Used Ima for sale (139)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Single-Sided Narrow Edge Bander IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with Servo Unit for Corner Copying MFA Year of Production: 2009 Condition: Very good Features: * Stable machine frame with mounted processing units * Electronically adjustable feed speed: 6–30 m/min (feed rate of processing units is not synchronized with full feed adjustment) * Feed chain guided in sliding rails with plastic pads and 80 mm wide rubber lining * Automatic lubrication of feed chain controlled by the machine program * Upper pressure roller: double V-belt, 70 mm wide, on ball-bearing rollers; electronically adjustable * CE-compliant machine safety * Noise-reducing and protective covers * Edge banding unit with drive enclosed in sealed oil bath and glue pot (1 main pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot system for fast replacement * Touchscreen display * End trimming saw unit for cutting excess edge at front and rear corners, including: pneumatic saw adjustment 0–25°, straight cuts, corner chamfering, automatic saw positioning for two edge thicknesses (e.g., 0.4 and 1.2 mm), and excess edge adjustment for corner copying * All processing units equipped with chip extraction * Novimat Contour series maintains high processing quality due to powerful corner copying unit and minimal spacing between workpieces (\~300 mm) Basic Technical Data: * Roll edge thickness: 0.3–3 mm * Paper, PVC, and ABS edges: 0.3–3.0 mm * Veneer: 0.5–3.0 mm * Wooden strips: 0.8–20 mm Lhjdpfjw R S Slsx Ahzob * Edge height: 14–65 mm * Maximum top edge overhang: * Up to 8 mm thickness: 5 mm * Over 8 mm thickness: 2 mm Workpiece Dimensions: * Minimum length (feed direction): 150 mm * Minimum width (for thickness ≤25 mm): 65 mm * Minimum thickness: 8 mm (without flat planer) / 12 mm (with flat planer) * Maximum thickness: * Without corner copying: 60 mm * With corner copying: 40 mm * Smallest workpiece: 150 × 150 mm or 65 × 300 mm (\*65 mm width for max thickness 25 mm) Machine Parameters: * Electronically controlled feed: 6–30 m/min (may be limited by individual units) * Workpiece protrusion beyond feed chain: * 38 mm (edge thickness 0.3–8 mm) * 30 mm (edge thickness 8.1–20 mm) Power Supply: * Voltage: 400/230 V, ±5/–10% with neutral * Frequency: 50 Hz * Control voltage: 230 V AC / 24 V * Compressed air: 8 bar * Extraction air speed: 28 m/s

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Manufacturer: IMA Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Lsdpfx Ajrur Urshzshb Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-Axis Machining Center IMA BIMA 300 Year of Production: 2009 Technical Condition: Very good Technical Data: * Work Table: 4,300 × 1,250 mm * Supports and Suction Cups: 8 supports, total 24 suction cups * Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm * Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free) Lhedpfx Ahew R S Dnjzsb * Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm * Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket * Vacuum Pumps: 2 × 90 m³/h * Protective Mats: operation in alternating mode, front access * Software: IMAWOP installed on the machine + 1 office license * Emergency Power Supply (UPS): computer power backup approx. 10 minutes * Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C * Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm * Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min * Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram * Weight: approx. 5,500 kg * Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer * Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz * Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner) CNC Control: * System: ICOS OPEN 321 (Polish language version) * Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes * Selected IMAWOP Functions: * Operation selection: drilling, milling, grooves * Graphic updates after corrections * Drilling time optimization * Graphical positioning of suction cups * Conditional and formula-based programming * Technological and tool databases * Alphanumeric names/descriptions up to 28 characters * Subprograms, manual input of machining sequences * Error/alert messages * Acceleration/deceleration control (accuracy 0.001 mm) * Automatic zeroing * Corrections from portable console Additional: IMAWOP machining program

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Lsdpfxow El Nhs Ahzehb

Condition: like new (used), Year of construction: 2021, General parameters: Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Intended use: Industrial edge processing with high precision Key features: Automation of basic functions for easy operation by one person Massive frame construction for high stability Electronically adjustable upper pressure path Two-band pressure belt for safe guidance of short parts IMA quick glue change system Program-controlled feed speed Multi-profile technology possible with automatic profile change Touch control via 21.5" industrial PC Technical parameters: Part thickness: 8–60 mm Minimum part length: 150 mm Minimum part width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Strip thickness: 0.3–3 mm Working speed: 20 m/min Lodpfjv D Rhuox Ahzehb Machine equipment: Pre-milling unit with diamond tools Cutting unit with automatic tilting (15° inclination) Milling and copying units with automatic adjustment Edging system with PUR glue option Upper and lower spray system for cleaning and maintenance of the part Rounding and polishing units for final edge treatment ICOS open control system with touch screen

Condition: used, Year of construction: 2004, Used 75 Litre IMA Model VORTEX 075 stainless steel mixer granulator. Total bowl capacity 75 litre, working capacity approx. 20 - 50 litre. Has jacketed bowl. Main impeller driven by 3,0 kW motor. Chopper blade driven by approximately 1.5 kW motor. Bowl cover is opened using with pneumatic cylinder . Also has top mounted stainless steel dust filter. Side discharge outlet with pneumatically operated valve. Includes local control panels and main switchboard. Lhsdpfx Ahowm Atmjzeb

Year of construction: 1998, condition: good (used), I sell the edge banding machine IMA HKA. Ljdpfxeg Dvrio Ahzshb Suitable for curved shaped edges Good condition, possible to test !

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Lhodpfxsh Hp Dte Ahzjb Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, Year of construction: 2017, operating hours: 3,123 h, functionality: fully functional, machine/vehicle number: 50614, For sale: used IMA Advantage 400 edge banding machine. This unit features milling aggregates and a profile scraper operated by servomotors, all controlled via computer. Additionally, 3 sets of cleaning fluids are included. The machine has recently undergone maintenance – the glue tank was refurbished, and the feed chain blocks as well as the conveyor belt were replaced. Lhjdpoww Htlofx Ahzsb The machine is operational, in constant use, and 100% functional. Current machine hours: 3,123. It has processed 628,910 linear meters. Feel free to contact me for further information or to purchase.

Condition: excellent (used), Year of construction: 2008, operating hours: 22,000 h, functionality: fully functional, feed length X-axis: 8,000 mm, feed rate X-axis: 20 m/min, total length: 8,600 mm, workpiece height (max.): 60 mm, total width: 1,700 mm, edge thickness (max.): 3 mm, total height: 1,850 mm, overall weight: 4,400 kg, compressed air connection: 7 bar, height adjustment type: electric, input voltage: 400 V, input current: 54 A, product height (max.): 60 mm, pressure: 7 bar, IMA ICOSTS control, touch panel, edge band magazine, 2x spraying devices, pre-milling unit, preheating zone, crosscut saw, straight and radius milling units, corner rounding unit, scraper unit, smoothing unit, polishing unit. Industrial machine in very good technical condition, kept in constant operational readiness. Operated in a single-shift system. The device has been used exclusively as a support unit during periods of increased order volume. A video of the machine in operation and additional photos can be provided to interested parties. Lhjdoxctwrspfx Ahzsb

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Lhodpfx Ahjxf Ewvezeb Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: used, Year of construction: 2001, functionality: fully functional, Electronically controlled CNC processing center featuring: • Standard table • Safety mats • 1 vacuum pump, 100 m³/h • IMATRONIC-NT • Lateral safety grid, right-hand side • With door and left-hand front • Portable workstation for the assembly of fixing dowels and bolts Technical data: • Processing area with standard units X/Y: 6000/1200 mm • Max. clamping height from upper edge of vacuum clamping plate (Z1): 100 mm • Max. panel thickness (Z2): depending on application • Working table height approx.: 1000 mm • Alternative field area without cycle operation (X): 2 x 2650 mm Free space in the center (X): 700 mm • With cycle operation (X): 2 x 2250 mm Free space in the center (X): 1500 mm Ljdpfxowyvfcj Ahzohb • Central lubrication • Power supply: 3/N/PE, 400/230 V • IMAwinCAD for BIMA machines including edgebanding • IMAWOP • Main spindle HSK F63, cone diameter 38 mm, 12 kW, water-cooled • 1 boring saw unit • 1 grooving saw unit • Edge gluing unit VT 61

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Data: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Extraction Machine Serial No.: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specifications: 220/380 V, 3 phases, 50 Hz Lodew Sfa Espfx Ahzohb Space Requirements: approx. 400 × 140 × 220 cm Description & Features: This rotary air rinsing machine is designed for pharmaceutical and medical applications, suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. • Fully automatic bottle cleaning and extraction • Processes up to 200 containers per minute • Includes format parts for plastic bottles Ø 44 mm × height 95 mm • Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm • Operation: Bottles are single-lane fed via conveyor and screw separator, transferred into a carousel, gripped by tongs, rotated 180°, and cleaned with nozzles (blowing) and extraction heads (suction). Bottles are then transferred to the conveyor for downstream processing. • Suitable for bottles and cans made of plastic and glass • High level of automation, GMP-compliant design Documentation & Manuals: • Operating manuals (German, English, Italian) • Electrical circuit diagrams • Layout drawings / guards layout • Spare parts catalog • Blowing diagram / electrical diagram • FAT and SAT documentation • Machine and operator manual in German Scope of Supply: • Complete machine • Spare parts as per catalog • All original documentation (PDFs and printed documents) • Size parts for various bottle sizes Condition: • Used, from pharmaceutical production • Immediately ready for operation after installation • Available immediately Location: Çorlu, Turkey Price: On request

Condition: like new (used), Year of construction: 2021, operating hours: 22,000 h, functionality: fully functional, total length: 4,670 mm, total height: 1,690 mm, total width: 1,370 mm, input voltage: 400 V, overall weight: 1,400 kg, compressed air connection: 6 bar, air demand: 0.2 m³/h, - Installed on April, 2021 - End of use on November, 2023 (Approximately 2 years and 7 months use) - Store from December, 2023 with vinyl wrapping Ilapak's Delta 3000 horizontal flow wrap packaging machine is PC controlled and equipped with long dwell technology for modified atmosphere packaging (MAP) and Ilapak's unique high-speed hermetic sealing technologies to cover the widest range of applications. Its heavy duty and reliable design allows the Delta 3000 to be integrated in automatic packaging systems. All Delta 3000 horizontal flow wrap machines are also available in stainless steel and bottom film feeding versions. One of the most effective ways to extend the shelf life of fresh products is to pack them in a hermetically sealed pack with a modified atmosphere (MAP – Modified Atmosphere Packaging). Our robust Delta flow wrap machines are precisely engineered to ensure hermetic sealing at high speed. Thanks to the flexibility of its design, the Delta series of packaging machines are also ideally suited for non-food applications where a hermetically sealed pack is required, such as medical and personal care products like wet wipes. Lhsdpfet Dg Itox Ahzob * Main Feature - Upgradable machine configuration - Long dwell sealing jaws technology - Separated electrical control - Electronic machine with commercial available components * Benefits - Possibility to expand & connect the machine with different feeding systems - To perform hermetic sealing and MAP applications while managing a wide range of wrapping material characteristics - Easy accessibility during maintenance operation - Higher reliability components - Easy maintenance * Technical Data - Capacity: 25 - 100spm based on 4 ~ 1 line stack - Modified Atmosphere: N₂/CO₂ Mixer including O2 analyzer - Dimension: 4,666mm(L) X 1,367mm(W) X 1,689mm(H) including infeed line - Power Supply Spec.: 3P, 400V, 50Hz, 7kVA - Air Supply Spec.: 6 bar, 0.2m³/h - Machine Speed: Up to 100 cycles per minute Production output depends on film sealability and product characteristics - Film Cut-off: Min 100mm - 4.0” / Max 1200mm - 47” Depending on film and product characteristics - Film Reel Max Weight: Depending on film reel width, up to 75 kg - 165 lbs - Electronic Platform: Industrial PC

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Lsdpfx Aoybbayshzjhb Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control system ICOS open TS, PC-based

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Lhedpjqy Em Nofx Ahzeb Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Additional equipment • Jointing cutter • Radiant heater • EVA gluing unit Lhodpfjyaqbwox Ahzeb • Roll magazine for edge material • Cutting unit • Flush milling top/bottom • MFA with 2 motors for radius r2, servo-controlled • Profile scraper unit • Surface scraper unit • Buffing unit Machine Benefits Technical Machine Benefits • Feed speed: 20 m/min Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 24,000 rpm, number of axes: 3, This IMA BIMA 410 V was manufactured in 2005. It is a CNC woodworking machining center with integrated edge banding. Features include a working area of X-axis up to 6000 mm, Y-axis 1400 mm, and Z-axis up to 100 mm. It has a main spindle power of 7.5–11 kW and a speed range of 1,500 – 24,000 rpm. The tool changer has 18 positions. Edgebanding capabilities range from 0.4–3 mm in thickness. Contact us for more information. Machine Benefits Technical Machine Benefits • Automatic rotary changer, 18 positions Lodpfx Aeyap U Aehzjhb • Vertical drilling head with up to 21 spindles (11+10) Extra Information Edgebanding Unit VT 100 For 4-sided and frontal edging Edge thickness: 0.4–3 mm Edge height: 14–64 mm

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine Lodpfxeb A S N Re Ahzshb -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Condition: ready for operation (used), Year of construction: 2012, This IMA Novimat Concept / I / G80 / 440 / R3 edgebander was manufactured in 2012. It features a robust automatic edge banding and post-processing system, including a workpiece returning system for enhanced productivity. Capable of handling edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-lock system and electronic temperature control for precise glue application. Consider the opportunity to buy this IMA Novimat Concept / I / G80 / 440 / R3 edgebander. Contact us for more information. Additional equipment • Joint Milling Unit: 2 motors, each 4.0 kW, 8800 RPM • Heater: Preheats workpiece edges up to 60 mm • Glue Application: Handles edges up to 3 mm • End Trimming Unit: 2 motors, 660 kW Lsdsx U U D Tjpfx Ahzohb • Additional Units: Milling, Multi-Profile Milling, Contour Milling, Multi-Profile Scraper, and Scraper Units; Buffing Unit • Automatic Quickmelt hot glue feeder • Board Return System with powered roller conveyors, cross conveyor, transport belt, angle transfer, air-cushion tables, and safety fence Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm Extra Information This machine is configured for efficient edge banding and post-processing with a robust set of features and support for various workpiece sizes. It is immediately available for production use.

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Ljdpfxox U U Dts Ahzohb Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,200 mm, overall weight: 7,200 kg, spindle speed (max.): 15,000 rpm, This IMA BIMA CUT 120/240 was manufactured in 2003. A CNC Wood Machining Centre featuring a processing range of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. It includes a main spindle with a tool holder HSK F63 and a drive power of 7.5 KW. The machine also boasts a tool change magazine with 18 places and a variety of drilling and milling capabilities. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Drive power: 7. 5 kw in s-1 mode • Spindle lubrication: one-time factory grease lubrication • Spindle cooling: water cooling • An automatic tool/adapter change magazine features a disk changer design with 18 place-coded magazine slots and moves with the support in the x-direction. • The adapter units include a saw unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock case/rung holes (max. 12,000 rpm), a vertical drilling unit s21 (6,000–9,000 rpm, max. 35 mm drill diameter), and a horizontal drilling-sawing unit (4,500–6,000 rpm, max. 125 mm grooving saw, swivel range 0 or 90 degrees). • Graphical user interface: imawop for pc computer • Bima cut editor office Lhsdpfxjx U T Hmo Ahzob • Bima cut editor import interface • Control for label printers • Label printer Technical Machine Benefits • Max. Clamping height from upper edge of suction plate z1: 100 mm • Workpiece thickness z2: 14 - 38 mm • Work table height: approx. 1000 mm • Alternating field range without pendulum machining x: 2 x 2000 mm • Free space in the middle x without pendulum processing: 200 mm • With pendulum processing x: 2 x 1500 mm • Free space in the middle x with pendulum processing: 1200 mm • Tool infeed: automatic • Pull-in force: 11000 n • Direction of rotation: programmable, clockwise/anticlockwise Extra Information Machine still under power

Condition: good (used), IMA BENZ drilling unit 10 +11 spindles with additional milling cutter and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for a different drilling gear from Homag or IMA, please contact us or have a look at the website in our store. IMA BENZ drilling unit is a versatile and powerful tool, especially for the IMA 310, 410 and 610 machines. It is a 10 + 11 spindle drilling unit with an additional milling cutter and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit no.: 4-08300 and 4-07753 Drawing no.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min-¹ Ledpsudludjfx Ahzohb Spindle speed: 8100 min-¹ and 8400 min-¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For holding milling tools The unit is used but in a functional condition and offers high productivity thanks to the ability to drill several holes simultaneously, which significantly reduces machining time.

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Lhodpfxjrhzlnj Ahzjb Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Right/left rotation, programmable 5. speed range: Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.

Condition: reconditioned (used), functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description Lhedpfx Aheudl Idszob • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging.