Used Hinomoto C 174 for sale (11,232)

Condition: excellent (used), mileage: 283,609 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, first registration: 10/2020, emission class: euro6, color: white, Year of construction: 2020, French refrigerated van 3 compartments -30/+22/+4°C 2x side door Hfjdpfx Aexm Sf Aog Nen Manual gearbox Air conditioning, etc.... = Further information = Engine displacement: 1,995 cc Unladen weight: 2,705 kg Payload: 695 kg Gross vehicle weight: 3,400 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for more information.

Condition: excellent (used), Type: WKL 100/40 Climate Test Chamber, Air-Cooled with Humidity Control, -40 to +180°C Specifications for Temperature Testing: Temperature Range: -40 to +180°C Temperature stability at steady state: Temporal fluctuation in center of workspace: ±0.3 to ±1 K Spatial deviation: ±0.5 to ±2 K Rate of temperature change: Heating: 3.5 K/min Cooling: 5 K/min Heat compensation capacity: max. 1100 W Specifications for Climatic Testing: Humidification System Data Reservoir capacity: approx. 13 l Water quality: Demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% r.H.: 2 l / 24 h Temperature range: +10 to +95°C Humidity range: 10 to 98% r.H. Temperature and humidity variation (steady state): Temporal temperature fluctuation in center of workspace: ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temporal humidity fluctuation in center of workspace: ±1 to ±3% r.H. Mechanical Load Data: Maximum load on chamber floor: 25 kg Per shelf: 10 kg Total shelf load: 50 kg Access port: 50 mm diameter Interfaces: Ethernet interface (RJ45), USB interface Operational Data: Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 3.0 kW Rated current: 13.0 A Required fuse: 16A slow blow Protection class: Control cabinet IP 22 and operator panel IP 54 Heat Emission for Air-cooled Test Chambers: Hfsdpsxhf Erjfx Ag Non Max. heat emission to ambient: 2000 W Noise Measurement: Sound pressure level (free field), measured at 1 m in front and 1.6 m high: approx. 56 dB(A) Chamber Volume: approx. 100 liters Weight: 190 kg Refrigerant: R404A Important Safety Information for Buyers: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and specifications reserved!) For further questions, we are happy to assist you by phone.

Condition: used, mileage: 723,362 km, power: 243 kW (330.39 HP), first registration: 01/2012, fuel type: diesel, number of seats: 54, gearing type: automatic, next inspection (TÜV): 01/2025, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental sticker, Euro V EEV engine, gearbox type VOITH, ABS, ASR, kneeling, retarder, cruise control, digital tachograph, air conditioning, Webasto additional heating, loudspeaker, microphone, stereo system with radio, CD player, air doors at the front and wide middle door, standing places: 28, number of seats: 53 + 1, high-strength seats, interchangeable platform, roof luggage rack, grab bar, single glazing, ski basket holder, wheelchair ramp, seat belts, mobitec matrix, 2x roof hatch, electrically adjustable outside mirrors, vehicle can be covered with advertising and/or labeled. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Hedpowd Dgpjfx Ag Njfn

Condition: used, Year of construction: 1994, power: 4 kW (5.44 HP), Empty weight: 1.400 kg Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer’s data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats – A mini : 20mm – A maxi : 85mm – B mini : 12mm – B maxi : 60mm – C mini : 50mm – C maxi : 170mm Carton dispenser: suction cup picking Product feed belt: cell chain Leaflet insertion Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Hedpfx Aoxguw Uog Njfn Documentation and video in operation available

Condition: used, functionality: fully functional, mileage: 171,735 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,954 mm, overall weight: 3,500 kg, empty load weight: 2,311 kg, maximum load weight: 1,189 kg, first registration: 01/2020, next inspection (TÜV): 10/2027, loading space length: 2,800 mm, loading space width: 2,130 mm, loading space height: 400 mm, emission class: euro6, color: white, driver cabin: other, number of seats: 7, number of previous owners: 1, machine/vehicle number: XN2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit Flatbed 2.0 TDCi, 1st owner Engine oil service will be carried out free of charge upon delivery Double cab with 7 seats Low-emission Euro 6 Green environmental sticker Diesel particulate filter Air conditioning Heated windshield Light and rain sensor 6th-speed manual transmission Power steering Central locking with remote control Electric windows and exterior mirrors Driver and passenger airbags Trailer hitch 2800 kg braked towing capacity Multifunction steering wheel Radio / CD / AUX / USB / Bluetooth Bluetooth hands-free system Cruise control with km/h limiter On-board computer Fog lights Electronic Differential lock (EDL) Loading area tie-down points Payload 1189 kg Unladen weight 2311 kg Gross vehicle weight 3500 kg Loading area dimensions in mm L: 2800 W: 2130 H: 400 Wheelbase 3954 mm Engine 2.0 L - 96 kW TDCi CAT Low emissions according to Euro 6 emissions standard Errors, changes, and prior sale reserved We sell exclusively subject to our terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. Hsdpfx Agowmqvvo Nofn We are available Monday - Friday from 9:00 a.m. to 5:00 p.m. and Saturdays by appointment. Appointments can be arranged by phone outside of these opening hours. We are happy to accept your current used vehicle/equipment as part payment. Sales to businesses and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to change.

Condition: excellent (used), power: 77 kW (104.69 HP), fuel type: diesel, color: other, Year of construction: 2022, operating hours: 237 h, Equipment: air conditioning, Year of manufacture: 2022 Number of cylinders: 4 Empty weight: 5.643 kg Dimensions (LxBxH): 390 x 203 x 211 cm Steering: skid steer Engine type: Bobcat D34 BSH SV CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier V Hodpsxgc R Njfx Ag Nefn General Country of production: USA Condition CE type: CE 4-in-1 gearbox, Clearview cabin, air conditioning, air-suspended seat, superflow hydraulics, camera, ride control, 2-speed, 5-link chassis suspension, hydraulic quick coupler

Condition: good (used), Various steel holders for Multifix, size C Sold individually or as a package. Hsdpsxlpnfjfx Ag Nefn

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate Hedpexgd Rdsfx Ag Nefn 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, mileage: 533,905 km, power: 243 kW (330.39 HP), first registration: 10/2013, fuel type: diesel, number of seats: 47, gearing type: automatic, next inspection (TÜV): 10/2025, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental badge, Euro V EEV engine, VOITH gearbox, ABS, ASR, kneeling, retarder, cruise control, digital tachograph, air conditioning, Webasto additional heating, loudspeaker, microphone, stereo system with radio, CD player, air doors at the front and wide middle door, standing places: 35, number of seats: 46 + 1, high-strength seats, roof luggage rack, grab bar, single glazing, ski basket holder, wheelchair ramp, seat belts, mobitec matrix, 2x roof hatch, electrically adjustable outside mirrors, 1x stroller space, 1x wheelchair space, vehicle can be covered with advertising and/or labeled. Hsdpfewd Df Sox Ag Nsfn Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: good (used), power: 268 kW (364.38 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 14,087 h, Equipment: air conditioning, Technical information Track width: 61 cm Drive: Track Make of engine: SAA6D140E-5 Empty weight: 39.500 kg Functional Working width: 413.000 cm Condition Technical condition: good Visual appearance: good Identification Serial number: 81990 Hjdpfx Aew Uk Tpog Njfn Other information Front tyres / undercarriage remaining: 70 Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 8,225x4,13x3,385 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 1992, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Beyeler Type: C 4100x10 Year: 1992 Hfjdpfownhfqsx Ag Nsn ELGO adjustable backgauge Cutting width: 4100mm Cutting thickness: 10mm Electric Backgauge: 1100mm Throat: 80mm Total dimensions: 4900x2450x2050mm Machine-weight: 14000kg - Year: 1992 - Documentation available: No - Serial number: 1992/1805 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, machine/vehicle number: 0411490843, With new carpet Technical data: - Manufacturer: Bütfering Hfodpfx Agsu U Ry Hj Non - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - Location: in stock

Condition: new, SEW R47 DRN80M4/BE1HR/TF/EI7C/C / 01.7493730502.0001.17 gear motor with SEW 13000063 brake control, unused, 100% functional, scope of delivery as per photos Hedpou Ai Eyefx Ag Nefn

Condition: excellent (used), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1,758 mm x Height 1,800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ± 0.1 to ± 0.5 K Spatial deviation: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state condition, according to IEC 60068-3-5 (depending on chamber temperature) Hodpfxexfh Spe Ag Nefn Temporal deviation: ± 0.1 to ± 0.3 K Spatial deviation: ± 0.5 to ± 1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow fuse, provided by customer Refrigerant: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your safety as a buyer, please note the following information: The following actions are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further inquiries, please feel free to contact us by phone.

Condition: new, Year of construction: 2013, shaft A2 changeable with CALZONI MR 1800 / N5 inclusive flange FL 4 D75 ( connection tubes) ( 2 pieces available) REPARATION SET FOR RADIAL PISTON MOTOR IAM1800 / C model 2013 - new consisting of: 1 x rotary distributor 1 x distributor plate 1 x bearing wave 1 Hsdpfehpihzex Ag Nofn 1 x bearing wave 2 1 x seal kit (2 pieces available) jöma price: € 700,- / 1 set

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller Hjdew Ucz Sspfx Ag Njfn -Temperature controller: analog, 0 to 35 °C -Adjustment: with key, see photos -Voltage: up to 380 volts -Switching capacity: 30W / 50VA -Transport dimensions: 330/300/H150 mm -Weight: 1.5 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. Hfsdpfxswt A Eij Ag Nsn • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: YVX160TCO4876A, workpiece weight (max.): 8,000 kg, spindle motor power: 45,000 W, total length: 5,500 mm, total height: 5,400 mm, total width: 5,500 mm, type of input current: AC, input voltage: 380 V, workpiece diameter (max.): 2,000 mm, overall weight: 25,000 kg, workpiece height (max.): 1,200 mm, nominal power (apparent): 65 kVA, number of spindles: 2, rotary table diameter: 1,600 mm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The YV-1600-ATC+C vertical turning centre is a large, high precision and heavy duty machine. The rigid vertical column and base are meehanite castings, heavily ribbed for reduced thermal distortion and vibration damping. It is built for heavy duty turning of large size workpieces. Hfjdpfxoxl Avce Ag Non The machine has live spindle and 16 tools ATC. Machine can be dismounted and loaded on truck by use of overhead crane.

Condition: good (used), mileage: 299,126 km, power: 184 kW (250.17 HP), first registration: 01/2016, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 245/70R17.5, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,470 mm, loading space length: 6,250 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: tail-lift, Renault D12.250 4x2 - Box Body - Tail Lift 1,500 kg - A/C - Euro 6 - Automatic - Camera System MY: 04-01-2016 KM: 299,126 Chassis No.: VF640J569FB001416 Box dimensions: 625 x 247 x 230 cm Tail lift: 1,500 kg Air conditioning Euro 6 Automatic transmission Camera system = Further Information = Hfjdpjwq Nurjfx Ag Nsn AdBlue system: Yes Tire size: 245/70R17.5 Front axle: Max. axle load: 4,480 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf spring Rear axle: Twin wheels; Max. axle load: 8,480 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: air suspension gross vehicle weight: 12,000 kg tailgate: rear liftgate, 1,500 kg Technical condition: good Visual condition: good Contact VAEX The Truck Traders for more information.

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Hodpfx Aoxb Dm Iog Nsfn Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Hodpfx Agsxbrkhj Njfn Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTV 7060-5 Vibration and More ... ... Dynamic and Climatic Reliability Testing Heraeus Vötsch Temperature Test Chamber, Water-Cooled (with chamber feed-through for shaker for vibration testing) Easily test tall samples With the electrically adjustable height of the test chamber, you can easily test even extra-tall test specimens. On-site adaptation to the final shaker height is possible. Hfsdpfxexbgcro Ag Nsn Standard features, perfect down to the last detail: - Operating terminal with color touch panel - Microprocessor monitoring and control S!MCON/32*-NET - Digital I/O, potential-free - Independent, adjustable temperature limiter tmin/tmax - Adjustable software temperature limiter min./max. - Serial interface RS 232 - Volt-free contact for specimen deactivation - Water-cooled refrigeration unit - Calibration at 2 temperature points - Removable chamber floor with feed-through - 2 pipe ports Ø 50 mm and Ø 125 mm Vötsch Temperature Test Chamber VTV 7060-5 Test chamber volume: 600 liters Temperature Testing Performance: Temperature range: -70/+180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Temperature change rate, heating: 6.0 K/min Temperature change rate, cooling: 6.0 K/min Heat compensation at +20 °C: 5000 W Heat compensation at -20 °C: 5000 W Test chamber dimensions: Width 800 mm, Depth 800 mm, Height 950 mm External dimensions: Width 1225 mm, Depth 2890 mm, Height 2150 mm Height to lower edge of chamber floor min/max: 660/1380 mm Feed-through for vibration system: 710 mm Ø Feed-through for vibration system: 700/700 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Sound pressure level - 1 m in front: 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 650 kg Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers before delivery: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Delivery scope: (see picture) (Specifications and subject to change, errors and omissions excepted!) For further questions, we are happy to answer your queries by phone.

Condition: excellent (used), CTS Type: TS-70/350-10 CTS Temperature Test Chamber TS-70/350-10, water-cooled Temperature Testing: Temperature range: –70 °C to +180 °C Temperature deviation (over time): ≤ ±0.3 K Temperature change rate (according to IEC 60068-3-5): Heating: 10 K/min Cooling: 10 K/min Hfedpfxsw U A Rto Ag Nen Heat dissipation: approx. 5000 W at +20 °C approx. 5000 W at 0 °C approx. 3200 W at –40 °C Conditions for the specified values: Ambient temperature: +25 °C Rated voltage: 400 V Without test specimen No external heat source Without additional equipment Dimensions/Volume: Test chamber volume: 350 liters Internal dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 16.6 kW, Rated current: 25.7 A Refrigerant: R404A / R23 Weight: approx. 750 kg Important information for you as the buyer! The following points are carried out on our chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical changes and errors; information is subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: Hjdpfx Agsw U Awme Njfn 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm Hfsdpew S E N Tofx Ag Nen External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)