Used Edge Glue for sale (4,431)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Cjdpfx Absvvkd Teujpu Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Csdpfxsvvkfds Abuepu

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Codpfx Abjvvkfqjuepu

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Cjdevvkfwepfx Abuspu

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Cpedpfxoxyiile Abueu Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Cpsdpjvvkg Ijfx Abuju

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 950 mm, working width: 250 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 150 kg, power: 0.18 kW (0.24 HP), workpiece weight (max.): 150 kg, feed rate Y-axis: 10 m/min, input frequency: 50 Hz, We offer this used FIN SC2B/250 glue application machine, year of manufacture 1997. Year of manufacture: 1997 Power: 0.18 kW Cpsdpsygbbbjfx Abuou Voltage: 380 V Phases: 3 Frequency: 50 Hz Weight: 150 kg Machine type: SC2B-250 Serial number: 970402 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Codpfx Abjw Aig Seuopu Storage location: Customer.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 3020, total length: 7,500 mm, total width: 1,900 mm, total height: 1,600 mm, 8 face grinding supports 2 upper chamfering units 2 lower chamfering units 1 thickness reduction support 1 water groove support 1 infeed roller conveyor 1000 mm 1 outfeed roller conveyor 1000 mm 1 table widening console 2 spare motors (face side) Cjdpfx Abjydmk Nsuepu Working direction: left to right

Condition: used, Oscillation ja_yes ja / nein 0 ja_yes ja/nein 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Csdewzmuwjpfx Abuopu Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. No original images available yet; image from a brochure for the same model

Condition: used, Unit 1: Glue application Unit 2: End trimming Unit 3: Flush milling Edge thickness: max. approx. 12 mm Feed speed: approx. 10 m/min Workpiece height: approx. 10 – 40 mm Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel materials with edge banding tapes. The machine enables clean edge processing through automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior joinery applications. Technical data subject to change. Cpsdsxdc D Rjpfx Abueu

Condition: used, Year of construction: 2010, The machine operates perfectly; the front glue unit requires cleaning. Fully operational Year of manufacture: 2010 Radius scraper Surface scraper Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Csdpfx Asx Hqdmsbujpu Machine no.: 200.07.011.10

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll Cpedetp T Dtepfx Abusu * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg Cpjdpjc Tmygjfx Abuou glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1997, HolzHer Edge Banding Machine 1436SE Year of manufacture: 1997 - PVC Primus, 3mm PVC cartridge system - Edge banding, flush cutting, flush milling, chamfer milling, radius milling Cpodewv Uq Aepfx Abueu - Scraper, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length: 4500mm Depth: 1020mm Height: 1630mm - Connection nozzle: 140mmØ - Minimum workpiece width: 60mm - Feed speed: 11m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strip material, 2mm for coil material - WITHOUT pre-milling unit

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Cpsdpfxjyga T Ns Abuou Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: Codpox Ngt Njfx Abujpu - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding machine HolzHer 1321, in very good working condition, regularly in use, edgebanding programs available, robust industrial machine - Pre-milling unit/jointing with spare DIA cutter - Glue application unit, upgraded a few years ago to continuous slot nozzle, pressure section - Glue height and edge thickness fully controllable via display, compatible with cartridge or granulate, PU glue possible - Panel preheating - Separate top and bottom pre-milling units - Motorized rounding unit, adjustable for 2 mm radius - Straight/angled end trimming Cpedpfx Ajxiv Efebueu - Radius scraper - Corner copying unit - Flat scraper - Buffing unit Offered in ready-to-use condition. Still regularly in use until approx. week 42/43, testing is welcome.

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: #1211, COMANDULLI Edge Grinding Machine Model EDILUX 10+4 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011, #1211 • 10 edge grinding units, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower / 2 upper chamfering units • Bevel/profile milling unit, manual height and side adjustment Cpsdpfx Absygxwmsuou • 2 pneumatic regrinding units from above • Water groove milling unit above & below, manual height and side adjustment • Separate operator panel on swivel arm • Table extension console • Water tray • Space requirement approx. 600 x 180 cm Can be inspected under power – available from mid/end of March 03/2026

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Codpfjuxqzujx Abuspu Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. Cpedjtt Da Depfx Abusu The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, edge sanding machine - made in AUSTRIA motor 2,2 kW, 400 V, 50 Hz oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence Cpsdpfx Ao Dxrgsbusu suction DM 140 mm

Condition: new, Equipped with a belt grinding tool it enables the clean, ready-to-cut finish of eight different, quickly adjustable radii by means of an oscillating sanding belt. The universal machine type RFM 320 S SET, equipped with an extra-­long machine table ensures time-saving complete machining of curved or chamfered edges in one operation. Cedpof E Nqdefx Abuopu Base version RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10 and 12.5 mm) › Chamfering equipment up to 16 mm depth (continuously) › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed unit › Suction connections Ø 80 mm inkl. premiling aggregate incl. wheels incl. pull- out table elongation Set-up dimensions approx. L x B x H in mm 1.300 x 690 x 1.010 Weight 145 kg

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Cpsdpfx Abor A Eq Rsuju Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit Csdshy Tlrjpfx Abuopu - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)