Used Emco Turn 342 for sale (158)

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Iodpfx Aeyucc Noixoaw Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, operating hours: 33,664 h, functionality: fully functional, machine/vehicle number: F5F J6 001, EMCO VMC 300 machining center, year of manufacture 1996 - Manufacturer: EMCO MAIER Ges.m.b.H., Hallein/Austria - Type: VMC 300 (vertical machining center) - Year of manufacture: 1996 - Serial No.: F5F J6 001 - Electrical documentation serial no.: F5G V05 - Connection: 400 V~, 3/PE, 50/60 Hz - I max = 24 A, I_M = 18 A, I_K = 6 kA, S6-40% - Control: Siemens Sinumerik 810M, GA3, software version 3 - Operating hour counter (on-time): approx. 33,664 h – pure on-time; according to the seller, low utilization - CE-marked - Condition: used, functional, removed from ongoing operation - Scope of delivery: Machine including complete technical documentation (wiring diagrams, Sinumerik 810M operating/programming manual). Without tools and without clamping devices. Iedjziaxispfx Aixeaw - Dismantling and collection by the buyer, at their own cost and risk.

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min control: FANUC 18 iTB total power requirement: 30 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories Iajdpfx Aephuwqjixsw approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" *

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: Maschinen-Nr. F4UT3901, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,120 mm, total width: 2,115 mm, total length: 2,220 mm, table width: 500 mm, table length: 900 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, overall weight: 2,550 kg, Equipment: documentation/manual, For sale is an EMCO milling machine, model FB-6. The Y-axis is malfunctioning when moving in the positive direction. Iedpfsyka Rcox Aixeaw Accessories included: 2 hydraulic machine vices, a mobile cabinet with sliding doors for milling tools, including 17 tool holders, a tool drawer cabinet with approximately 150 different milling cutters, and a cabinet with hinged doors containing various milling cutters. Take advantage of the opportunity to inspect this machine on-site while it is powered on and assess its condition.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various tool cassettes, collets, and 4 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable construction – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Taper: MK3 - Travel: 120 mm Iaedpsyxvqvsfx Aixew - Dimensions (L x W x H): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - Machine including drawer cabinet and various tools, tool cassettes, etc. (see pictures) - 4 RÖHM chucks (3 and 4-jaw chucks) - Complete documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality "Made in Austria": Interested? Please contact us to arrange a viewing appointment or to receive a quote.

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW Iasdpfjqn A Rrex Aixew

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. Iajdpfoytnd Ajx Aixjw The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm Iodpfx Aozczgvsixsaw o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: used, Year of construction: 2012, turning diameter 550 mm turning length 1500 mm control Fagor 8055 x-axis 108 mm Iaedpfx Aey N D Sisixjw z-axis 3000 mm

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Iasdpfx Ajd I R E Njixjw Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Iedpfxsy Iz Rms Aixsaw Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout Iaedsu N Dpmspfx Aixew - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm Isdpfeu N Avxex Aixsaw workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,000 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC620 HSCI, total height: 3,032 mm, table load: 50 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,000 W, number of axes: 3, This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details. • B-axis swivel range: ±100° • C-axis swivel range: 0–360° • Spindle torque: 33 Nm • Tool magazine: 50 positions • Table surface: Ø 400 mm • Table T-slots: 5 slots, 14 mm size, 75 mm spacing • Table height: 860 mm above floor • Transport dimensions: approx. 1600 mm x 2295 mm • Spindle hours: 11,000 Additional equipment • Automation: Lang Eco Compact 10 (fully configured/functional) • Chip conveyor: Yes • Included accessories: Extensive ISO30 tool holder package • Special feature: Custom-made workspace hood/cover Technical Specification Taper Size ISO 30 Iaodpjy Aw Nzsfx Aixow

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle Iaedsy Svz Iepfx Aixjw

Condition: excellent (used), EMCO Easy Cycle control Ijdpfx Aoy H Di Ajixsaw Working travels 450 x 350 x 400 mm Table size 800 x 400 mm Boring and milling head turnable + / - 90° Spindle taper SK40 Spindle speeds 10-5'000 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Hardness tester, fully functional Iaodpfxey H H Nfe Aixsw Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm Iajdpfx Aievwgpboxow spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system Iaedpevt Amuefx Aixow

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • Price: 30,000 € for both machines • 4th axis: Yes, mounted • Tool magazine: 30 stations Additional equipment Iaedpfeyxnmvox Aixsw • Chip conveyor • Band filter • Automation: Lang Eco Compact 10 (fully functional) • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping Iasdpfx Aijxapdcexew working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Iajdpfx Ajywfrtoixsw

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40 Iajdpfx Ajywyq Doixsw

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Iajdsy H I Hxepfx Aixew

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Iaedpfxoy H I H Ss Aixew