Used Ism 4 for sale (58,830)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth Njdpfx Afsd Tbbdjwelf - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. Nlsdpfxjd Tqals Afwjf According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard Nsdpfx Afjguk A Hjwslf - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. Nlsdpfsfdkb Uox Afwsf The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Nsdpeguk Dksfx Afwolf Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: Njdpfxofdkbhj Afwslf - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Nlsdpfx Afeguk Dvowef - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: limited functionality, Equipment: documentation/manual, Title: Demak CV4 Omni Smart FL 500.50.20.xyz CNC Dispensing & Potting Machine (2016) – Low Hours, CE Certified. Short Description: High-end, industrial CNC dispensing and potting machine manufactured by Demak (Italy). This premium unit is specialized for precise encapsulation with epoxy, polyurethane, or silicone resin. The machine is in excellent, near-new condition with very low operational hours. Fully functional, CE certified, and ready for immediate deployment in electronics (PCB potting), automotive, or LED manufacturing. Technical Specification: Manufacturer: Demak (Italy) Nedpfxezc Nnho Afwolf Model: CV4 Omni Smart FL 500.50.20.xyz CNC Year of Production: September 2016 Condition: Excellent, rarely used (very low operating hours) Working Area: 500 mm (X/Y/Z CNC controlled axes) Heating System: Equipped with 2 curing/pre-heating ovens for alternating operation (ensures non-stop, continuous production workflow) Control System: Advanced CNC control for complex potting trajectories (lines, dots, circles, 3D potting) Safety & Legal: Full CE Certification, complete original user manuals, and technical documentation included. Commercial Terms: Location: Poland (ready for inspection under power). Price: 89,000 EUR (Net, excluding VAT). Transaction: 0% VAT for EU companies with a valid VAT-ID (Intra-Community Supply). Delivery Terms: EXW (Ex Works) – Assistance with loading onto a truck can be provided.

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. Nlsdpfx Afjig T Epowef 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Nsdpfsl Dw Nxjx Afwolf

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Nodpfx Aetp I S Aofwslf

Condition: used, functionality: fully functional, mileage: 629,000 km, first registration: 10/2011, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 26,000 kg, tire condition: 70 %, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,310 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, power mirror, trailer coupling, truck registration, Mercedes Benz Actros 2541 Njdsyfg Rrjpfx Afwslf Roll-off tipper PRISMAG SA26L 6x2 Front leaf suspension - rear air suspension Differential lock Automatic transmission GVW 26,000 kg – payload 14,300 kg Trailer coupling (permissible gross combination weight 44,000 kg) Euro 5 Total vehicle length: 8.31 m Wheelbase: 4.20 m ABS 3rd axle steerable and height-adjustable Tyres 70% 500L tank Fog lights Sun visor Central locking Air conditioning Air-suspended driver’s seat Electric windows and exterior mirrors All information provided without guarantee / errors and omissions excepted.

Condition: good (used), mileage: 697,316 km, power: 300 kW (407.89 HP), first registration: 05/2007, fuel type: diesel, number of seats: 51, gearing type: mechanical, axle configuration: 2 axles, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, central locking, cruise control, onboard kitchen, parking heater, trailer coupling, Mercedes-Benz Tourismo 15 RHD, first registered: 09.05.2007, Mercedes engine 408 HP Euro 4, 697,316 km, 6-speed manual gearbox, 48+2+1 sleeping seats with seat belts, air conditioning, WC, DVD+TV, retarder, cruise control, ABS, ASR, radio, reading lamps, microphone, lifting and lowering system, luggage rack, folding tables, luggage nets, footrests, curtains, kitchen, refrigerator, jet ventilation, auxiliary heating, 2x roof hatches, double glazing, central locking, Grammer driver's seat with 3-point seat belt, electric sunblind, electric driver's window, tow bar, ski holder fittings. Nlodpoynktvsfx Afwof

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Njdpfovu Hrkox Afwelf Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Nledpfevvcqxex Afwof Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm Nlodpfjy Rp D Tjx Afwof - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Njdjy Dg N Tepfx Afwolf Contact us for more details or to arrange a viewing.

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER Nljdpoxwnw Aefx Afwsf ALL ARE NEW , OUT OF THEIR BOXES.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Nljdpfx Afsyddqmewjf Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: KK/126675, functionality: fully functional, cutting height (max.): 100 mm, saw blade diameter: 315 mm, saw blade bore: 30 mm, overall weight: 250 kg, intake manifold diameter: 120 mm, TECHNICAL DETAILS Maximum cutting height: 100 mm Cutting height at 45°: 70 mm Minimum saw blade diameter: 250 mm Maximum saw blade diameter: 315 mm Saw blade bore: 30 mm Saw unit tiltable: 45° to 90° Table and guides Roller table length: 840 mm Table width: 560 mm Parallel guide adjustment: 1,300 mm Dust extraction Dust extraction port diameter: 120 mm MACHINE DETAILS Electrical data Voltage: 400 V Current consumption: 10 A Fuse rating: 16 A Njdpfxszuwuxs Afwslf Main motor power: 3.0 kW Dimensions & weight Dimensions (L x W x H): 2,100 x 900 x 1,050 mm Machine weight: 250 kg Transport packages: 1 piece EQUIPMENT CE marking Note: The shaft and saw blade for the scoring unit are present, but the drive motor for the scoring unit is missing.

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, Universal Gamma-S4D 4-lane liquid sachet machine (2015) Nodpfx Afozbc Niewelf 20g-75g, 40 cycles per minute, up to 160 sachets per minute Advised refurbished 2022 With ICE Zodiac Hawk printer control and 2 ICE Zodiac Eagle print heads

Condition: used, Year of construction: 1990, 1990 Innse 4 Aries CF-S-WZ 150 CNC Horizontal Multi Pallet Milling Machine with Siemens Sinumerik 880M Control Nodpfx Afozvp I Tswslf Maximum Table Load 100 Ton. Maximum Spindle Speed 2,500rpm (60kW Motor). Axis Travel 'X'=11,800mm, 'Y'=3,500mm, 'Z'=800mm, 'W'=1,150mm. Spindle Taper ISO 50. 300 Position ATC. S/N: 1858. With Angle Heads & Coolant System. Note: Machine Has Problems With The Head & Electronics.

Condition: good (used), mileage: 526,627 km, power: 368 kW (500.34 HP), first registration: 06/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,530 mm, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - CarPlay - Digital tachograph - Driver's card/tachograph (recording device) - Highline - LED lamp - Alloy wheels - Manual - Auxiliary drive - Radio/cassette - Slider - Lane departure warning system - Fabric - Additional braking system = Notes = Configuration: 6x2, Total tank capacity: 540 liters, Height of fifth wheel coupling: 120 cm, Fifth wheel coupling: Slider, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Type of cab: Highline, Cruise control, Driver's card/tachograph (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Color: Red, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, Auxiliary drive, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 6x2/4 Retarder Spring Air 1 BED ADR = Additional Information = Transmission Gearbox: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Nlodpfx Aozwur Hofwsf Leasing price: €1,101 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 451,695 km, power: 368 kW (500.34 HP), first registration: 06/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,560 mm, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - CarPlay - Digital tachograph - Trip recorder (control unit) - Highline - LED lamp - Alloy wheels - Manual - Auxiliary drive - Radio/cassette - Slider - Lane departure warning system - Fabric - Additional braking system Nodpezwurtjfx Afwslf = Notes = Configuration: 6x2, total tank capacity: 540 liters, height of the fifth wheel coupling: 122 cm, fifth wheel coupling: slider, number of locks: 1, alloy wheels, suspension type: air suspension, type of cab: Highline, cruise control, trip recorder (control unit), digital tachograph, air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, CarPlay, GPS navigation, color: red, heated mirrors, type of lighting: LED lamp, lane departure warning system, climate control, seat heating, Bluetooth, engine power: 368 kW (493 hp), fuel: diesel, Euro: 6, transmission type: Opti-cruise, transmission type: Scania, gears: 12, additional braking system, retarder brand: Scania, power steering, ABS, ASR, auxiliary drive, central locking, seat configuration: 1+1, seat cover: fabric, seat adjustment: manual, 6x2/4 Retarder Spring Air 1 BED ADR = Further Information = Transmission Transmission: SCA, 12 gears, automatic Axle Configuration Brakes: disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: leaf spring suspension Axle 2: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 8 mm; Suspension: air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inside: 4 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 6 mm; Tire tread depth right outside: 5 mm; Suspension: air suspension Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: €1,101 per month (default, 60 months); Inquire for more information and terms. Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), mileage: 653,447 km, power: 368 kW (500.34 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,760 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,700 mm, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed - LED lamp - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Blind spot sensor - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 11460 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 550 liters, Chassis height: 98 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 2 tons, Alloy wheels, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, CR 19, durabright, 6x2*4 Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 3 mm; Suspension: Air suspension Weights Tare weight: 11,460 kg Payload: 15,540 kg GVW: 27,000 kg Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €953 per month (default, 60 months); Inquire for more information and terms. Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Nledpfjzwlguex Afwef Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty...