Used Hydraulic Veneer Press for sale (24,365)

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R Lasdpfxjyz Sw Rj Amnja • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h Lodpfx Aeyz Rwijmnsaa

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, table width: 900 mm, total length: 3,000 mm, 100 ton press with pressing area 900 x 3000 mm, equipped with REXROTH HYAG31/2000 hydraulic press unit. Year of manufacture: 2001. The press was completely overhauled in 2025 and fitted with BUSSE heating plates up to 120 degrees Celsius and a SIEMENS-RITTAL touchscreen control panel. After basic disassembly, the press has a weight of approx. 40 tons. Includes roller conveyor and lift table. Lsdpoyxp Unjfx Amneaa

Year of construction: 1980, condition: ready for operation (used), A hydraulic press brake Steiner is available. Power: 30kW, max. pressing force: 300Mp, passage width: 2550mm, max. stroke: 240mm. Machine dimensions X/Y/Z: approx. 2700mm/2350mm/3450mm, weight: approx. 21000kg. An on-site inspection is possible. Lsdpfxey Ax U Sj Amnsaa

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition Laodpfx Aex Sr Evomnsa and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm Lasdpfx Amsyyqnxonja weight of the machine ca. 2500 kg

Condition: new, Year of construction: 2025, Pressing force: 30 tons Piston stroke: 162 mm Working range (height): 30 – 1020 mm Table width: 535 mm Air pressure: 0.75 – 0.85 MPa Air connection: 1/4″ NPT Operation type: Manual-pneumatic Net weight: 153 kg Gross weight (with packaging): 173 kg Shipping dimensions: 1940 x 770 x 340 mm Structure thickness: Frame: 10 mm Table: 10 mm Prism: 28 mm Lsdpeyi Un Hsfx Amnjaa Fully welded steel construction – durability and resistance to deformation even under intensive use. Compact dimensions – ideal for small workshops and mobile workstations. Dual control system – can be operated manually or with compressed air. Included pressure gauge – real-time pressure control. V-block table – precise positioning of workpieces. Applications: Pressing and pressing pins, bushings, and bearings Bending and straightening workpieces Assembly of structural components Service and production work

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Ledepahmhopfx Amnsaa Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: Laedpfx Amovxtrxjnea max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Laeded D Ryfspfx Amnoa with various punching tools

Condition: used, Year of construction: 2023, Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swiveling): ESA S640 CNC 15" 2D graphical display / touchscreen - CNC axes: Y1, Y2 and X - Motorized crowning system with CNC control - Hydraulic press brake valve with CE safety signals - MCS PLC safety control - Laser safety system - Backgauge X-axis: 500 mm (manually adjustable) - Upper tool clamping: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - 2 front supports, manually adjustable in height and lateral position - Power-on hours: 1184 h - Operating hours: 673 h - Year of manufacture: 2023 Technical data: - Press force: 125 t - Bending length: 3020 mm - Distance between uprights: 3050 mm - Number of axes: 3 - Oil capacity: 200 l - Total power requirement: 11 kW - Dimensions (W x H x D): 3660 x 2500 x 1340 mm Lodjy A Rc Uspfx Amnsaa - Weight: approx. 7000 kg

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. Lsdpfx Aox Ry Ntjmneaa +++ Attention: Machine is part of an online auction! +++

Condition: good (used), functionality: fully functional, pressing force: 65 t, stroke length: 200 mm, table width: 600 mm, table length: 1,250 mm, throat depth: 500 mm, ram plate width: 600 mm, ram plate length: 1,250 mm, distance table to ram: 650 mm, total length: 2,300 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7 kg, Capacity: 65 tonnes Lajdpjyz Sgxofx Amnja Adjustable stroke: 200 mm Upper and lower table dimensions: 1250 x 600 mm Longitudinal groove in addition to transverse grooves, allowing for the installation of a bending tool. Indicative bending capacity at maximum power: 10 mm over 1000 mm (tool not supplied) Table/ram opening (open): 650 mm Table/ram opening (closed): 445 mm Throat depth: 500 mm Machine dimensions: 2300 x 1400 x 3000 mm Weight: 7 t

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Lajdpfxsy Egkgo Amnja Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Lodpeyztnwjfx Amnsaa 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Laedpfx Aoyhdrremnoa Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 480,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) Ledpfx Amjyzr Hfenoaa 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm Lasdpfx Ameyx Ihysnoa table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation Lodpfx Amewvva Sjnoaa can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s Lasdpfx Amev Svbcsnoa oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1993, pressure 100 t Laodpfevuuflox Amnja throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations Lajdjvuuckopfx Amnoa with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm Lsdsvut H Ijpfx Amneaa table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Lsdpfeyutxnox Amnoaa Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: not inspected (used), Year of construction: 2002, machine/vehicle number: 125600, functionality: unexamined, pressing force: 100 t, stroke length: 500 mm, table width: 600 mm, table length: 900 mm, overall weight: 1,600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Press force: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Laedpfjyr H Nzjx Amnja MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,100 x 2,300 mm Weight: 1,600 kg External reference: 41