Used Edge Glue for sale (4,410)

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Nedpfx Afsxgvcxewswk Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Njdpfx Afoi Am Ukjwewk Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Nodsi Anadepfx Afwowk Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 50 - Min. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) Nodpoxlqpdefx Afwewk - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1993, machine/vehicle number: RG III 51-2464, Offer 25489 Technical data: - Brush diameter: approx. 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 2.4 / 3.7 kW - Brush depth adjustment - 2 adjustable support blocks - Working height: 900 mm Nedozrv D Tspfx Afwowk - Space required: approx. W 900 x H 1150 x D 500 mm - Weight: approx. 150 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, number of print heads: 2, resolution (max.): 1,200 dpi, number of feeding trays: 1, total length: 1,200 mm, total width: 1,900 mm, total height: 1,650 mm, input voltage: 220 V, Demo machine. Installation within the EU included in price! RobotJet HK-SP1200WA-BH is a digital printing system for printing directly onto book edges. It enables colour and monochrome printing on both straight and rounded book edges. The system is designed for printing customised graphics, text, logos and decorative elements directly onto the edges of finished books. Productivity: up to 300 books per hour when printing on three edges. Print head – HP Number of print heads – 1 Printing resolution – 1.200 * 1.200 dpi,​ Maximum book dimensions – 350 x 350 mm,​ Length of printed edge – 5 do 350 mm,​ Thickness (width) of printed edge – 5 to 218 mm Height of printed object – 93 do 350mm,​ Type of ink – environmentally friendly water-based (CMYK),​ Width of the transport belt on the infeed table – 400 mm,​ Length of the transport surface – 1100 mm,​ Maximum mechanism speed – 10 metres/minute, 1200 edges per hour​ Practical speed – 900 edges, i.e. 300 books per hour (printing on 3 edges),​ Supported file formats – JPG, PDF, PSD, BMP, TIFF,​ Operating system – Win7/win10/Win11​ RIP – Maintop v6.1​ Connection – Wi-Fi, Gigabit Ehternet​ 3 months old demo machine Power supply: 220V 50Hz,​ Power consumption: max. 480W,​ Device dimensions (W x D x H) – 1900 x 1200 x 1650 mm standard,​ Nsdpfx Aezvzvcofwjwk Weight – 400 kg​

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,938 net. The robust Junior R1 offers all the features you would expect from a modern edge sanding machine. Its massive grey cast iron sanding unit with a powerful motor ensures maximum sanding performance. The work table, height-adjustable by spring pressure, allows for optimal belt use and safe operation. The upper section is made of heavy cast iron with an integrated three-phase motor (380 V, 2.2 kW, 2850 rpm). The machine is equipped with a built-in switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Sanding belt back panel dimensions: 850 x 150 mm. Steel table height-adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt back panel is covered with a protective pad. The machine, when connected to a central extraction system with an air speed of at least 20 m/s, is dust-certified (GS). Includes angle and mitre fence. Technical data: • Motor power: 2.2 kW • Belt size: 150 × 2280 mm • Belt speed: 22 m/sec • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: approx. 180 kg • Extraction connection Ø: 100 mm. Location: Rieth Nwjdpfex Hwr Rjx Afwok

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm Nwodpfx Afozrurijwsk edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), 4 kW motor Roller feed system Nodpjzu Ng Tjfx Afwswk Sanding belt length: 100 cm Working height: 14 cm Table with adjustable angle and height

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Njdpfezq Dczox Afwowk Machine width: 840 mm Weight: 330 kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 Nedpoztpw Njfx Afwswk For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, The edge guiding system is rarely used, equipped with sensor and possibly a warranty. Nwodpfx Afsu T Rdiswok Available quantity: 3 units

Condition: used, We offer for sale: !! ARISE web edge control!! Nwjdpfxsrlmtbs Afwek Dimensions: 3x 25cm and 1x 30cm

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels Nwedpey Scb Iefx Afwek - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width

Condition: used, Year of construction: 1993, Overview  This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data - Capacity: approx. 7,200 bph - Formats: 1.5 L / 2.0 L Nodsy Hmtwopfx Afwjwk - Application: PET - Configuration: Hotmelt labelling machine for precut paper labels

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Nwjdoy Azv Sspfx Afwsk Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 6,000 bottles/hour - Formats: 0.33 L / 0.5 L glass bottles - Application: Labelling of glass bottles (beer) - Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) - Label positions: Body / wrap label, neck / chest label Nwodjyzcyvepfx Afwok - Utilities: 400 V / 50 Hz / GND / N Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) - Glue system | Krones | Glue pump - Control system | GERNEP | Touch panel

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: Nwjdpoyzcycsfx Afwsk - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data - Capacity: approx. 12,000 bottles/hour - Speed range: approx. 3,000 – 18,000 bottles/hour - Formats: 700 ml / 750 ml / 1,000 ml glass bottles - Application: Labelling of glass bottles (spirits) Nodpfxsyy Ad Se Afwewk - Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) - Label positions: Body (front), back, neck ring, additional labels - Utilities: 400 V Scope of Delivery  - Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units - Self-adhesive units | HERMA | 2 units, up to 70 m/min - Control system | B&R | Touch panel control

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Njdjyyb Snepfx Afwswk - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators

Condition: used, Year of construction: 1996, Overview This Anker-Roland rotary labelling machine was manufactured in 1996 and is designed for the application of cold-glue labels on glass bottles. The machine is equipped with two labelling stations and four bottle plates, making it suitable for typical multi-label applications in beverage and spirits bottling lines. The configuration allows the application of neck and front labels and back labels. With a production capacity of approximately 3,000 bottles per hour at 0.7 L, the system is well suited for small to medium-sized production lines. The machine includes eight format equipment sets, covering bottle diameters from 60.5 mm to 86.5 mm, allowing flexible processing of several round bottle formats between 0.35 L and 1.0 L.   Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold-glue labelling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labelling stations: 2 Bottle plates: 4 Labelling positions: - Neck label - Front label (body label) - Back label Capacity: approx. 3,000 bottles per hour (at 0.7 L with neck, front, and back label) Labelling technology: Cold glue Bottle formats: - 0.35 L - 0.5 L - 0.7 L (3 format sets) - 1.0 L (3 format sets) Nwedpfxsyuui Ue Afwok Number of format sets: 8 Bottle diameter range: approx. 60.5 – 86.5 mm Bottle shape: Round bottles Condition: Used Availability: On request

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Nodpoyt Iltsfx Afwowk Labelling stations: - 2 labelling aggregates - 1 × Neck and front label station - 1 × Back label station (disengageable)   Glue system: - 2 glue pumps - Hot glue for neck label (tamper-evident / closure sealing) - Cold glue for front and back labels - 1 spare hot glue unit included Dimensions: - Depth: 4,300 mm - Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored  

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  Nwjdpfx Asyhgwdefwek - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L Njdpfx Afeyhgvgjwewk - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Nwedpeyhgqqefx Afwsk Technical Data:  - manufacturer: Krones, Germany - model: Contiroll - year of manufacture: 2008 - labelling applicators: 2 (wet-glue heads) - operation Direction: Right-machine, parallel on one side of the machine - production Capacity: 45.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC