Used Engine Lathe for sale (22,557)

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 540 mm, spindle bore: 166 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, Mazak Slant Turn 40N CNC Lathe Model: 40N Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm (21.5”) Distance between centres: 2000mm Gsdpfxeygkw So Adbsbi Spindle Speeds: 6-3000rpm Spindle Bore: 166mm Dia. Machine with: 15 station indexing turret 3 – jaw power chuck Tool Prestter Swarf Conveyor

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Gbjdjyuchrjpfx Adbsi Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,600 mm, Empty weight: 2.940 kg Price: On request - Documentation available: Yes - CE certificate present: No Godpfxjytn Eys Adbsbi - Drive system: Conventional - Centre height [mm]: 335 - Swing over bed [mm]: 630 - Distance between centres [mm]: 2000 - Bed width [mm]: 455 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Four-jaw chuck, Removable bed, Fixed steady, Three-jaw chuck - Transport dimensions: 3900mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 2940kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 Gbodpfx Adjwnitieboi - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 2,500 mm, total width: 1,150 mm, total height: 1,350 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 260 - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 1000 - Bed width [mm]: 370 - Spindle bore [mm]: 60 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 2000 - Options: Quick-change tool post, Three-jaw chuck - Transport dimensions: 2500mm x 1150mm x 1350mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Godpsytgz Tsfx Adbsbi Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 3,400 mm, total width: 1,100 mm, total height: 1,400 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 365 - Swing over bed [mm]: 725 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 1600 - Bed width [mm]: 500 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3400mm x 1100mm x 1400mm (l x w x h) Gjdpfx Adoytghajbjbi - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm Gbedpfxsytd U Rj Adbei * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: Gsdpfsytd Ukex Adbebi * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm Spindle speeds: 36 - 2000 rpm Gedpfx Adjwv Uvfsbjbi -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 2021, CNC Turning Machine Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Max. machining diameter: 390 mm Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 mm C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyor - Touchsetter - One Touch IGF - Parts catcher - Reinforced coolant unit 8 bar Gbsdpfxsyt E A No Adbei - Extraction system

Condition: good (used), Stop, depth stop, length stop for lathe -Groove opening: 22 mm Gsdpfxod Efz Te Adbjbi -Number: 1x keystrokes available -Price: per piece -Dimensions: 130/110/H50 mm -Weight: 2.4 kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 13 kW (17.68 HP), fuel type: diesel, number of cylinders: 3, nominal power: 13 kW (17.68 HP), overall weight: 102 kg, type of cooling: water, Brand: Yanmar Model: 3TNV74F-SNNS Year of manufacture: 2024, unused Serial number: On request Gbjdpfx Adoytf Skebei Power output (kW): 13.7 max Fuel: Diesel RPM: 3000 Dimensions LxWxH (mm): 530 x 460 x 560 Weight (kg) approx.: 102 Units in stock: 10 Made in: Japan Comments: Machinery type industrial engine, new, multiple units in stock.

Condition: like new (used), Year of construction: 2017, operating hours: 100 h, functionality: unexamined, power: 102 kW (138.68 HP), fuel type: diesel, number of cylinders: 4, overall weight: 555 kg, type of cooling: water, Brand: John Deere Model: JD4045PWL Year of manufacture: 2017 Serial number: CD4045U040324 Power (kW): 102 Engine model: Turbo Stage III Gbsdpfx Adjytf Rmebei Fuel: Diesel Dimensions LxWxH (mm): 880 x 750 x 1070 Weight (kg) approx.: 555 Units in stock: 1 Manufactured in: France Comments: Engine for construction machinery, suitable for telescopic handler Manitou MLT840/1040

Condition: ready for operation (used), total length: 10,700 mm, total width: 3,700 mm, Beiteldraaibank - met 2 beweegbare beitelgeleiders - voor elektromotoren, pompen, ankers etc. Beweegbare centra Dwarsslede: 500 mm verstelbaar Gbodpfxeyru Ewe Adbsi Middenhoogte: 1000 mm (eenvoudig instelbaar) Met Asea-motor 31 kW (variabele snelheid) Distance between centers: 7300 mm Swing over bed: 3400 mm (expandable) Swing in gap: 3400 mm Power on main spindle: 30 hp Number of speeds: 9 -> 27 rpm Chuck (3/4 pinch) -- diametre: Ø 2550 mm Max weight between centers: 12000 kg

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m Gbedpfxex D Ufme Adbji with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws *

Condition: used, Year of construction: 2001, Technical details: faceplate diameter: 2000 mm swing diameter: 2130 mm turning height: 1400 mm ram stroke range: 1000 mm workpiece weight: 10 t faceplate turning speed range: 1 -200 U/min main drive: 60 kW total power requirement: 95 kW Godsvb A Uzepfx Adbjbi weight of the machine ca.: 24 t dimensions of the machine ca.: 6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor *

Condition: used, Year of construction: 2007, Tornos Deco Sigma 20 Sliding Head Lathe, Twin Spindle 6 Axes & 2 C Axes, Spindle 1 - Main, Collet Chuck, 10,000rpm Max, 20mm Max Workpiece Diameter, Serviced by 6 Turning Tool Positions, 4 Side Mill/ Drill Positions, 2 Drive Capable, 4 End Mill Positions all Driven, Spindle 2 - Sub, Collet Chuck, 10,000rpm Max, 20mm Part Diameter Max, Serviced by 5 Turning Tool Positions, 2 Mill/Drill Positions Driven, Parts Catcher & Chute, Fanuc Series 31i Model CNC Control, Tornos Robobar SBF-532 Barfeed, 3000mm Max Bar Length, (820kg). S/No. 8277 (2007). Country of Origin: Switzerland Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Gjdpeytgc Defx Adbjbi

Condition: used, Year of construction: 2011, Tornos Deco Sigma 32 Sliding Head Lathe, Twin Spindle 6 Linear Axes & 2 C Axes, Spindle 1 - Main, Max Work Piece Diameter 32mm, Collet Chuck, 8000rpm Max, Serviced by 6 Turning Tool Positions, 4 Side Mill/Drill Positions - 2 Drive Capable, 4 End Mill/Drill Positions, 2 Turning/Mill/Drill Driven Positions, Spindle 2 - Sub, Collet Chuck, 8000rpm, Serviced by 2 Turning Tool Positions, 4 End Mill/Drill Positions, 2 Turning/Mill/Drill Driven Positions, Max Work Piece Length 110mm, Parts Catcher, Fanuc Series 31i- Model A CNC Control, Tornos Robobar SBF-232 Bar Feed, 3000mm Max Bar Length (820kg). S/No. 10736 (2011) 3550kg. Country of Origin: Switzerland Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Gbjdoytgb Topfx Adbji

Condition: used, Year of construction: 2016, Tornos Evo Deco 32/10 Sliding Head Lathe, Twin Spindle 10 Linear Axes & 2 x C Axis, Spindle 1, 5C Spindle 32mm Max Bar Diameter, Serviced by 6 Turning Tool Positions, 4 Drill/Mill End Bar Positions, All Drive Capable, 6 Side Mill/Drill Postions, 4 Drive Capable, Spindle 2 - Subspindle, ER Collet Type, Serviced by 3 Turning Tool Positions, 4 Mill/Drill End Bar Positions, All Drive Capable, Parts Grabber and Parts Hatch, 8000rpm on Main & Sub, Fanuc 31i-BS CNC Control, 240mm Max Work Piece Length, Tornos Robobar SBF-532 Bar Feed, 3 Metre Bar Length Max, 820kg. S/No. 13366 (2016) 3800kg. Country of Origin: Switzerland Gsdpsytf U Sjfx Adbsbi Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2009, Teach-in lathe VDF BOEHRINGER - DUS 630 Ti MACH-ID 9453 Make: VDF BOEHRINGER Type: DUS 630 Ti Control: Siemens Sinumrik Gjdpjyr D Dcefx Adbjbi Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1983, Centre height: 200 mm Centre distance: 1000 mm Swing diameter over bed: 540 mm Swing diameter over cross slide: 280 mm Bed width: 403 mm Spindle bore: 65 mm Spindle mount DIN 55027: Size 6 Speed range, 24 steps: 9 – 1800 rpm Feed rates, 32 longitudinal: 0.063 – 2.24 mm/rev Feed rates, 32 cross: 0.032 – 1.12 mm/rev 66 Metric threads: 0.25 – 560 mm 60 Whitworth threads: 80 – 1/16" 60 Module threads: 0.1 – 50 module 40 Diametral Pitch threads: 160 – 0.5 pitch Tailstock taper: MT 4 Drive power: 3 kW Weight: approx. 1850 kg Accessories / Special Features: • 3-axis digital readout • 3-jaw chuck Gsdpsyud Itefx Adbebi • Quick-change toolpost system "Multifix" size B • Swivelling chuck guard • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Gbsdpfx Adsw Sm U Dobsi Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: used, Year of construction: 2008, DUGARD EAGLE 100 CNC LATHE Gedpfxoyi A U Uj Adbebi MAKE DUGARD, MADE IN TAIWAN MODEL 100 YEAR 2008 CONTROL FANUC OI-TC MAX TURNING DIAMETER 260.0 mm MAX TURNING LENGTH 290.0 mm SPINDLE SPEED 6,000 RPM SPINDLE MOTOR 7.0 Kw TURRET 10 STATIONS BAR CAPACITY 52.0 mm PLUS HYDRAFEED SHORT MAGAZINE BAR FEED TOOL SETTING PROBE PARTS CATCHER COLLET CHUCK SWARF CONVEYOR TAILSTOCK 165.0MM 3 JAW CHUCK AND…..MIST EXTRACTOR CLEAN FULLY FUNCTIONAL

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, power: 2,000 kW (2,719.24 HP), fuel type: diesel, nominal power: 1,800 kW (2,447.32 HP), rotational speed (min.): 1,500 rpm, overall weight: 15,500 kg, type of cooling: air, color: grey, output voltage: 400 V, nominal power (apparent): 2,250 kVA, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Stamford / CUMMINS, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs * engine Cummins QSK60-G9 Contact - Joshua Alexander -Iron Flag Global Limited The Demo project is over so we can now sell then Assets!!! Iron Flag Power Systems (US) / Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE FOUR UNITS IN TOTAL -PLUS TWO CUMMINS CONTROL SYSTEM AND ADDITIONALS INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom Gbsdpfx Adsx R Szujbsi - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Gbedjv Dxw Rjpfx Adbei Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -