Used Line Reactor for sale (15,786)

Year of construction: 1988, condition: used, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t Bwsdpsryaqysfx Aacsw dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Bjdpfxexpxhve Aacsww Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), mileage: 401,306 km, power: 390 kW (530.25 HP), first registration: 05/2019, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, retarder, = Additional Options and Equipment = - (Roof) spoiler - Aluminum fuel tank - Climate control - Television Bwodpfx Aajxcvv Decjw - Front protection bar - Low noise - Tipping hydraulics - Alloy wheels - Sleeper berth - Air horn - Radio/CD player - Side stripe - Electrically adjustable side mirrors - Transmitter devices - Sun visor - Digital tachograph - Spotlight = Further Information = General Information Cab type: standard/single Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,410 kg Axle Configuration Brakes: disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8,000 kg; Steered; Left tire tread: 70%; Right tire tread: 70%; Suspension: leaf spring Rear axle: Tire size: 315/80 R22.5; Max. axle load: 13,000 kg; Left tire tread: 60%; Right tire tread: 60%; Suspension: air suspension Maintenance APK (Roadworthiness certificate): inspected until 06/2026 Condition Technical condition: very good Visual condition: very good Damages: none

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Bedpfxoxqzmwe Aacjww

Year of construction: 2011, condition: ready for operation (used), This profile bending machine was manufactured in 2011. It features an automatic transport system for semi-finished LVT panels, with processing capabilities ranging from 500 mm to 2000 mm in length and 140 mm to 600 mm in width. The system includes longitudinal and cross machines, each equipped with 6 milling motors, ensuring precise profiling. If you are looking to get high-quality profiling capabilities, consider the HOMAG PROFI FPL 525/6/04/PW/V LVT machine we have for sale. Contact us for further details. Application Types Bwedpfxoxuld Ij Aacjw Complete Production

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 300 584, overall weight: 8,000 kg, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), input current: 85 A, year of last overhaul: 2016, We are selling a complete shredding line with: - loading conveyor - Artech RS75 shredder - pusher / compactor - conveyor - electrical cabinet Bwedpfx Ajxrtwwoacjw - overband magnet - sampler

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13 Bwedpfx Asxmvm Roacew

Year of construction: 2000, condition: used, number of controlled axis x workpiece weight x kg throat x mm Bwodsl Ebx Dspfx Aacsw total power requirement x kW weight of the machine ca. x t dimensions of the machine ca. x m +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, mileage: 162,800 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2023, next inspection (TÜV): 01/2026, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Equipment: * Highline package * R Line exterior package * Digital cockpit * Front and rear parking sensors * Ambient lighting * 3-zone climate control (Climatronic) * LED headlights with automatic range adjustment * DSG transmission * Front camera / multifunction camera * Audio navigation system * 17" alloy wheels * Chrome package 2 Bwsdpswx Twmofx Aacjw * Electric windows * Heated seats front and rear * Multifunction leather steering wheel with paddle shifters * Driver fatigue detection system * Multi-collision brake * Trailer stabilization program * Adaptive cruise control * Lane keeping assist * Lane change assist * Surround monitoring system * Front assist system * DAB+ radio * Fabric upholstery / Microfibre ArtVelours * Rain sensor * Electrically adjustable, heated exterior mirrors * Luggage management package * Glove compartment with cooling function * Keyless start * Multimedia interface * Mirror package * 1 owner * Complete service history at VW, last service at 138,247 km on 02.01.2025 * The vehicle has various cosmetic defects (see photos; no guarantee of completeness) which have been accounted for in the offer price. Vehicle number: 96 Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE INSPECTION / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE FOR AN ADDITIONAL CHARGE Delivery service upon request Foreign customers have the option to make a down payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT claimable). We are happy to take care of your vehicle registration (Düsseldorf), as well as arranging customs/export or transit license plates (5-day). Complete export processing available (export declaration) Vehicles with TÜV used car appraisal available. On request, we are pleased to offer you our GPG used car warranty with individual solutions tailored to you and your vehicle. Part exchange possible. For further questions, we are happy to assist you by telephone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to change, errors, and prior sale. Offers are non-binding. All details without guarantee. Vehicle descriptions do not constitute warranted characteristics.

Condition: used, Year of construction: 2002, Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Terboven/ISTE 2002 Pos. 6 Hygienic center: Ecolab/Lang 2002, CAF, no PLC Pos. 7/8 Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L Pos. 9 CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Pos. 10 Cleanroom: Weiss 2002, ventilation/overpressure Pos. 11 Preform hopper: Dieterle 2002, MD3 Pos. 12 Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Pos. 13 Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Pos. 14 Air conveyor: Krones 2002, automatic rail adjustment Pos. 15 Cap conveyor: Gassner 2002, 2 container positions, cap elevator Pos. 16–18 Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated Pos. 19 Label check: Krones 2002, incl. in Prontomodul Pos. 20 Bottle check: Krones 2002 Pos. 21 Conveyor: Krones 2002, air blower before labeling Pos. 22 Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h Pos. 23 Canmatic module: Krones 2007, paper labels Pos. 24 Contriroll module: Krones 2007, film roll Pos. 25 MHD coding: Videojet Excel/170i Pos. 26 Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport Pos. 27 Packaging conveyor: Krones 2002 Pos. 28 Handle applicator: Twinpack MHTE 2002 Pos. 29 Empty pallet magazine: Krones LPM 2002 Pos. 30 Palletizing: Krones robot 3A loader 2002, 4,000 packages/h Pos. 31 Pallet conveyor: Krones 2002, transfer cart & turner Pos. 32 Empty pallet magazine: Krones LPM 2002 Pos. 33/34 Pallet stretch wrappers: Franpak 2002, top sheet applicator Pos. 35 Tying machine: Bornbinder HB 2002 Pos. 36 Pallet coding: Logopak EAN 128 2003 Bedpfx Aexqqpusacoww

Condition: used, Year of construction: 2010, Koenig Combi line KCL/7 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened Konig Rex Basic headmachine 3, 4 or 5 rows SK 67 weight range 55-120 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h König Combi Line CL600+WDK+RR+AB consisting of: pre-long rolling station R600 Siemens digital control panel pre-prover VG190/230 stamping device with 2 stamps: Kaiser stamped Bwsdpfexr Ichex Aacjw forming station R600 setting unit AS600 year of build 2010 pictures BEFORE reconditioning

Condition: used, tank capacity: 4,870 l, GENERAL Design: suspended Remarks: Bottoms extend beyond frame ends; type plates not present; 1 tank with dent in the double jacket; heating connections cut off External diameter: 1,900 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 4,300 mm Heating/cooling: present Power: 15 kW Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.50 bar Agitator: propeller Number of agitators: 1 agitator Support type: frame Location: Bremen Technical documentation: drawing, TÜV papers Cylinder temperature control: double jacket Vacuum: 1.00 bar Volume: 4,870 liters Double jacket volume: 530.0 liters Cylinder wall thickness: 8 mm Bsdpfx Aaoxqba Rjcsww Double jacket material: steel Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,420 mm Last application: chemical industry TANK Max. operating temperature (tank) / °C: 130 °C HEATING/COOLING JACKET Base temperature control: double jacket EQUIPMENT Manhole/dome: in the top (DN 500) Discharge (alternative input): 120 mm Note: Handhole cover missing AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 volts Agitator mounting: eccentric in top Agitator configuration: Only motor/gearbox units and 1 agitator shaft without propeller available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Bedpsxqbaqofx Aacoww Design: suspended Remarks: Several connections were modified by the previous operator (not documented in TÜV papers); vessel is mounted on 3 lugs made of Fe (not 4 as shown in the drawing); heating coil in the cylinder only in the lower area; insulation jacket with sheet metal cutouts and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. permissible operating temperature: 165 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: beam agitator Support type: lugs Location: Bremen Technical documentation: drawing, TÜV papers Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 liters Double jacket volume: 34.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Previous application: ethanol VESSEL Max. operating temperature vessel / °C: 165 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminum EQUIPMENT Manhole / dome: in top head (DN 600) Outlet: flange DN65 Note: minor residues present AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Strain reliever: Agitator arrangement: central, in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Top head wall thickness: 8.0 mm

Condition: used, tank capacity: 1,860 l, GENERAL INFORMATION Design: suspended Remarks: 2 support feet made of V2A (contact surface reversed; see photos); outlet with flanged reduction Speed: 177 rpm Internal diameter: 990 mm Total length: 3,700 mm Heating/cooling: available Power: 1.1 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Bwodpfx Ajxqa Tcsacjw Mounting type: support feet Location: Bremen Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,860 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Bottom tempering: half-pipe coil FEATURES Outlet: Flange DN80 Note: slight residues MATERIAL SPECIFICATION Heat exchange system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in the top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.9 mm Top wall thickness: 4.0 mm

Condition: used, tank capacity: 1,969 l, GENERAL INFORMATION Design: Suspended Remarks: 2 lugs made of V2A stainless steel (support surface reversed; see photos) Speed: 571 rpm Internal diameter: 1,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. excess pressure: 3.2 bar Top cover: bolted lid Mechanical seal: Mechanical seal without thermosiphon vessel Agitator type: Propeller Support type: Lugs Location: Bremen Technical documentation: Drawing available Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 2,110 mm Previous application: Pharmaceutical chemicals VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Bodpfxoxqa Slo Aacjww Bottom temperature control: Half-pipe coil EQUIPMENT Outlet: Flange DN80 Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in top cover Agitator equipment: Technical documentation for agitator available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm

Condition: used, tank capacity: 7,385 l, GENERAL Equipment: Crane lugs Design: Suspended Notes: Manhole DN 350/450; additional technical documentation available External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 4,950 mm Heating/cooling: available Power: 3.07 - 11.2 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: Blade agitator Mounting type: Ring Location: Bremen Technical documentation: Drawing Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 7,385 liters Double jacket volume: 735.0 liters Double jacket material: Steel Product-contact material: Enamel Condition: used Last application: Pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / tube space / bar: 1.0 bar Bottom temperature control: Double jacket EQUIPMENT Manhole / cover: in upper head Outlet: available Outlet (alternative entry): 150 mm MATERIAL SPECIFICATION Heads material: Steel Cylinder material: Steel Bodexqa Rhjpfx Aacjww AGITATOR Voltage: 380 V Agitator position: Centrally located in upper head Agitator equipment: Agitator shaft and blades made of stainless steel

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Support ring made of Fe; sheet metal cutouts in the insulation jacket; original manhole cover is no longer available (a similar manhole cover is included, see photos); at one connection, the enamel layer is slightly chipped in places (see photos) External diameter: 2,310 mm Internal diameter: 2,000 mm Ex-protection: Motor is ex-protected (compliance with current ATEX directives under site-specific conditions must be verified) Total height: 5,250 mm Heating/Cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: anchor agitator Support design: ring Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: double jacket Bedpfx Aoxqa Rboacsww Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Double jacket material: steel Product-contacting material: enamel Condition: used Cylindrical height: 2,100 mm Previous use: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible negative pressure double jacket / tube space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket material: aluminum EQUIPMENT Manhole / dome: on top head (DN 500) Outlet (alternative entry): 150 mm MATERIAL SPECIFICATION Head material: steel Cylindrical shell material: steel AGITATOR Voltage: 400 Volt Agitator arrangement: centered in top head

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel Bwedjxqa Nwjpfx Aacew AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Condition: used, tank capacity: 3,690 l, GENERAL Equipment: Crane lugs Design: suspended Notes: Manhole cover incomplete (e.g., sight glass missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Internal diameter: 1,600 mm Explosion protection: Motor is ATEX-protected (compliance with applicable ATEX regulations under local conditions must be checked) Overall height: 4,350 mm Heating/Cooling: available Power: 11 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Seal: Mechanical seal with thermosiphon vessel Agitator: anchor agitator Support type: ring Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 liters Jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry TANK Max. tank operating temperature / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum, jacket/pipe space / bar: 1.0 bar Bottom plate temperature control: half-pipe coil EQUIPMENT Manhole / dome: in the top (DN 500) Outlet (Alternative entry): 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400 volts Agitator positioning: centrally in the top Agitator features: Bwodpfjxqayijx Aacew The agitator drive was controlled by an external speed controller at previous operator (no longer available); various technical documents for the agitator available TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 6.5 mm Top plate wall thickness: 7.9 mm

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,400 mm Heating/cooling: available Power: 2.2 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Bsdsxqaycspfx Aaceww Max. overpressure: 3.2 bar Top head: top head removable / hinged Mechanical seal: mechanical seal with thermosiphon vessel Agitator: beam agitator Support form: ring Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Cylinder temperature control: half-pipe coil Type plate: Vacuum: 1.0 bar Volume: 2,420 liters Double jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,180 mm Last application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible vacuum double jacket / tube space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400 Volt Interference suppressor: Agitator arrangement: centered in top head Agitator equipment: beam and propeller agitator elements mounted on shaft; speed was controlled at previous operator by external speed controller (no longer available); various technical documents available for the agitator TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top head wall thickness: 7 mm

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspended Remarks: Support ring made of Fe; manhole cover incomplete; on one tank, most of the heating connections have been cut off and are supplied loose; 1 tank is approx. 100 mm lower overall due to different motor/gear units Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: present Power: 3 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base type: ring Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 liters Double jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous use: pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200 °C HEATING/COOLING JACKET Max. permissible negative pressure double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole/Dome: on top head (DN 500) Outlet (alternative input): 130 mm MATERIAL QUALITY Material tempering system: V2A 1.4301 (AISI304) AGITATOR Agitator manufacturer: Ekato Voltage: 400 volts Agitator arrangement: centrally mounted in the top head Agitator configuration: Slight variations in the agitator designs (Interprop beam agitator installed on the shaft for media up to approx. 3000 mPas; in one tank an additional stabilizing propeller is also mounted on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, this speed range is 25 - 126 rpm); partial technical documents for the agitators available TECHNICAL DATA / DIMENSIONS Bsdpfxsxqax Eo Aacsww Bottom wall thickness: 6.1 mm Top wall thickness: 7.9 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Sight glasses in the manhole covers are missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,750 mm Heating/cooling: available Power: 6.8 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: paddle agitator Bodpfx Aexqaxxoaceww Support type: ring Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemistry VESSEL Max. operating temperature vessel: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum jacket / pipe space: 1.0 bar Temperature control, bottom: half-pipe coil EQUIPMENT Manhole/dome: in top head (DN 500) Outlet (alternative option): 130 mm MATERIAL Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 V Interference suppressor: Agitator arrangement: center-mounted in the top head Agitator equipment: technical documentation for agitator available; Interprop paddle and inclined blade agitator installed on the shaft; drive adjustable by handwheel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Top head wall thickness: 9.1 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Further technical documentation available; Sight glass on the manhole cover is missing; Support ring made of Fe; Flanges partially made of Fe Speed: 6 - 40 rpm Internal diameter: 1,600 mm Ex-protected: Motor is ex-protected (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 4,250 mm Heating/Cooling: available Power: 3.5 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base design: ring Location: Bremen Technical documentation: Drawing, inspection certificate Jacket heating: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Jacket volume: 202.0 liters Wall thickness cylinder: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum (double jacket / tube compartment) / bar: 1.0 bar Bottom heating: Half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) MATERIAL QUALITY Material heating/cooling system: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 Volt Agitator arrangement: centrally in top head Agitator features: Output speed adjustable via handwheel Bwjdpfexqaxrjx Aacsw TECHNICAL DATA / DIMENSIONS Wall thickness bottom: 6.5 mm Wall thickness top: 9.1 mm

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Bedoxqavdspfx Aacoww Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable/openable top cover Agitator: Paddle agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Bwjdpfxsxqau Te Aacow Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm