Used Ism 4 for sale (58,165)

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Working dimensions 900 w. x 1300 h. x 900 d. External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request Iodpfsb Al Sbex Abvstd

Condition: used, mileage: 560,743 km, power: 315 kW (428.28 HP), first registration: 08/2014, fuel type: diesel, number of seats: 51, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++Original-KM+++ +++Voltage transformer+++ +++Sockets on all seats+++ Engine: Mercedes-Benz Emission class: Euro 6 Gearbox: Automatic Seats: 49+1+1 sleeper seats with 3-point seat belts _____ Safety and security * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Front fog lights * Immobilizer * LED lights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Refrigerator * Center WC * Head leather inserts * Driver's microphone Exterior * Lifting / lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Central locking * Roof hatches, fans, roof ventilator Audio [&] Communication * Navigation system * Radio, CD * USB connection * Video, DVD Miscellaneous * Vehicle dimensions: Length 12.29 m, width 2.55 m, height 3.77 m * Hubcaps * Twin tires * Tires: VA 80%, HA 80%. Itsdpfx Abjxq Iuusvsd Our internal vehicle number: 11180. Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: used, mileage: 698,659 km, power: 300 kW (407.89 HP), first registration: 09/2002, fuel type: diesel, number of seats: 40, gearing type: mechanical, emission class: euro3, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Original KM+++ Engine: Mercedes-Benz Emission class: Euro 3 Gearbox: 6-speed manual Seats: 37+1+2 sleeping seats with lap belts _____ Iodpfx Aor Nn R Tsbvjtd Safety * Retarder * Cruise control * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Leather head inserts * Tour guide microphone * Driver microphone Exterior * Raising / lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Central locking * Central locking * Roof hatches Audio & communication * Navigation system * Radio / cassette / CD Other * German vehicle registration document * Vehicle dimensions: length 10.10 m, width 2.55 m, height 3.75 m * Hubcaps * Twin tires * Tires VA 40% - HA 40% * Our internal vehicle number: 10624 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm Ijdpfx Aox Nc Atjbvotd High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: used, mileage: 707,318 km, power: 250 kW (339.91 HP), first registration: 08/1999, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro2, color: yellow, brakes: retarder, Equipment: ABS, parking heater, Engine: Mercedes-Benz Euro 2 Mileage according to speedometer Gearbox: 5-speed automatic Seats: 45+1 high/fixed with lap belts Standing places: 29 Safety Retarder Itsdpsrmltpjfx Abvjd * Cruise control * ABS, ASR * Fog lights Passenger compartment Auxiliary heating * Jet ventilation * Reading lights * Double glazing * Stroller space * Wheelchair space Exterior Trailer hitch * Double-width door * Raising/lowering system * Power steering * Tachograph with window * Sun visor * Electric outside mirrors * Roof hatches, fans, roof vents Audio [&] communication Radio, cassette Other German vehicle registration document * Hubcaps * Twin tires * Vehicle dimensions: Length 11.25m, width 2.50m, height 3.26m * Tires: Front axle 40%, rear axle 140% * Our internal vehicle number: 9960 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: refurbished (used), functionality: fully functional, Used modernized 3D CNC coordinate measuring machine. The machine is fully modernized with REVO2, the new high-tech touch probe system from Renishaw, new controller, temperature compensation, new computer system with i7 processor, Windows 11 Pro operating system, and the latest version of the 3D software RationalDMIS V2025. Technical data: Measuring range: X = 1200 mm - Y = 2400 mm - Z = 1000 mm Measurement uncertainty: MPEE: 2.7+L/300 Itsdpfx Aowptiwjbvod MPEP: 1.8 in compliance with the environmental conditions specified by the manufacturer Machine weight: approx. 7,250 kg Permissible tool weight: 2,500 kg External dimensions of the measuring machine: Length: 3540 mm - Width: 2050 mm - Height: 3770 mm (minimum room height 3870 mm) Clearance around the machine 600mm on each side. The machine is ready for demonstration in our facilities. We would be happy to arrange an appointment for your visit to our premises so that we can demonstrate the system's performance to you.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Iodpfsd Tbbdex Abvetd - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm Itodsfdkb Tjpfx Abvod - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Itsdpfxed Tqals Abved - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Iodofdkb Ujpfx Abvstd The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Iodpfx Abeguk Dkjvotd The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Itsdpfefdkbhjx Abvod We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Iedpfx Absguk Dvsvstd - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train Itedpfxewgym Do Abvod - Power: 110-1250 kW - Year of manufacture: 2011 - Design: ZM

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm Itodpjig T Epjfx Abvjd a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Itedpfx Ael Dw Nxjbvsd long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Isdpfx Abscw Dg Dovotd Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: used, Year of construction: 2019, Used Capsuling Machine Nortan Prisma 2019 Itodpovgvyhjfx Abved The Nortan Prisma 40 capper of 2019 is a cutting-edge machine, designed to guarantee high performance and reliability. With a voltage of 400 volts and an absorption of 2 kW, a frequency of 50 hertz and a mass of 1400 kg, this capper is perfect for working with an air pressure of 6 bar. The machine is anti-clockwise and has a maximum speed of 2000 pieces per hour on both types of capsules, shrink and snare polylaminate. The operator panel, positioned on the upper left part, is analog and includes a small PLC. The control key and the start and stop are manual. This Nortan Prisma 40 capper is like new and immediately available in stock, after a short pre-maintenance to check that everything is perfect. If you are looking for a reliable and performing capper, this Nortan Prisma 40 from 2019 is the right choice for you.

Condition: used, Year of construction: 2013, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Iodpfevguvzjx Abvjtd Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Itsdpfx Aov Ukz Ajbved Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Production: alloyed Tip: 4 sec Itsdpfouhn Dcsx Abved Turntable

Condition: good (used), Manufacture: ALLOYD Itodpfsuhn Diox Abved Tip: 4 seec Turntable

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Iedpfx Absp U Umkjvetd

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Iedeyddqmepfx Abvjtd Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, machine/vehicle number: 0711ST0619, functionality: fully functional, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Iodoyddmnspfx Abvjtd Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors