Used Edge Banding Machine for sale (66,796)

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t Hsdpfx Asf Tdwcobuew

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts Hodpfx Abjzk N Ehousw - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Hedpoywk Elefx Abuow Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Hsdpfsu Ekbnsx Abuow Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Hsdpfx Aezr Rwhsbuew Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Hedevvkfwepfx Abujw

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Hsdpfxounrwno Abuew Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit - Milling unit - Fine milling unit Hedpfxsd Inktj Abuew - Scraper blade - Buffing unit

Condition: new, 20-09- Edge banding machine WOODLAND MACHINERY (new) Price 7300 Eur (EXW Jonava, Lithuania) Motor power 0.18 kW Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Total power 1.4 kW Heating power 1.2 kW Edge width 8-50 mm Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Air pre-heating of workpiece Hedpfx Abefdu S Hjusw Edge moulding Transport dimensions Net weight 600 kg

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Hedpfx Abowpm Igouow Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels Hjdjwlzz Tjpfx Abusw soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm Hjdpfsy Ay Akox Abujw

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Hsdefi Tkvspfx Abuew Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Hjdpfx Abeyu If Njusw Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next Hjdpfx Aowmdbrsbuow with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Hsdpfxsh U Nzpe Abujw Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: new, Year of construction: 2025, The Hebrock F 2 Hjdpfx Absi Am U Djuew The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - MAGELIS control system - For EVA-based hot-melt adhesive - Joining: 2x1.5 kW, u=12,000, 200 Hz Hedpfx Aszk Nt Esbuow - Trimming: 2x0.2 kW, automatic swivel 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper - Surface scraper - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Dust extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Cross-cutting saw unit 1976 Hsdpfsiamufex Abusw Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: Hedpfjc Tmygex Abusw • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction Hsdpfx Absy Sk T Eeujw The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Hodpfx Asfbr S Rjbuow • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher Hodpfx Astrgy Njbujw G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: excellent (used), Year of construction: 2016, I sell the fully equipped edge banding machine IDM Stefani Solution MDR T-ER4S, year 2016: Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Heating lamps Edge banding with preheating tank / AirFusion included Material pressure zone servomotoric adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotoric adjustable Corner rounding 4-motor servomotoric adjustable / Multiradius unit Radius R2 scrapers servomotoric adjustable / Multiradius unit Glue scrapers manual adjustable Polishing brushes Hodpfx Aeyw Aivjbuew Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 10-60mm Edge thickness 0,3-15mm Feeding speed up to 25m/min. PUR glue possible. FE-MA-TECH unit included Second glue tank absolutely new included. Only 344.000 meters edgenbanded ! Very good condition, fully working!

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Hedpfx Abewg E Hvouew Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm