Used Double Column Presse for sale (24,816)

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s Godjvuuf Eopfx Abdjil working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Gjdjx E Ukhopfx Abdeil Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Gijdpfx Abox R Eftodol +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers Giedpfx Absig T Absdsl

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Gijdpfx Aou Nc Emsbdjl Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, x-travel 17700 mm Gjdpfovkit Asx Abdeil y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t Gijdpsvuufxjfx Abdsl stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Gsdjx R U Idspfx Abdoil Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: used, Year of construction: 1986, Make: MÜLLER, Model: ZE400-20.24.1, Year of manufacture: 1986, Machine No.: 498601, Max. pressure: 400 t, Clamping area (table): 2,000 x 1,300 mm, Clamping area (ram): 2,000 x 1,300 mm, Installation height min./max.: 600-1,400 mm, Ram stroke: 800 mm, Ram adjustment: 200 mm, Table draw cushion pressure: 5-160 t, Table draw cushion stroke: 350 mm, Ram draw cushion pressure: 5-40 t, Ram cushion stroke: 125 mm, 2x two-hand operation, safety guard system, press control, 2 accessory cabinets with contents. +++ Attention: This machine is part of an online auction! +++ Giodpsx R D R Uofx Abdol

Condition: repair required (used), Year of construction: 2007, functionality: not functional, type of input current: three-phase, We are offering this Knuth X-Mill 900 CNC portal milling machine, year of manufacture 2007, which is in need of repair. The Z-axis requires repair. Machine type: X-MILL 900 CNC Serial number: 141887 Year of manufacture: 2007 Total power: 12.4 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please feel free to send us a message or give us a call. Giedpfxex Stfqj Abdel

Condition: used, Technical details: pressure: 63 t throat: 315 mm Gedpfevt Nvpox Abdjil ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Gisdpfx Ajx Sd Txsbdol Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm Giedjvuk Iispfx Abdsl table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm Gisdpfx Ajguvtlsbdjl - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: used, Year of construction: 2000, Make: DROOP + REIN, Model: T2540R50E, Year of manufacture: 2000, Serial No.: 01540, Control: Fidia, Type C20/M30, Travels X/Y/Z: 5,000 x 3,000 x 1,950 mm, 5 axes, Tool holder: SK 50, Table size: 5,000 x 3,500 mm, Spindle speed: 6,000 rpm, 60-position tool changer, Measuring system: Braankamp, Safety light barriers, 1 workbench, 3 drawer cabinets, 3 WTS trolleys, 6 WTS roller cabinets, Contents: 250 SK 50 tool holders, measuring probe, clamping devices, setup tools +++ Note: Machine is part of an online auction! +++ Gisdpfx Aox R Dr Eobdjl

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: CAM060818P1515, overall weight: 500 kg, We are offering this used vhf camfacture AG CAM 1515 Premium gantry milling machine, year of manufacture 2009. Model: CAM 1515 Premium Serial number: CAM 060818P1515 Weight: 500 kg Year of manufacture: 2009 If you have any questions or require further information, please feel free to send us a message or call us. For sale is a VHF gantry milling machine CAM 1515 Premium (CNC gantry milling machine) from our inventory. Suitable for the machining of aluminium and plastics (milling/drilling/contouring, depending on configuration/spindle). Sale includes the control panel/controller as shown in the photos. The machine can be inspected by prior arrangement. Technical details (available): Manufacturer: VHF camfacture AG (DE) Giedpfox Sryyex Abdol Model: CAM 1515 Premium Year of manufacture: 2009 S/N: CAM 0608171515 Weight: approx. 500 kg Inventory no.: 03246 Scope of delivery / collection: Scope of delivery as per photos; additional accessories/clamping devices by arrangement. Collection from site. Dismantling/loading by the buyer or by arrangement.

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Gisdpfx Absu Nfliodsl Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 1974, Pressure total: 600 ton Ram stroke: 762 mm Gedpfxoxq Tnts Abdsil Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 350 mm Table surface area : 3645 x 2140 mm Slide area: 3645 x 2140 mm Die cushion capacity in table: 120 ton Die cushion stroke: 305 mm Die cushion pad area: 2805 x 1260 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Table height over floor: 650 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Extended machine accessories

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Gijdsvuudzspfx Abdjl Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 +++ Attention: Machine is part of an online auction! +++ Giodpfx Abex Rzkxodsl

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CAM 060934A1035, overall weight: 600 kg, We are offering this used vhf camfacture AG CAM 1035 Active Pro gantry milling machine, year of manufacture 2010. Type: CAM 1035 Active Pro Serial number: CAM 060934A1035 Godpfxjx Srw Eo Abdjil Weight: 600 kg Year of manufacture: 2010 If you have any questions or need further information, please feel free to send us a message or give us a call. For sale is a vhf CAM 1035 Active Pro CNC gantry milling machine from 2010 (Made in Germany). This machine is suitable for precise operations such as milling/engraving in typical materials used for fittings/profile machining. Nameplate data: Machine no. CAM 060934A1035, weight approx. 600 kg. On-site inspection is possible by prior arrangement; loading/collection by the buyer.

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Gjdeuqdqlepfx Abdeil Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Gisdpfx Abex Ry Tfodol +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Godpswnn Rtofx Abdoil Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration 2 cushion cylinder 2 pads

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year of manufacture: 2001, Serial No.: 7.5592, Pressing force: 1,000 t, Changeable table: 2,500 x 2,100 mm, Ram surface: 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Drawing cushion table pressure: 30-200 t, Drawing cushion stroke: 300 mm, Press control with OP Siemens Simatic OP 37, Control and switch cabinets Gijdpfsx Ry Ntsx Abdol