Used Feed Line for sale (20,842)

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Ndedpfowuciwox Ah Sec Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Ndodpfx Ahoy Hcd Ss Soc

Condition: used, machine/vehicle number: 008762, Position 1: Roller Conveyors LCR-FLEXPACK Position 2: Roller Conveyors LCR-FLEXPACK Position 3: Cardboard Closing Stations LCR-FLEXPACK Position 4: Roller Conveyors LCR-FLEXPACK Njdjz Eqd Eopfx Ah Sjdc

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Nedpjz I Dc Hefx Ah Ssdc

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet Nodpfx Aoy Rk Igsh Sodc - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: new, mileage: 1 km, power: 129 kW (175.39 HP), first registration: 03/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system = Further Information = Ndjdpfoyrn Ncex Ah Soc Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, mileage: 15 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Ndsdpfxey Iciqe Ah Ssc Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Ndjdpfx Ahszxc Dmj Sjc Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: • Main line footprint: 17.5 x 5.5 m • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel Ndsdpfx Aozynlxjh Soc • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes • Robot shown in some photos

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Ndedpfx Ahjzynmvj Sec

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Njdpfx Ahozzmfaj Ssdc Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HGG RPC 1200 CNC Robot Coping Line- Year 2017. Ndedpfx Ajzrp T Ish Ssc 18 metres in feed and outfeed rollers. Staubli 6 axis robot. Kjellberg Fine Focus Plasma Unit. Dust extraction. 1200mm Capacity.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 Ndodpfjzuynhjx Ah Soc with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Nedpfx Ahjzuyxgj Sjdc Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Njdpfozuzg Esx Ah Ssdc Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Nsdpfx Ajzuzwwoh Sedc Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, 4-roll feed unit Ndedjzuz N Hopfx Ah Sec Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Year of construction: 2019, condition: ready for operation (used), Ulma weighing and packing line Complete weighing and packaging line with an Ulma multi-head weigher and an Ulma vertical bagger. This line consists of the following machinery: 1. Infeed conveyor belt; 2. Ulma multi-head weigher; 3. Ulma VTI 200 vertical bagger; 4. Outfeed conveyor belt; 5. Platform; 6. Stair; Ulma Multi-Head Weigher Manufacturer: Ulma Year: 2019 Max. weighing speed: 30 bags/minute Number of heads: 10 Volume of heads: 2.5 liters Max. weighing range: 5,000 grams Nedpjzvc Dzofx Ah Sjdc Power: 400V / 50Hz / 1kW Ulma VTI 200 Vertical Bagger The VTI 200 machine has been specifically designed for the packaging of a wide range of different product types and focuses on markets where the main requirements are simplicity, reliability, and ease of operation. The combination of pneumatic operation of the horizontal sealer and an AC motor for the draw-down belts provides the machine with great versatility for use in many different environments. The robustness of all mechanical and electrical parts, a compact design, and ease of operation, together with low maintenance requirements, make it the ideal competitively priced machine for intermediate-speed applications. The machine is operated via a 5" color touch screen with an integrated industrial PC. All machine parameters are adjusted and saved within this interface, resulting in a very flexible and quick changeover machine. Manufacturer: Ulma Model: VTI 200 Year: 2019 Capacity: Max. 70 bags/minute Film reel width max.: 600 mm Film reel outer max.: 450 mm Film reel core max.: 76 mm Power: 400V / 50Hz / 4kW The machine is equipped with the following tool: Bag Type: Pillow bag; Bag dimensions: BOPP L x W 145x145mm / Laminate L x W 170x170mm Foil width: BOPP 310mm / Laminate 365mm; Max product dimensions: 70mm

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ Nodpfxezvdk Ae Ah Sodc 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation Nedozwylrjpfx Ah Ssdc • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm Ndodey N D Nbopfx Ah Sec saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: M60I/8629, Offer Number: M60I/8629 Machinetype: feeding system for parts Make: SKAKO Type: LTD100/0234CSSL Constr. year: 2013 Nedpswi Sv Nofx Ah Sjdc dimensions: 820x540x70 capacity: 1 to daylight: 2337 mm Location: Germany

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Webasto Nodpfx Ahjxwxgho Ssdc Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 Ndedpfsyb A Swox Ah Sec KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Straightening Machine 18.26019 Passage width: max. 260 mm Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Drive power: approx. 7 kW Speed: 0 – 40 m/min Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Ndjdpfx Asyb Sa Doh Ssc Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1