Used Fence for sale (1,034)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Ijdpfx Asxn Hzbeh Usbf Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, working width: 3,100 mm, pressing force: 170 t, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II Iodpjv Iftgofx Ah Uobf NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 STROKE LENGTH 180 THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 8 kW (10.88 HP), Equipment: motor brake, For sale: SAC panel saw Specifications: - Model: Prestige - Electric height and tilt adjustment with digital readout - CNC-controlled parallel fence - 7.5KW (10HP) main saw - 0.5KW scoring saw - 320cm sliding table - Braked motor - CE mark - Original manuals included Iodpfoxx T E Usx Ah Uebf - Includes multiple riving knives - Year of manufacture: 2010 - Voltage: 400V Trade-in and delivery possible Location: Burdaard, Netherlands

Condition: excellent (used), Catalogue number 7797 TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg Ibedpjxt Ii Rsfx Ah Usf ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG Ibjdsxwvdwepfx Ah Ujf technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: used, Year of construction: 2014, functionality: fully functional, planing width: 410 mm, planer shaft diameter: 72 mm, total length of planing tables: 1,800 mm, number of planer blades: 3, type of input current: three-phase, overall weight: 355 kg, input voltage: 400 V, rotational speed (max.): 6,000 rpm, - Year of manufacture: 2014 - Not repainted - After technical inspection - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V Ibjdpow H R I Sofx Ah Uef - Extraction port diameter: 100 mm Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Ijdpfx Asxllxash Ujbf Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER Iodjw Ugg Ejpfx Ah Usbf 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle Iedsxt I Adjpfx Ah Uebf - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Year 1994 Ibsdporhirzofx Ah Usf Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R SIDE FENCING REAR INTERLOCKED

Condition: excellent (used), Catalogue number 7252 TECHNICAL DATA - Spindle diameter: 25 mm - Spindle working height: 170 mm - Spindle support - Interchangeable spindle - Spindle lock - Table adjustable up/down - Original fence - 4 speed settings + right/left rotation: 3000, 4500, 6000, 9000 rpm - Table dimensions: 980x980 mm - Motor: 3 kW - Dimensions (L/W/H): 1100x1000x1370 mm - Weight: 682 kg ADVANTAGES – German production Iodpfxjrgqgyo Ah Uobf – Spindle support – Very good condition – Used milling machine Net price: 6,900 PLN Net price: 1,640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Iodpfxext Ic Ds Ah Usbf Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm Iedpfx Ahedpdcvj Uebf - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg Ibedoxg D Ayspfx Ah Uof ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm Ibodpfsrm Nfbsx Ah Usf - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation - Table dimensions: 1060 x 770 mm - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES – German-made – Used milling machine – Very good condition Isdpfx Aeqxad Hjh Ujbf Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7497 Technical data: - Shaft width: 300 mm - Table length: 2100 mm Ijdpfxeu Razho Ah Uebf - Cast iron tables - Both tables adjustable - Cast iron fence, angle adjustable - Motor approx. 2 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2100x600x960 mm - Weight: 392 kg Net price: 5300 PLN Net price: 1260 EUR depending on exchange rate 4.2 EUR (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm Iedpfsv Tczfjx Ah Ujbf - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg Isdpfjuwp Ecsx Ah Uobf ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm Iodpfx Astx T Dxjh Uobf - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 6691 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW Ibjdpfxjic N I Io Ah Uof - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue Number 7780 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife shaft Ibjdpjxqyqhjfx Ah Ujf - adjustable, tilting fence - table length: 2,060 mm - both tables adjustable THICKNESSER: - max thickness of workpiece in thicknesser: 200 mm - thicknesser shaft guard - from above: - anti-kickback fingers - toothed, driven, swivelling infeed roller - planing shaft - smooth, driven outfeed roller - 2 adjustable rollers in lower table - main motor: 3 kW - 2 feed speeds - dimensions (L/W/H): 2,190 x 800 x 970 mm - weight: 900 kg ADVANTAGES – Italian manufacture – very good condition – used surface planer-thicknesser Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down Iodpfx Aevfp Iish Usbf - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg Isdpfx Aheg Tl Rwj Uebf – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake Ibedpfx Ajxhdqgeh Ujf - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)