Used High Speed Punching Machine for sale (83,338)

Condition: used, Year of construction: 2007, controller manufacturer: Bosch, controller model: PNC-P, _____ Description: Control : Bosch PNC-P Movement X/Y/Z : 2070/1280 mm Technical specifications Working area:2070 x 1280 mm (2500 x 1280 mm with extension) Punching force:165 kN Max. sheet thickness:6.4 mm X- and Y-axis speeds:80/55 m/min C-axis (rotations):180 rpm Punching cycle rate:600 cycles/min Marking cycle rate:1300 cycles/min Positioning accuracy:±0.1 mm Average positioning tolerance:±0.03 mm Tools Tool stations on the linear magazine:15 with 2 clamps MultiTool:2-, 5- or 10-position Number of tools when using MultiTool:150 Rotation of all tools:360° Tool change time (single tool):4.4 sec Tool change time (MultiTool):2.2 sec Max. punching diameter:76.2 mm Max. bending height (MultiBend):25 mm Space requirements With safety light barriers, length x width:6000 x 5825 mm Ledpfx Adoyzv Rustork Height:2155 mm Weight:8000 kg Connections Total electrical power rating:14 kVA Pneumatic connection:6 bar – 8 m³/h

Year of construction: 1979, condition: used, machine/vehicle number: 79-207, jaw width: 125 mm Lodpo Avhdofx Adtork jaw height: 42 mm span width: 202 mm

Condition: good (used), jaw width: 160 mm jaw height: 50 mm span width: 0 - 305 mm span power: 5000 daN Lrsdpfx Asd D H Nfodtjk total height: 140 mm

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t Lrsdo N Hcgspfx Adtsk table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Lrjdpfxjflrhzj Adtjk Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,696 h, travel distance X-axis: 550 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 21M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details. • Installed options: Preparation for 4th and 5th axis (control cabinet ready) • Status: Powered on, fully functional • Machine hours: 5,696 h Lrodeywy Snspfx Adtsk Additional equipment • Pneumatic vices • Approximately 40 tool holders • Chip tray Technical Specification Taper Size SK 30

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder with decoiler Tooling is not included Ljdpfjywty Ejx Adtsrk If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, operating hours: 1,350 h, Very little used machine, approx. 1,350 spindle hours! Control: Fanuc 31 i Travel X-axis: 300 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Lodeyzaq Sopfx Adtork Number of tool stations: 12 positions Tool holder: HSK 32 Number of spindles: 1 Rapid traverse Z-axis: 60 m/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Max. speed: 15,000 rpm Chip conveyor

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Lrodpfx Adoyz Ap Rotjk

Condition: excellent (used), Year of construction: 2002, operating hours: 140 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,000 mm, overall weight: 12,000 kg, Equipment: safety light barrier, CNC Punching Machine Boschert TWIN / ROTA – 2023 MANUFACTURER COMPLETE OVERHAUL – EXCELLENT CONDITION For sale is a CNC punching machine Boschert TWIN / ROTA, year 2002, which underwent a comprehensive manufacturer overhaul in 2023. The machine is in exceptional technical condition and is immediately ready for production – ideal for subcontracting or companies with short-term capacity requirements. --- 🔧 Scope of Overhaul (2023): - Complete refurbishment of all axes - New motors - New wiring - New pneumatic components - Professionally serviced hydraulic system - Control system renewed - New brush tables --- ⚙️ Equipment: - Working area: 1250 x 2000 mm - 1x punching head, 360° rotatable - 1x punching head (fixed) - 8-station Revotool, including tools - Ready for immediate use – no investment required - Only approx. 140 operating hours since overhaul Ljdpfx Adsy A Sx Djtsrk --- 💡 Special Features: The machine was not just serviced but has been thoroughly modernized. All key components have been renewed or overhauled – resulting in a significantly lower failure risk compared to typical used machines. --- 🎯 Ideal for: - Subcontract manufacturing - Small and medium batch production - Companies with urgent production requirements --- 📍 Inspection and test run possible by arrangement. A video of the machine in operation can be provided upon request. If you have any questions or need more information, please feel free to send us a message or give us a call. Sale is carried out under exclusion of any warranty claims. The machine is sold in its current condition (as inspected and tested). Inspection and test run are expressly encouraged.

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler Lrodpjyx Ii Dsfx Adtjk

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm Ljdpfsylzw Hex Adtsrk stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm Ledpfowc U Nlsx Adtork table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW Ljdsvuugcspfx Adtjrk weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm Lrodpevuubajfx Adtsk no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Ledpfjyzr Hlsx Adtork

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Lsdpfx Ajyvvkwedtjrk Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Lrsdpfjx U Eiajx Adtok Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Model Heidelberg Varimatrix 105 CS, automatic die-cutting machine for die cutting, creasing, and embossing, year of manufacture 2012, format: min. 350 x 400 mm, max. 750 x 1050 mm, speed: max. 7,500 sheets/hour, operating hours: approx. 21,200, Incoterm: loaded on truck, assembly condition: in production, non-stop sheet feeder with pre-piling device, non-stop delivery with gripper edge removal, elevated by 30 cm including platform height extension, three-phase auto-transformer, hold-down device for thin or wavy material, fine adjustment system for die-cutting plate, small sheet device (min. sheet size 300 x 350 mm), mechanical double sheet control, side lays on both operator and drive side, stripping device at delivery, standard stripping frame, quick-lock chase with fixed make-ready plate, stripping station, touch-screen control, Centerline system, without compressor. Delivery date: 05-2026 Lrodpfx Aoyw H Dqedtok

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Ljdpfoyz Sg Sox Adtjrk Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Ljdpfx Aeudn Utedtjrk Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length Lrsdpfov Ic Tqsx Adtsk 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Ledjy Dgrnjpfx Adtork Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: excellent (used), Year of construction: 2001, Kaiser Punching Press Model: KSTU 4000-25-6P Press force: 4,000 kN Table size: 2,500 x 1,250 mm Ledpfx Adoyx Eu Reterk Ram surface: 2,500 x 1,100 mm Shut height: 700 mm Ram stroke: 40-250 mm Ram adjustment: 200 mm Strokes per minute: 20-100 1/min Control: Siemens S7 Required space: 4.8 x 3.2 x 4.8 m (LxWxH) Weight: 78,000 kg PBK Straightening Machine Strip width: 120 - 800 mm Strip thickness: up to 6.0 mm ARKU Decoiler Load capacity: 8,000 kg

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Tonnage: 1250 kN Lrsdpey D H H Esfx Adtsk Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed