Used Deep Drilling Machine for sale (66,013)

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Emergency stop switch. Runs in both left and right directions. Table dimensions: 660x560mm Maximum drilling depth: 150mm Drilling depth is adjustable. Head and table are height-adjustable. Laedszfqz Tepfx Al Nsc Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Contact us for shipping options! €2,500.00

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Lsdpfxszff A Es Al Nsac Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Laedpfozcnnasx Al Njc Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Ljdpfx Aley Ih Tzo Nsac Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), 10 x Deep-hole drill bits, manufacturer Botek 3 pieces, 6.5 x 320 mm 2 pieces, 10.2 x 190 mm 3 pieces, 10.4 x 250 mm 1 piece, 11 x 350 mm Lsdpjhl Awdofx Al Neac 1 piece, 11 x 270 mm Weight: 1.5 kg

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 30 mm throat 255 mm bore stroke 110 mm spindle turning speed range 80 - 3490 U/min spindle taper MT 4 table surface area 420 x 480 mm base plate 600 x 370 mm Ledpfst Smigsx Al Njac Distance spindle/table max. 700 mm distance spindle/base plate 1200 mm voltage 400 V / 50 Hz total power requirement 1,1 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 1,2 x 0,7 x 2,3 m 2-stage motor, 1.1 / 1.9 Kw, drill chuck protection, drill chuck, work table rotatable and tiltable,

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t Lajdpfxjy H Nvbs Al Nsc dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N Lsdpfx Aovcrmpsl Nsac turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1974, Bohrleistung in Stahl (-Ø 35 mm throat 1000 mm workpiece height max. 200 - 1400 mm height adjustment 745 mm base plate surface area 1200 x 930 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 4 bore spindle stroke 350 mm turning speed range 60 - 1850 U/min Lasdpfx Aotv Igtol Nsc feed range 0,09 - 1 mm/U power capacity 3,7 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Laodpfx Aetv Iklol Nsc Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 Lodpfxjfbh Ako Al Njac spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device Laodpfx Aljx Iwgqs Noc foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, Year of construction: 2001, drilling diameter 18 min Laodexbtraspfx Al Njc drilling capacity diameter max. 15 mm bore depth 90 mm throat 215 mm spindle bis 360 mm spindle 560 mm table plate 350 x 290 mm column diameter 75 mm Total height max. 1050 mm weight ca. 100 kg spindle turning speed - stepless 100 - 1800 U/min motor speeds: 700 / 1400 U/min Pole-changing motor

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm Lsdpox Iwgkofx Al Neac throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm Ljdpfx Aod Ih S Sel Njac weight of the machine ca. 2,3 t

Condition: used, bore capacity in steel (diameter) 23 mm throat 300 mm bore stroke 150 mm table-size 300 x 410 mm spindle taper MK 2 total power requirement 1,4 kW weight of the machine ca. ca. 315 kg dimensions of the machine ca. ca. 700 x 900 x 1900 mm Machine has fallen over. A sheet metal cover and 2 levers of the cross lever Lasdpfsfbh Alsx Al Njc broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.

Condition: used, bore capacity in steel (diameter) 23 / 28 mm throat 260 mm Lodpfx Aled Nxvro Neac bore stroke 120 mm tool taper MK 3 table-size 500 x 350 mm column diameter 100 mm total power requirement 1,3 kW weight of the machine ca. 400 kg dimensions of the machine ca. 800 x 600 x 1750 mm Machine info - right-left rotation - stepless speed adjustment - automatic feed 0,1/ 0,16 / 0,25

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 Laodpsxbtrgsfx Al Nec table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm Ledewugrcspfx Al Njac table-size 1280 x 500 mm surface area ca. 1250 x 480 mm turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm boring chuck Schnellspannfutter 1-13 weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Laedpfsgmu A Sox Al Nec shift of supports: 590 mm without turntable and tools

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° 6-jaw-chucks various equipment manual included Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling Laedpfed Ih Sgox Al Nec various equipment (see pictures)

Condition: used, Type Laser Processing Head Application: Metal laser cutting Compatible lasers: Fiber-laser, diode-laser, disk-laser Wavelength: ~970 - 1070 nm (1 µm lasers) Lajdpfszf Nf Dox Al Noc Max. laser power: 12 KW Focus control: Automatic control of focus position and focus diameter Focal distance: ±50 - 120 mm Z-adjustment range: ±40 mm Spot size: approximately 120 - 320 µm (depending on fiber and lens) Fiber core: e.g. 100 µm fiber possible Typical material thickness: up to ±25 mm Online auction of overhead cranes, gantry cranes, welding equipment and industrial handling assets, all originating from KSK GmbH in Schwerte, Germany. For sale (e.g. 2 KONE CXTD 16T overhead cranes (2012), 1 KONE 15T overhead crane (2009), 2 DEMAG 10T overhead cranes (1997), 1 Dieter Seifert 5T overhead crane (1991), 1 Giromatic GRMM-10-450 welding positioner / rotation system with twin rollers (2018), 1 Fronius TPS 500i digital inverter MIG/MAG welding machine (2025, unused), 1 ESAB automatic welding installation for long weld seams (2004), 2 KONE mobile gantry cranes (2012), 1 Scheffer ELV 5T mobile hall gantry crane (2004), 1 Atlas Copco GA11+FF screw compressor with integrated dryer (2012), 1 ESAB Centrovac WS 40-20 K industrial central fume extraction unit, 3 heavy duty double-sided cantilever rack systems (2018), 2 Globus jib cranes, various heavy duty clamping tables, transport frames, pallet racking and supporting workshop equipment). The online auction opens Thursday 28 May and closes Tuesday 30 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 26 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 RPM Lodpfx Aloga Tyze Neac Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout, brand SINO * Automatic longitudinal feed for the work table * Drill chuck with taper ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Ejector pin * LED work light * Cooling system * Tapping function * Digital depth stop * Milling head with motorized height adjustment * Various tools in a case

Condition: reconditioned (used), Year of construction: 2003, Drilling machine for Newel Posts. Without adjusting the machine your can drill 2 Newel Posts for mounting one Newel Post up on the other with dowel connection. The renovation of the machine is still going on. Lajdpfeg U U D Rox Al Nsc

Condition: good (used), Asquith radial drilling machine offered. Type: ODI X-travel: 910 mm Z-travel: 640 mm Stroke spindle: 350 mm Diameter spindle: 65 mm Speed max: 1550 RPM Table: 510 x 1000 mm Bed: 1280 x 795 mm Ledoh U Iaxepfx Al Neac Dimensions: 240x125x293 cm LxWxH For more information call us or send an e-mail.