unit Drum diameter 115 mm: 1 unit Heating and ventilation system Steam requirement: 84 kg/h Gjdpfx As Ai Av Hjanjkd Number of fans: 2 Air flow rate: 1,200 m³/h Fan motor 1: 5.3 kW Connection voltage fan motor 1: 400/690 V Fan motor 2: 1.5 kW Connection voltage fan motor 2: 400 V Space requirement: 2.5 × 1.7 m Overall height: 2.2 m EQUIPMENT Frequency inverter Steam heating (steam boiler not included) Supply and exhaust air fans 2 spray arms (dosing pump missing) Control cabinet Air treatment unit ATEX design Explosion-proof drive motor

Condition: used, functionality: fully functional, working height: 950 mm, working width: 400 mm, type of input current: three-phase, total length: 3,000 mm, overall weight: 300 kg, total height: 1,500 mm, total width: 650 mm, The Leif & Lorentz Angled Curtain Coater is an industrial coating machine designed for the fast and consistent application of coatings to wood and other suitable workpieces. With a coating width of 400 mm and an inclined conveying system, the machine is particularly suitable for coating long wooden workpieces and profiles. Depending on the shape of the product, the angled design allows two sides to be coated in a single pass. The coating quantity and feed rate can be adjusted to achieve the desired result. This specific Leif & Lorentz Angled Curtain Coater is available as a used machine. The machine is in fully working condition and has been completely inspected in our workshop. Gsdo Ahqpyjpfx Aanjkd

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Brush air Apache 15 impregnation line, year 2016 (USED, fully operational, taken from the customer from whom it was acquired). Gkjdpfovy Enhex Aanod Complete with automatic loading and unloading conveyors.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun Gedpfozqur Hex Aanokd

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor Gkjdpfx Aaez I Dtfjnsd

Year of construction: 2018, condition: good (used), Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil, Gkedpoz I Dt Sjfx Aaned

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information Gksdpoz Rnu Tofx Aaned • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Gkedpfswzl Hxox Aanod ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Godpfx Ajwfhu Heanekd Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Gksdpfxexa H Ews Aanod (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: good (used), 1 x Coating Drum Gsdpfx Ajzz It Seanskd 4m long. Infeed diameter 750mm. Outfeed 1m

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Gjdpfxewzmcbj Aanokd Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, overall weight: 36,000 kg, next inspection (TÜV): 09/2026, loading space length: 13,830 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Curtain Master MEGA White aluminum Dimensions and Weights Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between posts 2480 mm Inner width between longitudinal beams (without lifting roof) 2480 mm Lateral loading height with lifting roof and inner height 2850, 2785 mm Axle distance 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance from kingpin to 1st axle 6390 mm Number of Euro pallets 34 pcs Technically permissible gross weight (administrative) 36000 kg Technically permissible gross weight 42000 kg Technically permissible axle load (administrative) 8000 kg Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Manufacturer designation NS3K nd Accuracy +/- 4% nd Unladen weight 6560 kg TECHNICAL DATA Chassis Lamp bracket made of steel 371 mm Pallet stop with lashing eyes Wielton side impact protection, white solid filling Rear underrun protection, fixed Steel rear underrun protection Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Perimeter frame with continuous lashing points for securing the load, SAFETY LOCK system, 50 to 67 per side depending on the model Steel buffer at the rear Axes and Suspension Number of axles 3 Rigid axles Saddle height 950 BPW disc axles 3x 9000 kg, 19.5 ECO PLUS, 3 clamps, BPW, ET=120 1st lift axle Support legs 2-speed geared support legs, full load (BPW Gen2 FL/SAF Hercules) Fenders PVC fenders, shell, 2 front, 6 rear Rims 6x steel rim 19.5-14 ET-120 Tires 6x ALL-ROAD Premium tires 445/45/R19.5 (Goodyear) Other chassis equipment Two wedges with mounting Customs rope/tarpaulin rope on the front wall (no customs seal) 1 extendable rear ladder 2 identification plates on the rear panel 565x200 ECE-R70 Body Inner height 2950 Insert strips - 4 rows 1st row, aluminum overlay strips, H=100 mm, 8 pcs Sliding roof Edscha HYBRYD (0, +50, +100, +150) and 450 for loading, roof can be moved forward and backward independently of the side tarpaulins Godpfx Aozx Iqrsanekd Side tarpaulins with 24 tarpaulin tensioners Aluminum front wall Front wall impact protection (metal plate) H=1500 mm 2nd row, aluminum overlay strips, H=100 mm, 8 pcs 3rd row, aluminum overlay strips, H=100 mm, 8 pcs 4th row, aluminum overlay strips, H=100 mm, 8 pcs Tarpaulin quick tensioner at the front Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Tarpaulin tensioner with additional locking mechanism Sliding tarpaulin that can be opened on both sides EDSCHA HYBRID Rear wall as an aluminum double-wing door Braking system/pneumatics Braking system Wabco with Basic Modulator with RSS/RSP Steel air reservoir Chassis painting Chassis painting RAL 7021 (black gray) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 RAL 9006 (silver) Electrical system 2x7-pole + 1x15-pole with EBS connection, without connection cables to the central unit Lighting LED Aspöck-EUROPOINT III with flashing side marker lights Additional systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Version DC 9.5 design Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Designation in German Certificates/Homologation Certificate f

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, RENT-TO-OWN * LEASING * FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8 8-speed automatic transmission, 3.0 diesel, 176 hp Options / Equipment: 05925 ? Additional, adjustable, and switchable speed limiter 07629 ? Without acoustic warning signal 06064 ? Reinforced double rear leaf springs for S? models 73024 ? Exterior mirrors on extension arms for body width 2.35 m 00344 ? Rear view camera 07820 ? Ball head tow hitch D?50 06552 ? Trailer socket 12 V, 13-pin 00821 ? Digital tachograph 4.1 00265 ? Comfort passenger seat with adjustable lumbar support ----STYLE PACKAGE 3.5 S: 79336 ? Daily grille with chrome strips 01553 ? Emblems in Gun Metal color 02308 ? Daily aluminum rims 72625 ? Full LED lighting (daytime running lights, low beam and high beam) ----COMFORT PLUS PACKAGE: 00259 ? Sprung-mounted comfort driver's seat 01611 ? USB ports A + C on driver and passenger side 75082 ? Fixed 2-seat passenger bench with folding table, 3-point seat belts 07196 ? Air conditioning compressor 170 cm³ 01605 ? IVECO NAVI MY infotainment system with 10-inch display 14522 ? Adaptive cruise control (ACC) with radar sensor 06650 ? Ventilation and heating system with automatic air conditioning 79297 ? Fully upholstered headrests with memory foam, Daily logo ----BODY: Approximate interior dimensions: Length x Width x Height (mm): 4,200 x 2,200 x 2,300 mm ? Height flush with the cab Tarp color: Silver Base vehicle: Iveco Daily 35S18, single cab, wheelbase 4,100 mm ----Description of the MaxTrans aluminum body standard: * Auxiliary frame profile made of aluminum 108 mm * Crossbeam profile made of aluminum 70 mm * All-around frame profile made of anodized aluminum 70 mm * Floor made of non-slip melamine resin-coated board, 15 mm * Front/rear corner posts fixed, aluminum 133 mm, black anodized * Front wall 400 mm anodized + additional plywood panel 1,250 x 15 mm * One-piece side wall 400 mm anodized, closed with cassette-type side wall locks * Closure of the body with one-piece rear wall 400 mm including step on the rear wall * Steel forged, rust-free (non-staining) hinges for side and rear walls * Partition of the side walls and removable steel center post from body length 3,800 mm * One pair of mobile lashing points per meter of body length, mounted in the all-around frame profile * Aluminum tarp frame * Four rows of aluminum roof rails * Three rows of pockets for tarp slats with wooden slats * Lighting according to road traffic regulations * Complete set of fenders with mud flaps * Translucent roof (skylight) * LED lighting in the cargo area * Tarp with buckle closure ----Additional equipment: * Frame extension required for this body length * Spojtrak XL sleeper cab in white with standard wind deflectors - two beds * Curtains in the cab * Independent WEBASTO stand-alone heater with potentiometer control and warm air distribution in the sleeping area * One-sided side wall tarp (curtainsider) with steel tensioner - left side * Toolbox * Underrun protection / pedal protection over 2,000 mm length * Adaptation of the factory-installed tow hitch to the body length Gedpfx Aaszy T N Nenjkd Our special service for you: * Maintained according to service schedule at authorized dealers and certified workshops * Winter tires available at an extra cost * Warranty insurance up to max. 36 months possible for an extra cost * We will take your

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: Gkedjz N Aivopfx Aanod • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Godoyvau Eepfx Aanekd

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Gsdjyvav Nepfx Aanokd

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). Gkodpfxsz Nyqwo Aanjd "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Gedpfx Asyxfmyjanekd

Condition: used, HELMUT FISCHER X-ray fluorescence measuring device / coating thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for coating thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional coatings, corrosion protection coatings and various metallic coatings and is used in quality assurance, laboratories, research and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Gksdpez Egi Rsfx Aanod Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive coating thickness measurement Suitable for functional coatings and corrosion protection coatings Large measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Mains connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is explicitly sold untested and without warranty. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Due to its size and weight, shipping is possible by forwarding agent. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.