Used Fence for sale (950)

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system Ijdsyrdfyepfx Abvjhw • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Iodpfx Aeyrqubebvjhw

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 Ihjdpfx Aboxfku Tjvow - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off - On/off switch on the sliding carriage - Edging length: 3200 mm

Condition: new, Year of construction: 2026, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. Iodjia N Eqjpfx Abvehw With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 Ihsdjyhziljpfx Abvsw With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm - thicknesser shaft guard - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations) Ihodsxhdtnjpfx Abvsw

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Ihsdpfow Ugpysx Abvsw Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Ihedpfx Aowt A Ecebvow

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 14,367 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: TASC 6000, bending force (max.): 320 t, working width: 4,420 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 3,680 mm, installation height: 615 mm, number of axes: 6, type of crowning: CNC-controlled, travel distance X-axis: 860 mm, back gauge adjustment: CNC-controlled, Equipment: CE marking, angle measuring system, documentation/manual, foot remote control, safety light barrier, TruBend Cell 5000 – Robotic Bending Cell 320t Complete Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB - MobileControl - Rear work area lighting - Front work area lighting - Operator comfort package with screen, mouse, and keyboard - BendGuard Ihsdpfx Asylankebvow - BendMaster 150 - Track extension 16,000 mm - NC grip re-orientation station - Double sheet detection - Right-hand side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Robust machine frame in full-steel construction, ram stress-relieved annealed - 4-cylinder upper drive - Block hydraulic system with low-noise double pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Machine control network connection Control - TRUMPF TASC 6000 Safety - Standard safety equipment

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Iodpfxoq Rb Ire Abvohw cutting length 3100 mm with rear fence

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Isdpfx Abow Nacvovehw Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Isdpfolqadhsx Abvshw Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg Iodpfx Ajifu Anebvohw good condition

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material Iedpoyfp N Dofx Abvshw - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: used, Year of construction: 1992, Carriage length: 2800 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 2800 mm Cutting depth: 145 mm Scorer: no Saw blade height adjustment: manual / hydraulic Saw blade tilt adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut scale display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Ihodoyrlzispfx Abvsw Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: excellent (used), CATALOG NUMBER: 6857 Iedpsytf Rgofx Abvshw TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: excellent (used), Catalogue number 6691 Ihodpsytd Rfefx Abvsw TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of table opening: 480/380/170/125 mm - Taper of milling spindle: MK 5 - Spindle speed: 3000 + 4500 + 6000 + 9000 rpm - Height adjustment range of spindle: 150 mm - Distance from spindle center to front edge of table: 400 mm - Maximum permitted tool diameter: 250 mm - with wooden fence jaws (can be exchanged for metal fence jaws upon request) - with Holz Her 3-roller feed unit - with heavy-duty sliding table; runs on ball bearings on precisely milled, parallel guideways Weight: approx. 800 kg Availability: short-term Isdoyq T Ihepfx Abvjhw Location: 63934 Röllbach

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard Isdsxbp Anepfx Abvjhw - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R 4 station double loader Ihodpfxjyc Uq Io Abvjw Cutting , grinding, marking and breakout. Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available.

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features Ihedpfod N Tdmex Abvjw - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: new, Bernardo motor plate shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Maximum sheet thickness * 3 mm Cutting angles 1° 30' Ihjdpfx Abjd Hxnhovsw Strokes / min 31 Working height 810 mm Back gauge 0-750 mm Table width 390 mm Motor 4,0 kW Width 2600 mm 2100 mm deep Height 1260 mm Weight CA. 1710 kg Material I a tensile strength 400 N / mm² Properties Fitted with metal high restraint, optimal for thin sheet metal Support arms on the front panel for easy editing of large panels Motorized Backgauge, precise method of Ballscrews Clearly structured control panel with integrated controller Robust steel sheeting construction for vibration-free operation Support table with erected fence on both sides High operator safety protection coverage and photo cells at the back of the machine 2-edged blade made of quality steel guarantee a clean and grafreies cutting Automatic hold-down device for the fixation of the plate Scope of delivery Cutting line illumination Motor NC Backgauge Front trays Side attacks Fender with photo cells NC BRL 401.2 Pneumatic sheet high retaining device Foot pedal with emergency stop Blades made of tool steel

Condition: good (used), Year of construction: 2011, machine/vehicle number: 08420, functionality: fully functional, edge thickness (max.): 3 mm, total length: 11,500 mm, overall weight: 8,500 kg, compressed air connection: 7 bar, Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right. IMPORTANT: Incl. LIGMATECH return conveyor WORKPIECE & MATERIAL DIMENSIONS: Min. workpiece length : 150 mm Min. workpiece width : 65 mm Min. workpiece thickness : 8 mm Max. workpiece thickness : 40 mm (with corner rounding / copy function) Max. workpiece thickness : 60 mm (without corner rounding / copy function) Smallest workpiece : 150 x 150 mm, or 300 x 65 mm Workpiece overhang : 38 mm Edge thickness min/max : 0,3 – 3,0 mm Edge width min/max : 14 – 65 mm EQUIPMENT / SPECIFICATION BASIC MACHINE - Basic machine with 80 mm wide conveyor chain as workpiece transport device - Feed speed 6 to 30 m/min, adjustable from machine control - Top pressure with pressure-loaded guided rollers and 70 mm wide V-belt - Automatic height-adjustment of top pressure (thickness) - Workpiece support with rollers, extendable up to approx. 700 mm - Infeed table IMA 63.152, 500 x 500 mm, for easy feeding of long & narrow boards - Infeed device (manually) tiltable, with 5 driven rollers from top - Adjustable infeed guide/fence via NC axis AGGREGATES / EQUIPMENT - JOINTING TRIMMING/pre-milling (08.378), 2x4.5 kW, controlled (jumping), tool-Ø 125 mm Electronic horizontal positioning Isdpfx Aewyp Nuebvshw - GLUING AGGREGATE 04.1570 Concept, driven glue roller with automatic feed stop in case of error, Quick-lock system for glue application unit, Glue roller lift-off when feed stops Edge feed controlled by light barrier, upper edge guide w. step-motor, electronically controlled - Automatic PUR pre-melting system 283.203 - 6-fold automatic roll-change edging magazine POST-PROCESSING SECTION - End-trimming (snipping) unit 08.42, horizontal version, 2 motors each 0,65 kW, 200 Hz For straight and chamfer cutting, max. working speed 30 m/min - Fine trimming unit 08.055, 0,66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding 08.348, 2 motors 0,66 kW 400V 200 Hz, HSK 25 Max. working speed 20 m/min - Profile scraper 08.516, top/bottom, for multi-profile-knives, automatic positioning by step motors, max. 4 profiles, with electro pneumatic horizontal move-in/-out - Spraying devices for cleaning agent. - Flat scraper 08.521 (glue joint scraping), top/bottom - Profile (corner-) buffing 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS open compact • Flexible edge control • Uninterrupted power supply (UPS) • Power supply 400 V, 50/60 Hz, Control voltage 24 VDC / 230 VAC Machine dimensions (occupied area when installed) L 1150 x W 300 x H 260 cm Available: October 2025

Condition: like new (used), AIGNER Bogenfräsmaster used Suitable for tools up to Ø 220 mm, Extraction connection Ø 120 mm Ijdpjymku Dsfx Abvehw Item no. 214 383 000 192 Incl. arc milling fence for spindle Ø 30 mm Item no. 214 373 000 173

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Ihjdpfxjyt Izbe Abvow Finish processing unit (Glue scraper + Buffing unit) FA 11 Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)