Used Manometer for sale (219)

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. Hfsdjz Eq Epopfx Ag Ton ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm Hjdpfx Ajz I Ig Nog Tefn 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Year of construction: 2023, condition: used, functionality: fully functional, AERZEN Delta Blower with Invertek Drives Optidrive ECO unit Year of manufacture: 2023 Details Brand: AERZEN Roots blower type: GM15L 15 kW Dimensions: approx. 125x135x151 cm Model designation: Delta Blower Quantity: 1 Design: enclosed unit with ventilation grille and manometer Color: blue/grey Operating manual included Invertek unit Brand: Invertek Drives Product name: Optidrive ECO Rating: IP66 / NEMA 4X Condition Hfodpfx Agez Iq Dqo Ton Condition: used

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Hjdpozwdwrsfx Ag Tofn Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages).

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Hfedpfx Agsz Ng Aye Tsn Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: good (used), Year of construction: 1999, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into meat pieces, with and without bones. The MM-26 series is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops) due to its more compact dimensions. The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, unlike modern touchscreen controls, are hardly susceptible to costly electronic damage. Technical data: Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Trade name: MM-26 / Meat Master 26 Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (high voltage) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection/needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. Hedpfxez Dtg Ho Ag Tjfn "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 900 mm, workpiece width (max.): 350 mm, overall weight: 500 kg, spindle speed (max.): 17,150 rpm, spindle motor power: 1,500 W, input voltage: 230 V, Very nice, compact milling machine for model and prototype construction, as well as small parts. Exceptionally well-maintained machine from model construction. ISEL EuroMod MP30 model Hjdpfx Aez Nv Dysg Tofn Machine, manufactured in 07-2017 Travel ranges X/Y axes: 610/300 mm Z-axis stroke: 300 mm Table clamping surface: 900 x 350 mm Travel speed X/Y/Z: 15 m/min Machine dimensions: Width: 1205 mm Width with control cabinet: 1488 mm Depth: 845 mm Height (door closed): 2123 mm Height (door open): 2418 mm Control panel: iOP-19 touchscreen with keyboard and mouse CAN controller: iMD • Pneumatics: Integrated pneumatic air preparation unit from Festo with pressure regulator, manometer, and filter units. • Internal housing cooling: Cabinet climate/cooling unit mounted on the lower housing door. • Housing type: Fully enclosed aluminum profile housing with transparent sliding doors made of safety glass/polycarbonate and hazard warning signs.

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company. Hfsdoz Spgpepfx Ag Ten

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: P-000003, Zum Verkauf steht ein professionelles industrielles Hochdrucksystem ECOROLL HGL3.01, Baujahr 2015, hergestellt von ECOROLL AG Werkzeugtechnik, Celle, Deutschland. Die Anlage verfügt über ein integriertes Hochdruck-Speichersystem, eine Siemens SIMATIC Steuerung, Drucküberwachung, Hochdruckarmaturen sowie ein Bedienpanel. Die Anlage wurde vor dem Verkauf angeschlossen und auf Funktion geprüft. Sie lässt sich ordnungsgemäß starten, die Steuerung funktioniert und das System baut Druck auf. Verkauft wird die komplette, auf den aktuellen Fotos dargestellte Anlage. TECHNISCHE DATEN Hersteller: ECOROLL AG Werkzeugtechnik, Celle, Deutschland Typ: HGL3.01 Baujahr: 2015 Seriennummer: P-000003 Max. zulässiger Druck (PS): 300 / 245 bar Leistung: 5,5 kW Spannung: 400 / 690 V Frequenz: 50 Hz Eigengewicht: 786 kg Hsdpfx Aszv Rmdeg Tjfn Zulässiger Temperaturbereich: +5 bis +45 °C Kennzeichnung: CE 0045 HOCHDRUCK-SPEICHERSYSTEM Die Anlage ist mit Hochdruckbehältern der Firma Hochdrucktechnik Leimpek ausgestattet. Technische Daten laut Typenschild: Betriebsdruck PS: 300 bar Prüfdruck PT: 450 bar Volumen: 150 Liter CE-Kennzeichnung: 1637 STEUERUNG UND AUSSTATTUNG * Siemens SIMATIC Bedienpanel * drei Manometer zur Drucküberwachung: Speicherdruck, Systemdruck und Primärdruck * Not-Aus * Hauptschalter * Kompressorsteuerung * Steuerung der Hochdruckventile * Hochdruckarmaturen * Rohrleitungen und Verbindungsschläuche * integriertes Druckspeichersystem TECHNISCHER ZUSTAND Die Anlage ist funktionsfähig und wurde vor dem Verkauf getestet. Das System wurde angeschlossen und in Betrieb genommen. Bedienpanel und Steuerung funktionieren ordnungsgemäß. Die Anlage lässt sich problemlos starten und baut Druck auf. Der optische Zustand entspricht den aktuellen Fotos. Normale, dem Alter und industriellen Einsatz entsprechende Gebrauchsspuren. Eine Besichtigung der Anlage ist nach vorheriger Terminvereinbarung möglich. PREIS: 12.900 € netto – Verhandlungsbasis Gewicht: 786 kg. Abholung und Organisation des Transports können mit dem Käufer abgestimmt werden. Bei Interesse können weitere Detailaufnahmen der Anlage und der Typenschilder zur Verfügung gestellt werden. Anlage sofort verfügbar.

Condition: used, Candles: 12 cartridge height [inch]: 30 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring Hfodpjz N Eqijfx Ag Tjn closure: parrotlip Fittings: draining outlet, manometer, deaeration

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Hfsdpoz Sltwjfx Ag Ton Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: used, Kärcher Hot water high-pressure cleaner / steam cleaner Kärcher HDS 1195 S Eco Up to 180 bar working pressure and 1,200 l/h flow rate Hot water and steam operation up to 155 °C For sale is a used hot water high-pressure cleaner from the manufacturer Kärcher. The Kärcher HDS 1195 S Eco is suitable for professional cleaning tasks in industry, trade, and commerce. The combination of high working pressure, hot water, and steam operation allows even stubborn soils as well as oil and grease residues to be removed. Technical data: Manufacturer: Alfred Kärcher GmbH & Co. KG Type: HDS 1195 S Eco Article number: 1.028-337 Equipment type: Hot water high-pressure cleaner Country of manufacture: Germany Mains connection: 400 V / 3~ / 50 Hz Connected load: 8.2 kW Fuse rating: 16 A slow-blow Protection class: IPX5 Working pressure cold/hot water: 30–180 bar Maximum permissible pressure: 198 bar Flow rate: 600–1,200 l/h Flow rate steam operation: 600 l/h Working pressure steam operation: max. 28 bar Hot water temperature: max. 98 °C according to the data plate Steam temperature: max. 155 °C Burner output: 103 kW Fuel: Diesel or heating oil EL Maximum heating oil consumption: 8.3 kg/h Fuel tank: 25 liters Detergent tanks: 20 + 17 liters Maximum water inlet temperature: 30 °C Required water inlet flow rate: min. 1,500 l/h Dimensions (L × W × H): 1,285 × 690 × 875 mm Net weight: 155 kg Gross weight: 185 kg Equipment: Hot water and steam operation Pressure and flow rate regulation Continuously variable temperature control Detergent dosing valve Integrated fuel tank Two detergent tanks Hodpfxez R Skye Ag Tsfn Manometer for pressure indication Indicator lights for operating states Mobile unit with transport rollers Hand spray gun and spray lance as shown in the pictures Application areas: Industrial cleaning Machine cleaning Vehicle cleaning Workshop cleaning Construction machinery cleaning Agricultural operations Cleaning of production plants Removal of oil and grease Cleaning of heavily soiled surfaces Commercial and industrial applications Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Visible corrosion spots on the control panel Scope of supply: 1x Kärcher HDS 1195 S Eco hot water high-pressure cleaner Hand spray gun and spray lance as shown in the pictures Other accessories as shown in the pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions on the telephone.

Condition: used, Year of construction: 1992, Vacuum tumbler Germo KT 2000 (2000L) Equipped with a loading system Hfedpfx Aezb Exgeg Ton For sale is a ready-to-use industrial vacuum tumbler Germo (Type: KT 2000) with a drum volume of approximately 2000 liters. Ideal for meat processing plants for efficient processing and marinating. Key data & details: Manufacturer/Type: Germo KT 2000 Capacity: approx. 2000 liters Material: High-quality stainless steel (rustproof) Equipment: Integrated vacuum system with manometer, analog-digital control panel, emergency stop switch, CEE plug Advantages: Rapid brine absorption under vacuum, robust construction, easy cleaning Condition & sale: Inspection: Possible by appointment at the location.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Hjdpfx Agjzhadcs Tofn Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system Hfedpfxozg U Tis Ag Tsn from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, FRIULAIR Industrial Chiller / Water Cooler / Chiller Friulair CWE068 Nominal cooling capacity 48.5 kW according to the nameplate Year of manufacture 2023 – air-cooled industrial chiller with integrated water circuit For sale is a used industrial chiller from the manufacturer Friulair S.r.l., model CWE068. The chiller is suitable for cooling industrial plants, machines, test benches, production facilities, and process circuits. The CWE series is designed as an air-cooled water cooling system for industrial continuous applications. Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Type of equipment: Industrial chiller Year of manufacture: May 2023 Country of manufacture: Italy Cooling capacity according to the nameplate: 48.5 kW Operating conditions according to the nameplate: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant circuit: Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit volume: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. operating pressure high-pressure side: 41.5 bar Max. operating pressure low-pressure side: 29 bar Temperature range refrigerant circuit: -10 °C to +120 °C Water circuit: Water volume: 200 liters Max. operating pressure: 6 bar Temperature range water circuit: -10 °C to +30 °C Electrical data: Power connection: 3 / 400 V AC ±10 % / 50 Hz Electrical power according to the nameplate: 24.1 kW Current draw: 41.3 A Hfedpfxozy U Uae Ag Ton FLA: 47.4 A Fuse rating: 63 A Protection class: IP54 Equipment: Air-cooled chiller Axial fans Integrated refrigerant circuit Integrated water circuit / buffer tank Circulating pump Manometers for high and low pressure Pressure gauge water circuit Main switch Electrical control Hydraulic inlet and outlet connections Closed industrial housing Applications: Industrial cooling Process cooling Machine cooling Test bench cooling Production facilities Machine tools Laser systems Plastics processing Electronics and power electronics testing Research and development Dimensions / Transport: Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Empty weight: approx. 390 kg The transport data is based on the manufacturer's information for the corresponding CWE model size. The actual external dimensions can be checked again before shipment. Condition: Used Year of manufacture 2023 Optical condition according to the pictures. Scope of delivery: 1 x Friulair CWE068 industrial chiller Equipment and connections as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Hfedpey A Tpqjfx Ag Ton Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Julabo Type: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Top condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a powerful industrial cooling unit for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are working, and the display and controls operate perfectly. Typical applications: Machine and process cooling Laboratory and testing technology Plastic, laser, or system cooling Highlights: Robust industrial design Digital temperature display External control (RS232) Alarm connection Wheels for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Filling quantity: 1.625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: -20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): approx. 1.3 kW at -20 °C approx. 5.5 kW at 0 °C approx. 7.4 kW at +20 °C Connections & equipment: Inlet and outlet (industrial connections) Manometer Shut-off valve Hedpszix D Dsfx Ag Tofn RS232 interface Alarm contact (max. 30 V / 1 A) Wheeled chassis Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.) Dimensions (H x W x D): approx. 1050 x 550 x 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: Julabo FLW7006 recirculating chiller Connection cable Shipping method: Freight shipping on a pallet (upon agreement, shipping costs depend on the destination) Pickup: possible by appointment. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area Hedpjxrby Hofx Ag Tofn - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) Hodoztrk Ejpfx Ag Tjfn -Work area: 1100x660x700 mm -Integrated dust extraction system -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window -Documentation Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Hjdpfxezuzw Dj Ag Tofn Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, INFICON Hydrogen Leak Detection System / Hydrogen Leak Detector INFICON Sensistor ISH2000 with TGF10 Tracer Gas Filler Complete system for professional hydrogen leak detection with AP57 search probe. For sale is a used hydrogen leak detection system from the manufacturer INFICON. The system consists of the Sensistor ISH2000 hydrogen leak detector, the TGF10 tracer gas filler for automatic evacuation and filling of test specimens, and an AP57 search probe for precise leak detection. The hydrogen trace gas method is suitable for the fast and precise leak testing of pipelines, heat exchangers, pressure vessels, refrigeration and air conditioning components, and industrial assemblies. Technical data Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Made in Sweden Supply voltage: 100 - 240 VAC Mains frequency: 50 / 60 Hz Display: LCD Printer port Probe control port APC system for controlling external components INFICON TGF10 Tracer Gas Filler Article number: 590-557 Connections: 4 x ISO G1/4" Manometer: -1 to +9 bar Trace gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Ultimate vacuum: -0.85 bar Filling rate: 600 Nl/min Dimensions: approx. 100 x 275 x 205 mm Weight: approx. 4.7 kg Functions Hydrogen leak detection with forming gas Automatic evacuation of test specimens Automatic filling with trace gas Leak detection with AP57 search probe Acoustic and visual leak indication APC-controlled test sequences Suitable for industrial use for series and individual tests Equipment INFICON Sensistor ISH2000 INFICON TGF10 Tracer Gas Filler INFICON AP57 Counter Flow Probe Connection cable Power cable Original packaging ISH2000 Original packaging TGF10 Accessories as shown in the pictures Application areas Industrial leak detection Leak testing Pipeline testing Heat exchanger testing Refrigeration and air conditioning technology Pressure vessel testing Automotive industry Manufacturing and testing systems Scope of delivery 1x INFICON Sensistor ISH2000 1x INFICON TGF10 Tracer Gas Filler Hjdpfx Agszdggwo Tsfn 1x INFICON AP57 Search Probe 1x Cable set 1x Power cable Original packaging Accessories as shown in the pictures Condition Used Devices come from an industrial environment Optical condition as shown in the pictures Display is active Original packaging available Normal storage and signs of use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors and prior sale. We can gladly answer any further questions by phone.

Condition: used, Despatch Despatch laboratory oven + 8” WAFER LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 control with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel inner chamber with continuously welded inner seams on the insulation side to protect the working area from contamination The programmable door lock prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open Hfsdpfxjzdr Eks Ag Ten The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication link (RS485) for remote monitoring and recording Chamber dimensions L 350 mm Chamber dimensions W 350 mm Chamber dimensions H 350 mm Maximum temperature 260°C Digital display Yes Electrical connection 230 V Overall dimensions L 830 mm Overall dimensions W 910 mm Overall dimensions H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC Hfodpjzcxbwofx Ag Tsn • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: used, functionality: unexamined, Hydraulic double-column deep-drawing press with a draw cushion. Modified in 2002 by neff Pressen, Karlsruhe, according to VBG 7n5.2. Modification No. 55377, modification date 10/2002. Ram and table with T-slots, table with ejector bores for the draw cushion. Roller conveyor in front of the press area, light curtain on the operator side, pendant control unit with emergency stop for the ram and draw cushion. Hydraulic unit with control panel: pressure setting and manometer for the ram and draw cushion, pressure stage valves; separate control cabinet with operating panel. After-travel distance 12 mm, after-travel time 147 ms, minimum distance of the light curtain to the tool hazard area 294 mm. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading upon agreement. All information without guarantee. Hfodpez A Uncefx Ag Tsn