Used Geha Top Vision Portable for sale (1,890)

Condition: used, Year of construction: 2019, operating hours: 6,489 h, lifting height: 15,800 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 45.000 kg Pedox Ifx Iepfx Ah Ujha Please contact Sales Team for more information

Condition: ready for operation (used), Rexroth SB305 Servo Controller housing SN:88800004 + Rexroth 0 card + Rexroth 0 card + Rexroth 0 card, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about packing and shipping costs separately! Phodpfjx Eubmjx Ah Uja

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Psdoulwg Nepfx Ah Ujha Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Year of construction: 2008, condition: used, Die-cutter Phedpfjulkbysx Ah Uoa Bobst VisionCut 106 LE Year: 2008 With lateral register Description - Elevation - Platform for elevated machine - Bernoulli braking device at stripping - Braking brush at delivery - Side joggers at delivery We offer this machine cleaned, repainted and reconditioned in our factory in the Netherlands. Of course, this machine will be delivered with a new platform as well, although it does not show in the pictures yet. Availability: approx. 4 months after order.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL251EG1087, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, CNC Lathe Mori Seiki NL2500Y/700 – with Y-axis – Used & Refurbished, Immediately Ready for Use Machine in excellent condition, fully overhauled and operational. Suitable for precision machining with Y-axis and driven tools. Main specifications: - Year of manufacture: 2005 - CNC: Mori Seiki MSX-850 - Max swing diameter: 755 mm - Max turning diameter: 356 mm - Max turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-station turret - Driven tools up to 6,000 rpm Phodpfsvw Acksx Ah Uoa - Inclusive: 4 driven tool holders and 7 static holders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Other features: - Tailstock (734 mm travel, MT3 taper) - Belt-type chip conveyor - Tool presetter - Parts catcher Dimensions and weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven tool holders - 1x axial driven tool holder - 8x static tool holders (boring bar holders and standard tool holders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: ready for operation (used), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible. Phedpfx Aoun Stioh Uoa

Condition: used, Year of construction: 2007, Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: Phjdpfxjvgur Ao Ah Uoa – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Condition: used, empty load weight: 10,223 kg, maximum load weight: 27,777 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 06/2026, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,800 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, Equipment: ABS, tail-lift, Poids à vide: 10223kg, Poids total admissible: 38000kg, Certificat pharmaceutique, Espace de charge (L L H): 13.403 mm x 2.460 mm x 2.800 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 92 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Essieu relevable avant et arrière, Coffre à palette, Hayon: Dhollandia, Système de freinage électronique EBS, Porte-extincteur, Châssis boulonné, Portes battantes conteneur, Cloison ISO sans ventilateur, Enregistreur de température, Double étage avec poutres, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Scellés douaniers internationaux, Système de télématique, Disques de frein Essieu 1 reste 42mm Plaquettes usure 50%Disques de frein Essieu 2 reste 39mm Plaquettes usure 80% Disques de frein Essieu 3 reste 39,5mm Plaquettes usure 80%Mines : ATP : 11/2027 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Pedpfxew U E Izj Ah Ueha

Condition: good (used), Removed from a running Arburg 420 C 1000-350-150 Pjdpfx Aew Tkh Deh Ujha

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH Phodpfxshrdxij Ah Uea UNBEATABLE PRICE

Condition: like new (used), Year of construction: 2019, operating hours: 24 h, functionality: fully functional, type of input current: AC, working width: 1,500 mm, total width: 1,787 mm, total height: 1,953 mm, Equipment: compressor, Optical sorter with 5 different channels, sort by colours and size, for sorting grains, coffee, seeds, rice, nuts, plastic. Phsdpjwlk Ivsfx Ah Uja Hi-resolution MultiVision inspection system - targets subtlest colour variations as well as light and dark colour defects Proprietary PROsize technology - sorts products and foreign material which are the same colour as the good product using size characteristics. Machine run time is only 24 hours, we buy the machine for a project that doesn't start, the machine is like new.

Condition: new, power: 44 kW (59.82 HP), Year of construction: 2025, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Psdpfjq Nf Enex Ah Ueha 8. Ease of Maintenance: Some double rotor hammer crushers are designed with features that make maintenance and replacement of wear parts more accessible, reducing downtime. It's important to note that specific features and design aspects may vary among different models and manufacturers of double rotor hammer crushers. If you are considering using or purchasing one, it's recommended to consult the manufacturer's specifications and guidelines for proper operation and maintenance.

Condition: excellent (used), GÖTTFERT Device type: MI-3 (011.01.3) Model/ Revision 01.00-A/R For sale is a Göttfert Melt Flow Index Tester MI-3, device type 011.01.3, revision 01.00-A/R. Göttfert is one of the leading manufacturers of polymer testing equipment, particularly for MFI/MFR/MVR measurements (Melt Flow Index). This model is used for determining the melt flow index (MFR) or melt volume rate (MVR) and is intended for quality control of thermoplastics in accordance with ISO 1133 and ASTM D1238. Note Göttfert MI-3 devices are used worldwide in laboratories for precise MFI/MFR/MVR measurements. Ideal for laboratory, training, research, plastics engineering, or as a source of spare parts. Description / Function: A melt flow index tester measures the flow behavior of plastics under defined pressure and temperature conditions. Typical Applications: Material quality control Batch comparison Investigation of aging and degradation Research and development The plastic is plasticized in the heated barrel and extruded through a standard die under defined load. The determined melt index serves as a quality parameter for many plastics. Technical Specifications (complete) Device Information Model: 11.01.3 Temperature Temperature range: 50 to approx. 450°C (typical for MI-3 model) Temperature accuracy: ±0.1°C Temperature stability: ±0.1–0.2°C Multi-zone heating system Measuring System Standard barrel: Ø 9.550 ± 0.005 mm Die dimensions: Length: 8 mm Orifice: Ø 2.095 mm Very high repeatability (characteristic of Göttfert) Supports all standard MFR/MVR methods Supported test weights (model-specific) Standard: 2.16 kg Additional possible weights: 1.2 / 3.8 / 5 / 10 kg (depending on configuration) Operation Integrated color touchscreen display Graphical test control Options for automatic cutting unit (depending on model) Electrical Data: Pjdpfx Asx A Tr Ash Ujha Voltage / Frequency: 230 V / 50 Hz Power consumption: 870 VA Can be operated directly on the European power grid Scope of delivery Göttfert MI-3 melt flow index tester Various accessories and tools (dies, cleaning tools, piston tools, etc.) Operating manuals All as shown in the pictures Important Note: "The table shown in the photos is not included in the sale." Condition: used (Specifications and details are subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 1998, Transnorm roller conveyor 3800-900-855 RA2063 Make: Transnorm Roller width (RB): 855 mm Nominal/outer width (NB): 900 mm Length: 3800 mm Roller diameter: 30 mm Roller distance: 38 mm Drive motor: R32DT71D4 Eletrical Data: 380 V, 0,37 kW Podpfx Asra Hp Ujh Ujha Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2007, condition: excellent (used), We have about 200 mobile and transportable SILOS for sale. Pjdslf Ip Uepfx Ah Uoha We have both type: FREE FALL and PRESSURE type silos with a hook catch. Capacity: 20,000 liters. Dimensions: - height: 6.5 m - width: 2.5 m x 2.5 m - weight: 2500 kg Silo hatch with a diameter of DN250-free fall type, or STORZ-pressure type, with standard mounting under SILOMAT or M-tec flow mixer, PFT or other... We have also for sale both type of SILOMATS (free fall and pressure type) like PFT, M-TEC, MALTECH, MAKK, etc.

Condition: used, Year of construction: 2008, Transnorm roller conveyor 3170-900-850 RA2151 Podporg Nz Hjfx Ah Ueha Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Length: 3170 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Phjdpfx Aheuxg U Dj Uoa

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Phodpjx Niwwjfx Ah Uja Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm Podpswbdrtefx Ah Uoha -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: nsport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Year of construction: 2015, condition: like new (used), Pre-owned by Bystronic Bystronic ByAutonom 3015 Working area: 3000 x 1500 mm Laser source: CO2-ByLaser 6000Watt Blower time: 34.500 hours (wear-free magnetic turbine!) Cutting time: 16.500 hours Specifications: shuttle table system with 2 interchanging tables automatic lens cassette changer automatic nozzle centering automatic nozzle change automatic focus adjustment ByposW hinged-plate conveyor and conveyor crossfeed monitoring of cutting process CutControl ByVision, STL-SPS-controller with uninterrupted power supply (USV) for panel PC Regulazed Puls Piercing (RPP) operator panel with sensitive 15' Touchscreen reflection absorber for cutting non-ferrous and stainless materials 2 lens cassettes with (5" / 7,5") Power Saving Mode Pedpfxjhzxrus Ah Uoha Condition Messenger Maintenance Messenger Dust collector system tools and accessories more information on demand...

Condition: good (used), The scope of delivery includes: 01x steel locker incl. frame with bench, used total width: 1.220 mm total height: 2.100 mm total depth: 850 mm steel locker height: 1.700 mm steel spindle depth: 500 mm Steel spindle width: 1,220 mm Compartment dimensions: 1,590 x 400 x 500 mm (HxWxD) Central division per locker compartment Phjdpfx Ahjlluc Nj Uea rack dim. incl. bench: 1.220 x 850 x 400 mm (WxDxH) Material color: red Number of doors: 3 pieces with 6 ventilation slots Lockable by a rotary bolt lock with padlock ( padlock not included ) Please note: This is a used cabinet. There may be slight damage (eg scratches, dents, dirt or the like) may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Pjdpox Niucefx Ah Ueha Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg Pedpowbd Ibofx Ah Ueha

Condition: used, Used Alfa Laval model BTPX 205SGD-34CDP-50 stainless steel clarifier centrifuge. Skid mounted system with steam sterilization provision. Direct driven by 6.5 kW 415V 3/50 2900 rpm motor. Maximum bowl speed 9650 rpm. Includes some tools. Pedpsx Hv Tmjfx Ah Ueha

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Pjdpfxsx Hv Nbj Ah Ujha A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter