Used Hydraulic Veneer Press for sale (24,493)

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Gbedpfxeyyqnxs Ag Hsk Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm weight of the machine ca. 2500 kg

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Gbedpfx Agox Sr Evo Hjk if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), functionality: fully functional, pressing force: 65 t, stroke length: 200 mm, table width: 600 mm, table length: 1,250 mm, throat depth: 500 mm, ram plate width: 600 mm, ram plate length: 1,250 mm, distance table to ram: 650 mm, total length: 2,300 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7 kg, Capacity: 65 tonnes Adjustable stroke: 200 mm Upper and lower table dimensions: 1250 x 600 mm Longitudinal groove in addition to transverse grooves, allowing for the installation of a bending tool. Indicative bending capacity at maximum power: 10 mm over 1000 mm (tool not supplied) Table/ram opening (open): 650 mm Table/ram opening (closed): 445 mm Throat depth: 500 mm Gbedpfx Ajyz Sgxog Hjk Machine dimensions: 2300 x 1400 x 3000 mm Weight: 7 t

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Gbodpfxod D Ryfs Ag Hjk with various punching tools

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Gjdpfx Agey Amzts Hsbk

Condition: good (used), Year of construction: 1975, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Godpfxey Amyps Ag Hebk Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Gjdpey Amxxofx Ag Hobk Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1987, machine/vehicle number: 8754-08, Offer 26124 Technical Data: - Max. working width: 6050 mm - Max. material thickness at 40 kp/mm² tensile strength, steel: 1.0 mm - at 20 kp/mm² tensile strength, aluminium: 1.5 mm - at 80 kp/mm² tensile strength, V4A: up to 0.6 mm Godpfx Asyzgqlsg Hebk - Electronic bending angle preselection - Hydraulic lifting and lowering of the upper beam and bending beam - Manual rotary shear - Drive: 400 V - Space required: approx. W 6800 x H 1550 x D 1700 mm - Weight: approx. 1900 kg

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. Gbsdpfx Agex Ry Ntj Hjk +++ Attention: Machine is part of an online auction! +++

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Godpfjyztnwox Ag Hebk 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 480,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke Gbsdpjyzr Hfsfx Ag Hjk 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack Gsdpfx Aopahmhog Hobk 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Gbodoyx Ihyopfx Ag Hek

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) Godswvva Sspfx Ag Hobk with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s Gedpfxsv Svbce Ag Hobk working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1993, pressure 100 t Gedpjvuufljfx Ag Hobk throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm Gbedpfxovuucke Ag Hok total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Gbedpfxevut H Ij Ag Hek

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Gedpfx Agjw Izrie Hjbk

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Gbsdjyutxnopfx Ag Hjk Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Gbodjyxhq Iopfx Ag Hjk Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm Gbedpfxsyxhp De Ag Hok - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Bürkle veneer press S 80, year of manufacture approx. 1982, overall dimensions: 3080 x 1550 x 1800 mm, weight 4500 kg, 80 t pressing force, 6 cylinders, pressing area 2500 x 1300 mm, heating plates have been tested, hydraulic drive, robust construction, good condition, fully functional. Price ex works. Shipping available at extra cost! Gsdpjyvhkvsfx Ag Hebk

Condition: good (used), Year of construction: 1966, machine/vehicle number: 11473, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, stroke length: 150 mm, table width: 270 mm, table length: 3,000 mm, table height: 880 mm, distance table to ram: 1,500 mm, oil tank capacity: 150 l, total length: 1,300 mm, total width: 3,250 mm, total height: 2,160 mm, overall weight: 1,500 kg, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this quality Eitel straightening press / hydraulic press / shaft straightening press. -> Year of manufacture: 1966 -> Straightening force: 40 t, 4.0 kW -> Stroke: 150 mm, max. 1500 mm between centers -> Table: 270 x 3000 mm -> Carriage with centers and dial gauges, movable; centers are spring-loaded -> Straightening stroke adjustable on the shaft via handwheel; hand lever with cam control -> Straightening stroke range approx. 20 mm by turning the hand lever with cam -> Precision straightening in hundredths of a millimeter possible -> Weight: approx. 1.5 t -> Height: approx. 2.10 m -> Original operating manual included -> Video available upon request The machine is in good condition and fully functional! Gjdpfjyzg Ttox Ag Hsbk If you have any questions or would like more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press size: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Godpfxjyu Sifs Ag Hsbk Robust construction Ideal for veneer work and panel bonding From location The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost!