Used Ham Press for sale (12,929)

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Tsdpsyxgr Rsfx Anleb

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Tedpfx Ansy Rtg Eoljb

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Tsdpsxv A E Ssfx Anlob

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Tsdpfx Asx U Dwpenleb

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Todpfx Aolyr Adenljb

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Tedpfx Anshz Ua Soleb

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Todpfx Anszv T Iwelsb

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Todpfjzrn H Hsx Anljb

Year of construction: 1978, condition: ready for operation (used), Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible. Tjdpfx Anszrzpzslsb

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Tsdpfx Anezukthjleb

Condition: excellent (used), 6000 x 900mm. Penumatic. 2 machines. Price each. Tsdszv Rqcepfx Anlsb Contact us for more information transportation throughout Europe can be arranged

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Todpfjzv Skdjx Anlob Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: used, Year of construction: 1987, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,500 kg, Eccentric press EBU H16 Tsdpozv Sl Ijfx Anlsb Year of manufacture: 1987, 1500 kg, 1.1 kW Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Todpfxjzxqkzo Anljb Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Tjdjzxqnmspfx Anlob Pressing force: 40 t

Condition: used, Manual Press KLOPFER Maxi travel: 400 mm Throat depth: 220 mm Thrust shaft diameter: Ø 50 mm Tsdpozxg Shjfx Anlsb Ideal for all types of shafts extraction, fitting works, etc. Width: 500 mm Depth: 500 mm Total height: 1000 mm Weight: approx 100 kg

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Todpfx Ajzkl Tbenlsb Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Storage location: Nattheim. Tjdpszd Hm Nsfx Anljb

Condition: good (used), Year of construction: 1994, power: 75 kW (101.97 HP), pressing force: 315 t, ram plate width: 1,000 mm, ram plate length: 1,500 mm, year of last overhaul: 2018, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Tedpfx Aozxwz Hsnlsb Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature Tsdocwamxepfx Anleb • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Year of construction: 2002, condition: used, Formaco meat former press Model: FLL800/160/1 Todpfxjb Uaiye Anleb Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz Tedpfjhik Ezsx Anlsb - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, The motorized hydraulic press P50MR guarantees high performance and maximum precision thanks to its robust structure, entirely laser-cut without welds in the areas of greatest stress. It is equipped with an immersion motor power unit 400 [V] 50-60 [Hz], a rapid approach and return pump calibrated to 20 [bar], plus an adjustable pressure pump with a handwheel to achieve the required power. It is also equipped with a maximum pressure valve with mechanical locking to prevent overpressure, and the pressure gauge (standard) allows for extremely precise calibration of the power output. Tedpfxofvhqgj Anlob Power: 50 tons Distance between inner uprights: 800 mm Approach speed: 1800 mm/min Working speed: 350 mm/min Rapid return flow rate: 26 l/min Slow return flow rate: 5 l/min Cylinder stroke: 300 mm Cylinder bore: 135 mm Rod diameter: 70 mm Rod thread diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor power: 3 kW Maximum absorbed current: 5.5 A Weight: 500 kg Dimensions: 1550 x 800 x 1965 (h)

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Tjdpfsg Uk Eijx Anleb Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Tedpehmmfkjfx Anleb Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition