Used Horizontal Hydraulic Press for sale (29,860)

Condition: used, Year of construction: 1959, Serial No. 670/848, pressing force 150 t, travel distance 30 mm, travel time 190 ms, light curtain, manufacturer SICK, type LVU 1106-0021 +++ Attention: This machine is part of an online auction! +++ Tedpszkav Dofx Am Tja

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton Tjdpfxjvgu Has Am Tsa -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs Tedpfxsfnk I Ej Am Tja -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg Todpeyzd I Uofx Am Tea

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm Tedpfeb I Dqaex Am Tsa -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm Tedpsb A Nkbsfx Am Tea -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm Tsdeupbdgspfx Am Tja -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: good (used), Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar stroke: 25 mm Tedpfxou Scp Re Am Tja -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Tsdpovu Sqxefx Am Toa -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Tsdpfx Ajudb Hcem Toa Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Tsdpevwgqrofx Am Tea dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm Todpfxscxxrro Am Toa hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm Tjdoyuylnopfx Am Toa – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: used, Year of construction: 2022, machine/vehicle number: 042-005844/1, overall weight: 8,000 kg, This ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press is being auctioned off in our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You can find this and many other items on our platform. Further machine data: ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press, serial number 042-005844/1, year of manufacture 2022, last service 10/2025, machine in operation until 12/2025 Technical data of the press according to the nameplate: Nominal pressing force: 1000 kN Hydraulic pressure 260 bar Temperature range +15 to +35°C Nominal voltage 400 V Frequency 50 Hz Safety distance 192 mm Total weight 8,000 kg Functionality and technical data have not been tested Without further items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change Todpezk Ilaefx Am Toa This lot is being auctioned off with reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you as soon as possible.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical data: Tedpfxozn H Rvs Am Tsa - max. pressing force 160 t - max. ram stroke approx. 500 mm - average working speed approx. 92 mm/s - return speed 125 mm/s - installation height approx. 1000 mm - overhang to center of ram 360 mm - ram mounting pin 40 mm - table size 900 x 630 mm - table bore / through-hole 220 mm - table height above floor 720 mm - oil capacity approx. 200 liters - drive 400 V / 17 kW - space requirement approx. W 1150 x H 3400 x D 1850 mm - weight approx. 7500 kg

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec Tjdeyif Nrjpfx Am Tja working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Tjdpfx Aswir Dgom Toa Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 104800 € 1980.72 € 150 to 500 mm 950 x 650 mm 1200 x 750 mm 750 mm 100 mm/s 5,5 mm/s 165 mm/s 11 kW 2200 mm 2200 mm Todpfswirl Rsx Am Tja 3650 mm 9500 kg 254 bar 32 to 200 mm 120 mm 160 bar 40 mm/sec. 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to "CE" rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 80100 € 1513.89 € 60 to 350 mm 550?850 mm 600?1000 mm 600 mm 100 mm/s 10 mm/s 165 mm/s 11 kW 1950 mm 1900 mm 2850 mm 5350 kg 170 bar 24 to 150 mm 100 mm 156 bar Tsdpfx Aewiqz Rjm Tea 65 mm/sec. 470?650 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to "CE" rules

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm. Tedpfx Ajzhfzmem Tsa

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional Todpszdnzhsfx Am Tea - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Tjdpsh Aygfofx Am Tja Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 87367728, Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video Todpfermumdsx Am Tea We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bündelpresse / Bunch Press - horizontal La Fornigrafica BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Tsdpfxeh R Udwo Am Tea Einsatzlänge / Infeed length max. 820mm Pressplattengrösse / Press plates size 340 x 260 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1979, machine/vehicle number: 14256, Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Todpfxergbz Es Am Tja On Stock Emskirchen / Nürnberg - Can be test