Used Extruder Shaft for sale (6,287)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Nedpfsu Di Azjx Abvjwd Foldable discharge conveyor. Radio remote control.

Condition: excellent (used), Shafts (for shredding scrap metals) for HAMMEL VZ 850. Nwodpfx Aswl D I Nebved Also grill and combs are available.

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Nwedpfx Aswnq Diebvjd Equipped with: Discharge conveyor, overband magnet, radio remote control.

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels Nodsycuuyjpfx Abvowd • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time Nwjdpfoxiu Dmox Abvjd

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue Number: 7407 TECHNICAL SPECIFICATIONS: - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: Nsdpfeymxdmex Abvewd - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.

Condition: excellent (used), Catalogue number 7867 Nodpfx Abjyab H Rjvowd TECHNICAL DATA - Feed hopper inlet: 1000x1250mm - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) Njdpfeymnk Asx Abvswd * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm Nwjdpfxeymm I Te Abvsd - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 3398, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 200 mm, blade shaft diameter: 70 mm, Equipment: CE marking, SECOND-HAND 2 SHAFTS MULTIRIP SAW COSMEC MOD. SMB200 - Max. Cutting height mm. 200 Nwsdpfx Aboywd Nkjved - Belt width mm. 400 - Adjustable feeding speed m/min 5/30 - Main motor KW 45 x 2 - Shaft diam. mm. 70 - CE rules - Year 2002

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information. Njdpfxsvt Tpts Abvjwd

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nsdpfx Abox U A Iasvjwd +++++

Year of construction: 1973, condition: used, grinding length 1600 mm Nwjdpfepid Ivsx Abvod centre height 185 mm diamter spiral cutter 55mm mm indexing 4-32 Modul length 5900 mm width 2300 mm height 2000 mm weight 7 t

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Nsdpeyhcghefx Abvowd Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Nwjdpsyhcc Aefx Abved Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Leadscrew & feed shaft lathe DREHMA DA 410x1500 / New / Demonstration machine - CE marking - Digital readout - Swing over bed: 410 mm - Swing over cross slide: 225 mm - Swing in gap: 580 mm - Turning length: 1500 mm - Spindle bore: 52 mm - Speed range / gearbox: 45 - 1800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial etc. - Tailstock MT 4 - Centralized lubrication - Motor power: 3.5 kW - Fixed & travelling steady rests Njdpfsymcv Hsx Abvewd - Multifix toolpost with inserts - 3-jaw chuck 200 mm - 4-jaw chuck 250 mm - Faceplate - Chuck guard - Coolant system - Work lamp - Live center & drill chuck - Machine feet - Documentation Dimensions LxWxH: 1.5 x 1 x 1.6 meters / Weight: 1850 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2021, operating hours: 967 h, functionality: fully functional, machine/vehicle number: 90135010410, total length: 4,300 mm, total width: 2,070 mm, total height: 3,040 mm, overall weight: 9,000 kg, hopper volume: 3,000 l, rotational speed (max.): 10 rpm, blade width: 40 mm, torque: 40,000 Nm, power: 88 kW (119.65 HP), rotor width: 900 mm, input voltage: 400 V, type of input current: three-phase, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, Schomberg twin-shaft rotary shear ES 90/135-D with base frame, hopper and Siemens S7 1212C control cabinet. Powerful 88 kW metal shredder for scrap processing, plastics recycling, or waste treatment. Nodpfew E H Npex Abvjwd

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Nedpfsyiuv Dsx Abvswd

Condition: used, Year of construction: 2016, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 6085020721, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, blade width: 20 mm, year of last overhaul: 2025, torque: 8,600 Nm, overall weight: 2,500 kg, We offer this used Eric Schomberg ES60/85 rotary shear, twin-shaft rotary shear, year of manufacture 2016. Nodpfsyiuh Hjx Abvjwd Manufacturer: Eric Schomberg Model: ES60/85 Year of manufacture: 2016 Condition: used Machine type: rotary shear, twin-shaft rotary shear If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: new, fitted in Hammel VB650/750 Lindner U75 Nsdpfsfgl Nasx Abvswd Arjes VZ750 Shredder Shafts ( NEW ) in set MADE IN GERMANY all types availlable WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 all types availlable Nsdpfxjfg Adls Abvjwd WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. We impress with our high level of workmanship and quality. Delivery time by arrangement WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0002517 - Manufacturer Code: 4-008-61-0284 - Condition: As new (ex-demo/display item) - Functionality: Fully operational - Compatible Machine: - If interested, we offer a refurbishing service; please contact us. 1KG 20X20X20 Nwjdeymfldjpfx Abvjd

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical Data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of manufacture: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper volume: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Material: Wood, cardboard, plastic Accessories: Hopper Nwedpfxjx Uz N Ao Abvjd Note: The shredder is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video is available on our website or YouTube channel. Viewing, including powered demonstrations, is possible by prior arrangement at any time. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing by appointment only. Sale is ex works with prepayment, without warranty or guarantee.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Nwsdex Uz Npepfx Abvsd Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Broaching Machine for Lubrication Grooves - Maximum machinable diameter: 140 mm - Spindle bore: 40 mm - Groove length per stroke: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds Njdpfx Ajyl R Etjbvjwd - Electric chuck guard - Good / fully operational condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Subject to errors and omissions