Used Line Reactor for sale (9,733)

Condition: used, Automated Fishing Bait Boilie Line with Stainless Steel Eurobin Lifter for adding Dough into the Extruder, Steel Safety Caging and Safety Interlock Platform, (2) x Eurobins allow filling in Batches, Kilia Extruder capable of large outputs, features additional Guarding on the top of the Extruder to ensure safety with use of the Eurobin Lifter. Extruder Serviced Bait Tools Rolling Machine, which forms Dough Balls in sizes between 12 and 24mm (additional options of sizes available from Manufacturer) built in Cut-off for Waste Dough to be re-used and reduce need for Manual Monitoring, Dual Direction PVC Infeed Belt ensure less marking of product in Soft Dough Stage products then move to the Boiler Unit. This has Variable Speed Belt and PLC Connection to Gas System for Timing and Temperature Regulation. All automated and capable of maintaining High Infeed Dough Quantity, Post Cook Outfeed Perforated Belt with 6 Fans Array for increased drying of product, Belt can be varied in speed to suit requirement, Belt terminates into Cassette Tray Filler. Fills to required weights of 9kg (this is variable) further Array of Fans below Tray Drying Line to further dry the products. Machine capable at highest rate 600kg per hour of Finished Products, Waste Quantity when set up correctly yields less than 0.5%. Blsdpfjyil Easx Aa Nsd Location: These lots are located in Burnham-on-Crouch, Essex, UK.

Condition: used, mileage: 46,489 km, power: 96 kW (130.52 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1156. PS32253 ----EQUIPMENT - Passenger airbag - Fixed tow bar - Tow bar electrical prep kit - 256° double rear doors, without windows - Rear ladder and roof rack - LED load compartment lighting - Wooden load floor - Smoker package - Technology package 6P - SVO: Express Line package - Side wall panelling up to the roof - WÜRTH shelving system - Central locking with remote control - Transmission: 6-speed manual - ABS, EBD and DRIVER ASSISTANCE - Driver airbag - Exterior mirrors, electrically adjustable and heated - Battery: Extended battery life - On-board computer Bjdpfsyn Udlox Aa Nsld - High roof - Double rear doors/180° (without windows) - Tachometer - Third brake light - Electric front windows - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delay function - Automatic climate control - 70-litre fuel tank - Paintwork: solid paint - Load compartment lighting - Emergency assist - Technology package 2 - Particle filter: diesel particulate filter - Radio: 12" multifunction display & Ford SYNC 4 - Tyre pressure monitoring system - Rain-sensing wipers - Sliding door: right-hand side - Rear mud flaps - Side protection strips - Power steering - Seat belts - Seats: Seat package 18A - Start-stop system - Partition (plastic) at B-pillar height - Rear step - Air recirculation control - Lashing eyes - Immobiliser - Heat-insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment, front ... and much more. ----The vehicle is in an unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also available with no deposit! Do you have further questions? We are happy to advise you!

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector Blsdpfjx Ari Hsx Aa Ned 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: used, Year of construction: 2004, Urban Corner Cleaner type SV 530 Blodpfx Aoylitvea Nsd

Condition: excellent (used), EWAG EWAMATIC LINE is a CNC tool and cutter grinder offering precision, high accuracy and reliability. 6 axes (X360×Y240×Z240 mm; B ±135°). 6 spindles, 7.5 kW spindle, 16 kVA, feeds 10 m/min, 3x400 V 50Hz, air 6 bar; weight ~4000 kg; 3400×2200×2500 mm. Equipment: Tool setter Renishaw, redressing device, oil mist extractor, loading robot Fanuc LR Mate 200iC, fire extinguishing system. Achieves tight tolerances; suited to automotive, aerospace, medical and watchmaking. Bsdpfx Aoypbflja Neld

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal - Includes existing Leitz planing and beading tools - Linked to a Maweg Saturn Duo single-slice wood sander, year of manufacture 1985 and a workpiece return conveyor Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom drilling units - Rebating carriage for small sashes - Workpiece return - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Bsdpjyclwxefx Aa Nold Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window...

Condition: used, mileage: 162,800 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2023, next inspection (TÜV): 01/2026, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Equipment: * Highline package * R Line exterior package * Digital cockpit * Front and rear parking sensors * Ambient lighting * 3-zone climate control (Climatronic) * LED headlights with automatic range adjustment * DSG transmission * Front camera / multifunction camera * Audio navigation system * 17" alloy wheels * Chrome package 2 * Electric windows * Heated seats front and rear * Multifunction leather steering wheel with paddle shifters * Driver fatigue detection system * Multi-collision brake * Trailer stabilization program * Adaptive cruise control * Lane keeping assist Bodjwx Twmjpfx Aa Njld * Lane change assist * Surround monitoring system * Front assist system * DAB+ radio * Fabric upholstery / Microfibre ArtVelours * Rain sensor * Electrically adjustable, heated exterior mirrors * Luggage management package * Glove compartment with cooling function * Keyless start * Multimedia interface * Mirror package * 1 owner * Complete service history at VW, last service at 138,247 km on 02.01.2025 * The vehicle has various cosmetic defects (see photos; no guarantee of completeness) which have been accounted for in the offer price. Vehicle number: 96 Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE INSPECTION / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE FOR AN ADDITIONAL CHARGE Delivery service upon request Foreign customers have the option to make a down payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT claimable). We are happy to take care of your vehicle registration (Düsseldorf), as well as arranging customs/export or transit license plates (5-day). Complete export processing available (export declaration) Vehicles with TÜV used car appraisal available. On request, we are pleased to offer you our GPG used car warranty with individual solutions tailored to you and your vehicle. Part exchange possible. For further questions, we are happy to assist you by telephone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to change, errors, and prior sale. Offers are non-binding. All details without guarantee. Vehicle descriptions do not constitute warranted characteristics.

Condition: used, mileage: 96,327 km, power: 160 kW (217.54 HP), first registration: 08/2022, fuel type: hybrid, next inspection (TÜV): 10/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * AMG LINE * AMG Sport Package * AMG Styling front spoiler and side skirts * AMG 18" alloy wheels * LED Multibeam headlights * Digital instrument cluster * Alcantara / partial leather seats * PDC front and rear with reversing camera * Navigation system * Automatic climate control * 8-speed automatic transmission * DAB radio * Traffic sign recognition * Lane keeping assist * Supersport leather steering wheel with multifunction and shift paddles * Sound system * Ambient lighting * Cruise control * Heated seats * Rain sensor * Light sensor * Smartphone integration package CarPlay and Android Auto * Automatic high beam assist * Seat comfort package * Multimedia system MBUX (digital multimedia system) * Active parking assist * Comfort suspension * Mirror package * Electrically adjustable, heated, and folding exterior mirrors * Light and visibility package * Decorative trim in carbon optic * Drive mode selector "AGILITY SELECT" * EURO 6d * 4x electric windows * Tinted windows * On-board computer * Center armrest with storage compartment * USB and AUX-IN connection * Fog lights * ESP * Child safety seat system "ISOFIX" Blsdpfsxitg Hex Aa Nsd * Folding rear bench seat with through-loading feature * ILS "Intelligent Light System" * 10.25" instrument display * Hybrid 160 kW (engine 1.3 liter - 118 kW) * AC charging function with 3.7 kW charging power * Charging cable SCHUKO CEE 7/7 (TYPE E/F) 8M * Charging cable MODE3 (TYPE 2, 3x16A, 11KW) 4M * Business package * Infotainment package High-End * Smartphone integrated * Keyless-Go * Remote central locking * 1st owner * Full service history * Last oil service at 96,315 km on 01.10.2025 Vehicle number: 131 WhatsApp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE SALES CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AT EXTRA COST Delivery service on request Foreign customers have the option to pay a deposit and pick up the vehicle at a later date. NET EXPORT possible (for vehicles with deductable VAT). --- We are happy to handle your vehicle registration (Düsseldorf) as well as create customs/export license plates or 5-day temporary plates. Complete export processing possible (export declaration). ---Vehicles with TÜV used car inspection report available. ---Upon request, we are happy to offer our GPG used car warranty with customized solutions specifically for you and your vehicle. ---Trade-ins welcome. ---If you have any further questions, please feel free to contact us by phone. Business hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 ---Subject to change, misprints, errors, and prior sale. Offers are non-binding. All information provided without guarantee. Vehicle descriptions are expressly not warranted features.

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Blsdpoyigigefx Aa Nsd

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Bodpfxjyighis Aa Neld

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Bedpfsif Sg Sox Aa Nold Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Blsdohx R Etspfx Aa Njd Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Bodpfxskucxlo Aa Nold Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Bjdpfx Aaod D Dh Aj Nold Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Bedpferq Eawex Aa Nsld

Condition: used, functionality: fully functional, Hydraulic bar steel shear with punch Blodpfswtqmnsx Aa Nsd Manufacturer: Epple Model: E-HPS 65 E-Line Technical specifications Manufacturer Epple Model E-HPS 65 E-Line Stations 5 Punching force 65 t Max. punching capacity Ø 26 x 20 mm Stroke 55 mm Working radius 305 mm Working height 1,030 mm Motor 5.5 kW Dimensions (LxWxH) 1.7 x 0.95 x 1.90 m Weight 1.6 t Equipment - Electric contact stop All details without guarantee. A demonstration is available at any time in our exhibition hall.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 2200 kg Bjdpfsvz E Tgsx Aa Neld Total power requirement 44 kw

Condition: good (used), Year of construction: 2012, functionality: fully functional, overall weight: 7,300 kg, total height: 1,750 mm, total length: 10,000 mm, total width: 3,750 mm, working width: 3,800 mm, For sale: Vertongen Penpro Control window production line Year of manufacture: 2012 Condition: Good, working condition Complete industrial solution for the production of windows and exterior joinery with high precision and efficiency. 🔹 Description The Vertongen Penpro Control is engineered for flexible production of window frames without setup time. Thanks to the unique combination of tool spindles, various profiles and dowel joints can be produced in different wood thicknesses and widths. It offers stable and highly accurate positioning of the workpieces. After machining, components automatically return to their starting position, resulting in high repeatability and consistent dimensions—ideal for serial production. The central working position allows operation by a single operator, ensuring an efficient workflow and reduced labor costs. 🔹 Applications - Tenoning - Profiling - Window and exterior joinery - Sliding windows & French doors - Angled windows - Solid cabinet doors Blodpfx Aasyky Die Ned - Series production with high precision 🔹 Technical specifications - Brand: Vertongen - Model: Penpro Control - Year of manufacture: 2012 - Industrial, robust design - Suitable for 68 mm and 90 mm profiles - Can be operated by one person - High repeatability

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Bedpsx U Ay Njfx Aa Neld Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Make : Inoxpa Usage : Powder Blending - Homogeniser Capacity : 5000 L/h Y.o.m 2016 Powder Inlet Funnel Product Inlet Pump Product Outlet pump for circulation Bodpfx Aaexnx Dzo Nsld Sample Valve Stainless steel skid mounted Condition : Excellent

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station Bedpsx Dkk Sjfx Aa Neld - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1996, condition: used, Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Blsdpfjvw Al Eex Aa Nod Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX - Number of gathering stations: 18 - Optical sheet control - Pump(s) - Distribution unit - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 - Colour monitor - Pre-loader - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Bsdpfxot Sz T He Aa Nold Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 Bljdjylw Dcjpfx Aa Nod • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device

Condition: ready for operation (used), Year of construction: 2006, operating hours: 115,000 h, travel distance Y-axis: 120 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2006. It features a Y-axis travel of 120 mm, a turret with 12 stations, and driven tools on both turrets. The machine is equipped with a Siemens 840D control system and includes a collision monitoring system. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main spindle and sub spindle • Electronic gearbox • Additional V24 RS232 interface in electrical cabinet • Transmit / Tracyl function • MDE interface (machine on, machine running, part counter) • Collision monitoring system Marposs (Brankamp) CMS100 • 3D machine model for kinematic simulation in CAM system • Electrical cabinet cooling unit (2 units) • Main spindle D65 with HAINBUCH pull-type collet clamping • Sub spindle D60 with HAINBUCH pull-type collet clamping • Stop device • Coolant flushing of sub spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Automatic sliding door (hydraulically actuated) Bedpsylwuhefx Aa Njld • ROTOCLEAR viewing window • Coolant pump 80 liters / 8 bar • High-pressure pump 80 bar • High-pressure coolant connection for slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • UNIMAG interface • Operating hours: approx. 115,000 h Additional equipment • Portal unloading unit with actuated NC-controlled gripper • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (for emulsion use) • Multi-channel bar loader: Breuning / IRCO PROFImat 65.8 PR*270/8 • Year of manufacture: 2006 • Bar capacity: up to 3 m length • Maximum bar diameter: D65