Used Engine Test Bench for sale (29,464)

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Chedpjzwvtxsfx Ab Dob Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Material testing machine Testing force in tension/compression: 500 N Overall height, without head crossbeam: 789 mm Overall width: 411 mm Overall depth: 622 mm Installation area: net footprint: 0.008 m² load frame base area: 0.196 m² specific floor load: based on typical installations: 0.85 kg/cm² with 50% safety margin: 1.28 kg/cm² Ceiling load: based on typical installations: 97 kN/cm² with 50% safety margin: 146 kN/cm² Working space depth: 105 mm Cjdpfx Aboziixls Dohb Working space height with extension arm installed pointing upwards: minimum height: 235 mm maximum height: 565 mm Working space height with extension arm installed pointing downwards: minimum height: 90 mm maximum height: 420 mm Software: testXpert III Version 1.9 Weight: approx. 78 kg with accessories Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm Chsdpfx Abexabxre Dsb morse taper 3 MK turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: ready for operation (used), functionality: fully functional, mileage: 16,444 km, power: 1,400 kW (1,903.47 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 32,260 kg, maximum load weight: 52,000 kg, overall weight: 52,000 kg, axle configuration: 8x8, next inspection (TÜV): 07/2027, fuel: diesel, color: red, gearing type: automatic, number of gears: 6, emission class: euro5, number of seats: 3, total length: 12,300 mm, total width: 3,000 mm, total height: 4,000 mm, Year of construction: 2015, operating hours: 1,563 h, operation weight: 52,000 kg, Equipment: additional headlights, air conditioning, all wheel drive, full service history, power assisted steering, Two 700 HP VOLVO engines TÜV valid until 07/2027 Chsdjxy Nb Uepfx Ab Dsb List of special equipment – see photos!

Year of construction: 2004, condition: used, Year of manufacture: May 2004 New: No Part suitable for: Renault Premium 420 Engine Attachment suited for: Trucks General condition: very good Technical condition: very good Visual appearance: very good Chjdpfx Ajzykwwsb Deb

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Cedjzv S Hfjpfx Ab Dshb Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Manufacturer: Mercedes Type: 1017 F (L F 16 TS) fire engine Year of construction: 1983 Mileage: 96262 km Next HU 2020 Engine type: F 3 L 912, diesel, 124 kW Attachments: Bachert 16 / 8 front-mounted pump Unladen weight: 6750 kg Payload: 5250 kg Length: 7600 mm Csdpfx Ajt H Rrheb Dehb Width: 2500 mm Height: 3100 mm Cubic capacity: 5638 cm3 Checkbook-maintained until 2019 with HU

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos Cjdpfeh It Trex Ab Djhb Quantity: 1 piece available -Dimensions: 460/215/H325 mm -Weight: 32 kg

Condition: used, mileage: 26,000 km, power: 195 kW (265.13 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,000 mm, total width: 2,450 mm, total height: 3,100 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, Year of construction: 2012, Equipment: ABS, AdBlue, EBS, differential lock, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Leaf spring suspension - High beam headlights - Air horn - Radio/CD player - Rotating beacon - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = General information Cab: double Technical information Number of cylinders: 6 Engine displacement: 7,146 cc Axle configuration Suspension: leaf spring suspension Front axle: Max. axle load: 5,800 kg; tire tread depth left: 90%; tire tread depth right: 90% Rear axle: dual tires; differential lock; Max. axle load: 10,900 kg; tire tread depth left (inside): 90%; tire tread depth left (outside): 90%; tire tread depth right (inside): 90%; tire tread depth right (outside): 90% Weights Unladen weight: 5,175 kg Payload: 10,825 kg GVWR: 16,000 kg Maintenance, history and condition APK (technical inspection): valid until 04.2027 Chedpfszwmzgsx Ab Dsb Technical condition: very good Optical condition: very good

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We are offering a used workbench frame from the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Codpshm Sr Ssfx Ab Dshb Included in the scope of delivery: 02x workbench stands, new Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x workbench cross members, used Material color: orange Box profile: 110 x 50 mm Clear span: 2,700 mm 08x locking pins, used Design: fully galvanized The images are for illustrative purposes. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is typically approx. 3-5 working days.

Condition: good (used), Work bench width: 2,860 mm / Height: 900 mm / Work bench depth: 800 mm We are offering a used work bench frame from the manufacturer Vogelsang for sale. Technical data for the work bench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x Work bench stands, new Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x Work bench traverses, used Material color: orange Box profile: 110 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. Chodpfx Aohm Sr Deb Dob - The work benches are supplied unassembled; - The work bench stands are pre-assembled; - The production time is usually approximately 3 - 5 working days.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We are offering a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench frames, used Material color: blue Frame profile: 76.2 - 100 mm Frame height: 900 mm Frame depth: 800 mm Incl. cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x Workbench crossbars, used Material color: orange Box profile: 85 x 40 mm Crossbar type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 800 mm Surface: possibly coated Chedpohm Stlofx Ab Djb (possibly in two parts) 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench frames are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm Here we offer a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench stands, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbeams, used Material color: orange Box profile: 85 x 40 mm Crossbeam type: GN85x41mm Clear width: 2,775 mm Chedpfx Abshm Stzj Dsb 08x Locking pins, used Design: fully galvanized 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Chedpfx Abszw U Nlj Dsb Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: excellent (used), Type: ARS-1100-AE Temperature and climate testing chamber with humidity control Air-cooled Temperature and humidity chamber Temperature range: -70°C to +180°C Rate of temperature change up to 5 K/min. Humidity range: 10 to 98% RH Internal dimensions: 1100 W x 1000 H x 1000 D mm External dimensions: 1300 W x 1955 H x 2005 D mm Approx. 1100 liters AC 400 V 3-phase, 50 Hz, 29 A Weight: approx. 765 kg Refrigerant: R404A and R23 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: Codpfx Abozvdk No Dohb 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for a Thermo Scientific Heraguard ECO 1.5 Laminar Flow Clean Bench The unit is in full working condition and ready for immediate use This laminar flow clean bench is a high-quality lab instrument manufactured by Thermo Scientific (Model: ECO 1.5). Provides a highly efficient HEPA-filtered workspace designed to protect sensitive samples and materials from airborne contamination during routine laboratory procedures. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Chodpfx Aszugdiob Djb Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), mileage: 96,939 km, first registration: 12/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: automatic, suspension: steel, total length: 6,900 mm, total width: 2,350 mm, total height: 3,120 mm, loading space volume: 2 m³, Year of construction: 2006, = Additional options and accessories = - PTO (Power Take-Off) = Notes = WATER TANK 2000L = Further information = Chodoxf I D Sjpfx Ab Dsb Cab: double Suspension: leaf spring Front axle: steered Rear axle: twin tires Gross vehicle weight: 13,000 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for more information.

Year of construction: 2026, condition: as good as new (ex-display), Professional-grade woodworking vises Precise and meticulous workmanship Made entirely of dampened, solid beech wood All important edges are rounded Surfaces are treated with environmentally friendly oil Standard equipment includes a tool drawer The two cylinder rods of the clamping jaws are precisely and securely guided within a cast part Equipped with a smooth-running trapezoidal thread spindle With a French front clamp and a German rear clamp with linear guide, two short round bar hooks, two long round bar hooks, a drawer, and an accessory drawer Finger zinc coating on the rear clamp and accessory drawer back Length of working surface without clamps: 1915 mm Width/depth of working surface without clamps: 615 mm Working height: 870 mm Length of front clamp: 520 mm Cjdsc Uydaopfx Ab Dshb Length of rear clamp: 450 mm Width of front clamp: 70 mm Width of rear clamp: 140 mm Clamping range of front clamp: 190 mm Clamping range of rear clamp: 180 mm Clamping range of front clamp to the center of the round hook: 225 mm Clamping range of rear clamp to the center of the round hook: 265 mm Plate thickness: 50 mm Length (product): 2120 mm Width/depth (product): 790 mm Height (product): 870 mm Weight (net): 91 kg Location: In stock at warehouse 54634 Bitburg

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Chsdpfx Abozu Nxio Dsb Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Chsdpfsq I Ncqjx Ab Dob Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: 2 x hinge belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TM 4 is a highly stable traveling column milling center with a T-shaped frame, featuring a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Coolant system: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Chodpfx Asq I Nkbeb Deb Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-shaped machining center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available on request ✔ 24-month warranty Technical features: Control: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Chodpfsq I Nlyox Ab Dob Tool changer: 60-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Cedexpqy Repfx Ab Djhb Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: excellent (used), mileage: 100,313 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 315 / 70 / R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2023, Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Gearbox: ZF TraXon, 12-speed, automatic Axle Configuration Tyre size: 315 / 70 / R 22.5 Brakes: Disc brakes Chsdpfeywtlzsx Ab Djb Front axle: Max. axle load: 8,000 kg; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: parabolic suspension Rear axle: Max. axle load: 13,000 kg; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: air suspension Condition Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: none

Condition: excellent (used), mileage: 19,617 km, first registration: 05/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, suspension: steel, total length: 6,760 mm, total width: 2,480 mm, total height: 3,000 mm, Year of construction: 1992, = Additional options and accessories = - PTO (power take-off) = Further information = General information Cab: double Technical information Number of cylinders: 6 Axle configuration Suspension: leaf spring Front axle: steered Rear axle: twin tyres Weights Unladen weight: 6,750 kg Payload: 6,250 kg Gross weight: 13,000 kg Condition Technical condition: very good Optical condition: very good Csdsvrkcbspfx Ab Dehb Further information Please contact Thierry Leemans for more information.