Used Fence for sale (950)

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Net weight approx. 6000 kg Availability: by arrangement Ihsdpjyt Tkusfx Abvsw Storage location: Rhineland-Palatinate

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Ihedpfot Ac D Uox Abvsw Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Ihedju R S Akspfx Abvjw Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F Iodpfx Aou R S Erjbvehw - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Iedou R Sy Nopfx Abvshw Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine - Ihjdpfxou R S Dhj Abvew

Condition: new, Livestock trailer hydr. wheel set with doors instead of flap and fencing. Ihjdpfx Absytd Iqevjw State: New

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package Ihodpfx Abex Nbprjvsw LCM iRelease cleaning system BrushTec ES - not included

Condition: used, Year of construction: 2011, Technical details: Iedpfxjyvfyys Abvohw x-travel: 7000 mm y-travel: 1200 mm z-travel: 1300 mm rapid travel x/y/z: 10 m/min table-size: 8.000 x 1.300 mm table load: max. 4 t/qm universal head: 5x90° plus manuell 1° tool taper: SK 50 milling head speed: 20 - 2.000 1/min power capacity: 30 kW max. torque on the spindle: Getriebe 2 stufig , 750 Nm control: HEIDENHAIN TNC 360 total power requirement: 50 KW dimensions of the machine ca.: 9,0 x 3,8 x 4,6 m weight of the machine ca.: 25,0 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Condition: excellent (used), Year of construction: 1999, Tilting Spindle Moulder Panhans Type 231, tiltable from -5 to +45 degrees Reinforced drive motor 7.5 kW with automatic motor brake Reverse/forward operation Tilt angle manually adjustable from -5 to +45 degrees with handwheel and dial gauge Height adjustment manually adjustable with handwheel and dial gauge Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm with quick-change nut Isdpfxjyrhhro Abvjhw Planed machine table, extended version with extendable workpiece support Fence with fine adjustment, main fence with Siko counter and resettable counter for easy milling depth adjustment Cast iron jaws, left 500 mm, right 500 mm, in very good condition 4-roller feed unit Haffner, with 4 speeds, reverse and forward operation Feed socket Adjustable anti-kickback device for plunge routing Extraction ports 2 x 120 mm Emergency stop switch CE mark Some parts of the machine have been repainted Very well maintained condition Dimensions approx. 2350 x 1200 x 1700 mm (LxWxH). Weight approx. 900 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see also "more offers from this supplier."

Condition: used, Year of construction: 2018, total length: 5,000 mm, total width: 1,500 mm, total height: 1,650 mm, Weight: 1.450 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1408 - Max. cutting length [mm]: 3800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 125 - Controlled axes: Tiltable, Rip fence - Electrically adjustable axes: Rip fence, Tiltable - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 19 - Transport dimensions: 5000mm x 1500mm x 1650mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Ihjdex Igayepfx Abvsw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,980 mm, total length: 2,000 mm, total width: 1,600 mm, Weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1220 - Max. cutting to feed roller opening [mm]: 210 - Max. cutting to stop opening [mm]: 390 - Max. cutting width to column [mm]: 650 - Max. total opening [mm]: 600 - Max. cutting height [mm]: 380 - Table width [mm]: 1150 - Table length [mm]: 1200 - Max. band saw width [mm]: 120 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 250 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 45 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 2000mm x 1600mm x 2980mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Ihedpfx Aoyna Dwobvow Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 Iedpfeym Rt Hjx Abvehw - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN - used - PC control with optimization, scoring unit, automatic cutting length detection, side pressure device, air cushion tables, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, cutting width: 4,200 mm, max. cutting height: 72 mm, Ihedpfx Absyrqrtovsw number of clamps: 6 pcs, max. saw unit feed: 100 m/min, max. rip fence feed: 80 m/min, main saw motor power: 11 kW, scoring saw motor power: 1.5 kW, main saw blade Ø: 300 x 30 mm, scoring saw blade Ø: 180 x 30 mm, dust extraction port Ø bottom: 140 mm, dust extraction port Ø at pressure beam: 3 x 100 mm, airflow: 5,000 m³/h, compressed air connection: 6 bar, air consumption: 140 l/min, rated current: 38 A, max. pre-fuse: 50 A Quality information: - complete basic inspection - complete basic cleaning - electrical system checked - immediately ready for operation

Condition: excellent (used), Year of construction: 1987, Max Cutting length : 2250 mm Automatic backstop, max depth : 800 mm Manual handwheel for accurate measurement 2 hand operated 2 x laser fence Green light indicator on cutting point Iodpfx Asyurl Tjbvohw 2 x extra cutting knives included Ask for WHATSAPP video presentation

Condition: used, Year of construction: 1991, pressure 320 t chamfer lenght 7250 mm distance between columns 6550 mm throat 400 mm ram - range of adjustment 270 mm stroke 270 mm table surface area 7250x400 mm dayligth 560 mm fence 5-1000 ja /nein weight of the machine ca. 53 t Central crowning Rip fence Mower adjustment Ihsdoyt Rxpepfx Abvsw Die adjustment Hydraulic ram clamping Hand/foot control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Isdpoyrfh Njfx Abvohw Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Iedpfxex Twcvo Abvehw

Condition: used, Year of construction: 2011, Technical details: x-travel: 8500 mm y-travel: 2000 mm z-travel: 1500 mm rapid travel x/y/z: 25 m/min table-size: 10.000 x 1.350 mm table load: max. 5 t/qm universal head: orthogonal 1° x 1° tool taper: SK 50 milling head speed: 4.000 1/min power capacity: 37 kW max. torque on the spindle: 900 Nm internal coolant system feed: 15 bar control: HEIDENHAIN iTNC 530 Tool changer: 60 Pos. total power requirement: 75 KW dimensions of the machine ca.: 12,7 x 5,2 x 4,6 m weight of the machine ca.: 35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, Ihsdpeytrw Tefx Abvjw controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition Ihjdpfx Aohmmfkobvjw

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition Ihjdpfxjrz Tute Abvew

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip Iedpfou Utaiox Abvshw - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz Ihodpfjx Imqljx Abvow • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Iedpfx Aex Nrmbsbvshw Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: KUKA, controller model: KRC4, number of axes: 6, These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it. Additional equipment • Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided. • Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius). • The component holder is designed for quick change. (Brauer Standard) Machine Benefits Technical Machine Benefits • Turn-tilt module (max load 2600 kg) • Mount position (assembly) track: kl4000 • Hofmann blauf. Rotary module with counter bearing • Rotary/tilting module kp2-hv 2600 hw with counter bearing for robot system // rotary-tilting module kp2-hv 2600 hw, freely programmable, maximum load 2,600 kg, maximum torque 3,900 nm, maximum tilting moment 9,250 nm, maximum rotation axis speed 50°/s, maximum tilt axis speed 25°/s Ihjdpfx Ajx D Hzmsbvjw • Turning diameter = 1,200 mm • Krc4 standard control cabinet • Design services for fixtures, grippers, positioners, or customized accessories • Closed cable ducts for installation within the system on the floor/base plate or as open cable trays for installation above the protective fence • Cda layout plan Extra Information The machine is completely new and unpacked It was build by the system integrator, but never delivered. Counter bearing for rotary-tilting module KP2 Counter bearing for rotary-tilting module KP2 11/26. This allows the KP2 to also be used as a tailstock turning device. The counter bearing is bolted to the base (Demmler) and can be adjusted on the Demmler plate in 100mm increments. Diameter = 28mm. Turning diameter = 1200mm. Workspace survey -Connection plan -Project schedules -Assembly plans Conversion and configuration Conversion and configuration of the system from a 3D CAD model to a simulation model for Cenit. Electrical and pneumatic interconnection