Used Ice-Water System for sale (44,171)

Condition: used, This listing is for the BioBase BNP32/BNP48 Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use The BNP32/BNP48 system is a fully automated clinical nucleic acid extraction platform that delivers walk-away automation, designed to minimize user intervention and reduce extraction-to-extraction variability. Ideal for both clinical and research settings, it ensures consistent performance and high-quality purified eluates. In addition to efficient nucleic acid extraction, the system offers: Onboard primary-sample handling Mixed-batch sampling Support for up to 32 or 48 samples per run, depending on the model Key Features Sample Capacity: Up to 32 (BNP32) or 48 (BNP48) samples per run Sample Volume: 20–500 µL per sample Processing Volume: 60–1000 µL Extraction Time: 8–60 minutes per round, depending on reagents Magnetic Bead Recovery: Greater than 98% Reagent Compatibility: Open system compatible with magnetic bead-based reagents Temperature Control: 8 independent heating modules with customizable lysis/elution temperatures Mixing Modes: Oscillating mixing (low/medium/high speeds) Bwjdpfx Aioxv Dl Howow Program Storage: Stores up to 50,000 programs; USB import/export supported Touch Screen: 7-inch user-friendly interface Safety Features: Auto-pause on door opening, resumes upon closure

Condition: used, This listing is for a Perkin Elmer The Protome Works System Mass PREP Station Robotic Protein Handling System. Bsdpfx Aisxzhucsweww

Condition: used, This listing is for a Thermogenesis Thermoline MT204 Thawing system The ThermoGenesis Thermoline™ plasma thawers represent the latest in rapid and reliable thawing of plasma and cryoprecipitate, designed for use in clinical and transfusion laboratory environments. These systems emphasize safety, speed, and contamination prevention. Key Features Rapid Thawing: Typical thawing time is 15–18 minutes from a core temperature of -40°C for a 220 ml plasma pack. No Water Contact: Plasma packs are suspended in individual sealed pockets, isolating them from direct water contact. This ensures: No risk of contamination. If a pack ruptures, contents are safely contained within the pocket. Agitation System: Bsdpsxzh Ipsfx Aiwoww An integrated agitation mechanism gently massages the suspended packs, accelerating the thawing process. Capacity: The MT204 accommodates up to 4 plasma bags simultaneously. Other available models include: MT210: Holds 10 plasma packs MT202: Holds 2 plasma packs Temperature Control: Standard: 35°C ±1°C MT204 also offers an optional 37°C setting for specialized thawing needs. FDA Clearance: The MT204 model is FDA-approved for the thawing of plasma and glycerolized red blood cells. User Interface: Intuitive control panel with one-touch operation and straightforward maintenance indicators.

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Bwodsxzh Rkspfx Aiwow

Condition: used, Kärcher Hot water high-pressure cleaner / steam cleaner Kärcher HDS 1195 S Eco Up to 180 bar working pressure and 1,200 l/h flow rate Hot water and steam operation up to 155 °C For sale is a used hot water high-pressure cleaner from the manufacturer Kärcher. The Kärcher HDS 1195 S Eco is suitable for professional cleaning tasks in industry, trade, and commerce. The combination of high working pressure, hot water, and steam operation allows even stubborn soils as well as oil and grease residues to be removed. Technical data: Manufacturer: Alfred Kärcher GmbH & Co. KG Type: HDS 1195 S Eco Article number: 1.028-337 Equipment type: Hot water high-pressure cleaner Country of manufacture: Germany Mains connection: 400 V / 3~ / 50 Hz Connected load: 8.2 kW Fuse rating: 16 A slow-blow Protection class: IPX5 Working pressure cold/hot water: 30–180 bar Bjdpfoz R Skysx Aiwsww Maximum permissible pressure: 198 bar Flow rate: 600–1,200 l/h Flow rate steam operation: 600 l/h Working pressure steam operation: max. 28 bar Hot water temperature: max. 98 °C according to the data plate Steam temperature: max. 155 °C Burner output: 103 kW Fuel: Diesel or heating oil EL Maximum heating oil consumption: 8.3 kg/h Fuel tank: 25 liters Detergent tanks: 20 + 17 liters Maximum water inlet temperature: 30 °C Required water inlet flow rate: min. 1,500 l/h Dimensions (L × W × H): 1,285 × 690 × 875 mm Net weight: 155 kg Gross weight: 185 kg Equipment: Hot water and steam operation Pressure and flow rate regulation Continuously variable temperature control Detergent dosing valve Integrated fuel tank Two detergent tanks Manometer for pressure indication Indicator lights for operating states Mobile unit with transport rollers Hand spray gun and spray lance as shown in the pictures Application areas: Industrial cleaning Machine cleaning Vehicle cleaning Workshop cleaning Construction machinery cleaning Agricultural operations Cleaning of production plants Removal of oil and grease Cleaning of heavily soiled surfaces Commercial and industrial applications Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Visible corrosion spots on the control panel Scope of supply: 1x Kärcher HDS 1195 S Eco hot water high-pressure cleaner Hand spray gun and spray lance as shown in the pictures Other accessories as shown in the pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions on the telephone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O Bsdpfjz Rwk Rjx Aiweww   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. Bedpfx Aiozgr I Rjwoww The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Agilent Stratagene MX3005 Real-Time PCR System. The unit is in full working condition and ready for immediate use Designed for accurate quantitative PCR, it features precise thermal control, multi-channel fluorescence detection, and user-friendly software integration, ideal for gene expression and molecular diagnostics workflows. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Bsdpfx Aijy Hrbtswoww Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Bodpfx Aszdit Toiwsww Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) Bedpfx Aijzdqcuewsww (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Product Features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) Bsdpfx Aezdqpzsiwoww We will gladly answer any further questions you may have over the phone.

Condition: used, Eos EOSINT Here, we offer an Eos EOSINT plastic laser sintering system. The following items are included with the EOS P380 system: Build chamber Powder container Overflow container 3DM 8-zone process chamber heating, 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Bjdpfxezdyxle Aiwsww Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) Bwjdpfx Ajzdy Iaeiwew (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Horiba Bwjdpfx Aiezdy Rnswjw Type: Mexa 7100D Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Bwjdpfjzd Uubjx Aiwjw Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, LDS Type: V824 + Tira Sliding Table + SPA30K Swing-arm exciter for medium forces Technical data: Sine force vector 26,689 kN (peak) Random force vector 25,355 kN (rms) Half-sine force vector 53,376 kN Mass of moving element 21.55 kg Frequency range DC - 3200 Hz Sine acceleration max. 981 m/s² Random acceleration max. 50 gn rms Velocity max. 1.78 m/s Displacement ± 12.7 mm Sliding table: W x H x D: approx. 1650 mm x 925 mm x 2450 mm Working area: 991 mm * 991 mm Usable frequency range 0 to 2000 Hz Plate thickness: 50 mm Plate weight: 94 kg Max. load: 2200 kg Condition: used Weight: Shaker approx. 1725 kg Bjdpfezg Tyhsx Aiweww Sliding table 3500 kg Scope of supply: (See images) Total weight approx. 5300 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central welding fume extraction Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62185 Year of manufacture: 2014 Nominal volumetric flow rate 3000 m³/h Nominal volumetric flow rate 50 m³/sec. Filter area 27 m² (9 units, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Power connection 400 Volt, 50 Hz. - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control system - Control cabinet fixed to the extraction system - 9 filter cartridges, type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter change - Radial fan installed at the top inside, type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Fire water connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Bwodpfx Aijz Db Niowjw Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Notes = Schmitz Cargobull SCB*S3B - Frigo Schmitz - Hooks/rail system/meat hanging - ATP/FRC - Pallet box Year of manufacture: 11-6-2020 WSM000005243735 Hooks/rail system/meat hanging Pallet box Hours: diesel 20,429 / Electric: 777 Box: 13.40 - 250 - 264 = Further Information = General Information Year of construction: 2020 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,762 kg Payload: 32,238 kg Bjdsz Dfu Nepfx Aiwjww GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Cooling engine: Diesel and electric Condition Technical condition: good Optical condition: good

Condition: excellent (used), mileage: 70,497 km, power: 132 kW (179.47 HP), first registration: 12/1991, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro1, total width: 2,450 mm, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,000 kg, General information Year of construction: 1991 Cab: single Registration number: VP-61-FH Technical information Number of cylinders: 6 Max. front axle load: 6000 kg Max. rear axle load: 10000 kg Weights Empty weight: 10.930 kg Carrying capacity: 5.170 kg GVW: 16.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Bjdpfx Aoz Avzmsiwoww When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2020, condition: used, This listing is for Agilent MagnisDx NGS Prep System The unit is in full working condition and ready for immediate use The Agilent MagnisDx is an automated benchtop system for NGS library preparation and target enrichment. It supports automated workflows using Agilent SureSelect chemistry, with barcode checking, pre-set protocols and integrated workflow automation for reproducible results Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Bsdpfjzw Dv Ijx Aiwsww This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized

Condition: excellent (used), Year of manufacture: 2022 Year of construction: 2022 Applicable material: Concrete Technical condition: very good Visual appearance: very good Damages: none Warranty: Complete set, purchased directly from first and only owner in Germany. Set is complete including 6 sensors, cables, connectors etc. Bwsdpfx Aisz S Hz Iswjw Manufacturer: Topcon JP Please contact Ernst van Hek for more information Topcon X-53x / MC-Max 3D-GNSS Excavator Kit (2022) – Full Option Specifications: Condition: Excellent, fully tested and operational. Hardware: Current generation GX-75 Touchscreen & MC-X1 Controller. Software: Running stable 3DMC v12.2. Antennas: 2x GR-i3 GNSS Receivers (Dual constellation). Sensors: 6x TS-i3 Tilt Sensors (Suitable for Triple Boom & Tiltrotator). Licenses: Fully unlocked – GPS, GLONASS, Galileo, BeiDou. Comms: Satel Easy Radio & SL100 4G Modem. Complete: Including full wiring harness, mounting plates, and heavy-duty transport case. Purchased directly from the first (German) owner

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Bjde Aa Ngzepfx Aiwoww Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: like new (used), Year of construction: 2020, Equipment: documentation/manual, BRINOX BWS 912 – Pharma-GMP Pallet Washing System – Year of Construction 2020 – Like New For sale is a high-quality pharmaceutical pallet washing system from BRINOX Process Systems, model BWS 912, year of construction 2020. The system has been used very little and is in excellent, almost new condition with minimal signs of wear. It was specifically developed for the automated cleaning, rinsing, drying, and cooling of plastic pallets under high pharmaceutical hygiene requirements. The machine is manufactured in high-quality stainless steel and features a modern SCADA control system with recipe-controlled cleaning programs. Technical Data Manufacturer: BRINOX d.o.o., Slovenia Model: BWS 912 Year of Construction: 2020 Serial Number: 1003187 Project Number: B-0001187 Condition: Like New, barely used Chamber internal dimensions: approx. 900 × 1,200 × 1,200 mm Maximum chamber load: approx. 150 kg Drying temperature: 80–120 °C Electrical connection: 400 V / 50 Hz Connected power: 39 kW Rated current: 59 A Protection class: IP54 Compressed air supply: 6 bar Sound level: below 85 dB(A) Water connection: DN25, 2–6 bar Exhaust connection: DN150 Cleaning and Drying System Fully automatic, recipe-controlled washing programs Rotating spray arms and special nozzles Integrated cleaning agent dosing Automatic rinsing and post-rinsing processes Integrated hot air drying Automatic cooling phase Heat exchanger for temperature control of the process air Cleaning rack for up to 4 plastic pallets Pallet format: 1,195 × 795 × 160 mm Control and Automation Siemens IFP 1500 multi-touch control panel SCADA process visualization Automatic and manual operating modes Recipe management and process reports User management and access control Audit trail and electronic signature functions Alarm management and process monitoring The control concept was developed in accordance with GAMP 5 and FDA 21 CFR Part 11. Equipment and Scope of Delivery Stainless steel washing and drying chamber Automatic sliding door with inflatable door seal Special pallet cleaning rack Stainless steel transport trolley Washing pumps and dosing system Heating, drying, and ventilation components Control and operating unit Associated pipelines and stainless steel components Technical documentation Extensive manufacturer documentation is available: Factory Acceptance Test (FAT) Operating and maintenance manuals HMI and SCADA user manual Maintenance plans and checklists Technical drawings and layout plans Electrical and pneumatic documentation Spare parts lists and material certificates Cleaning and loading instructions Testing and deviation protocols Bwsdpfxe Afmr Eo Aiwew Condition and Availability The system was manufactured in 2020 and has been used very rarely. Due to the short operating time and the excellent condition, it can be classified as like new. The machine is currently disassembled and stored. An inspection is possible by appointment. Location: 42699 Solingen, Germany Price: Upon request We will gladly provide further information and technical documents. Subject to prior sale.

Condition: used, 3.6 Meter Shelving Unit, 5 Levels For sale: a sturdy Metalsistem Super shelving unit with blue PVC-coated, perforated shelves. Ideal for warehouses, workshops, production facilities, archives, and commercial spaces, as well as for use in damp environments. The shelving unit is quick and easy to assemble thanks to a screwless plug-in system. Technical Data Manufacturer: Metalsistem Model: Super Bwjdpfx Ao Ad U Ixoiwew Design: Base and 2 x extension section Height: 2,104 mm Width: 3,600 mm Depth: 500 mm Bay width: 1,200 mm Maximum bay load: 1,600 kg Maximum shelf load: 150 kg with evenly distributed load Number of storage levels: 5 Shelves: Blue, PVC-coated, perforated Support frame: Galvanized steel Assembly: Plug-in system Condition: Used Product Features: Robust and durable metal construction Five blue PVC-coated, perforated shelves Flexible design of the storage levels Easy assembly thanks to the plug-in system Versatile for use in warehouses, workshops, and industry Scope of delivery: 04 x Support frame 2104 x 500 mm, galvanized 30 x Cross braces (horizontal supports for holding the shelves) 15 x Shelf, PVC-coated, blue, perforated Your partner for safe storage logistics: Assembly, disassembly & shelving inspection An efficient warehouse is the backbone of your success. We ensure that your shelving systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse clearance – we take care of the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Storage platforms for optimal use of space Shelving inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load signs. - Creation of a legally sound test report including a test label. "Everything from a single source: We would be happy to offer you a suitable bank financing option for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, Technical details: x-travel: 3002 mm y-travel: 2002 mm z-travel: 200 mm total power requirement: 9 kW cutting speed: 40 m/min high-pressure pump: max. 4.000 bar weight: ca. 5.800 kg dimensions: 3800 x 2900 x 2200 mm mm Bwsdpfxe Adr Aye Aiwew waterjet cutter, for cutting of miscellaneous materials, like f.e. Aluminium, Stainless steel, plastic ... accuracy: repeat accuracy (new machine) +/- 0.1 mm accessories: Sand (several pallets) *