Used Manual Edm Machine for sale (90,600)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Nwedpjxggdmjfx Ah Usr Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: good (used), Year of construction: 1992, Two-component silicone system. With swivel arm, trumpet, and gun. Height: 2450 mm. Nwsdjxpnw Hspfx Ah Usr Width: 1180 mm. Depth: 1000 mm. Weight: approx. 450 kg. Condition: good, second-hand

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Nwjdpfxepgmq Us Ah Usr Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Nsdpfowtd Edjx Ah Uowr

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: ATH ADV 3 with C AXIS, workpiece weight (max.): 2,000 kg, input frequency: 50 Hz, positioning accuracy: 0.005 mm, Description AGIE ADVANCE 4 Nedpsv Rftlefx Ah Uowr Travel/ races (X/Y/Z) 550 x 350 x 400 mm Max. Workpiece dimensions 920 x 750 x 370 mm Surface support 870 x 550 mm Max. workpiece weight Workpiece weight (without bath) 2000 kg Max. electrode weight Electrode weight 80 kg Table/quill distance min. 215mm Max table/keel distance. 615mm Quill stroke 400 C-axis Integrated, 0 - 55 rpm Generator power 60 A Dielectric integrated Details • X axis:550 mm • Y axis:350 mm • Z axis:400 mm • C axis: Yes • Max workpiece length: 920 mm • Max workpiece width:750 mm • Max workpiece height: 370 mm • Max workpiece weight: 2000 kg Conditions and size • Status:Visible • Condition: Good • Length:2050mm • Width:1800mm • Height:2868 mm • Weight:4200 kg Make offer / Make offer

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Njdew R En Hjpfx Ah Uswr

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Njdeuuz Iijpfx Ah Ujwr Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: good (used), Year of construction: 2001, Two-component silicone system. Height: 2600 mm. Width: 1300 mm. Nedpfx Ahjxpnvce Uswr Depth: 1100 mm. Weight: approx. 450 kg. Condition: good, second-hand

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Nedpfxsxu Hvlo Ah Ujwr Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: used, functionality: fully functional, Year of construction: 1986, operating hours: 20 h, control type: manual, actuation type: manual, working width: 1,030 mm, lower beam adjustment: 40 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 615 kg, total length: 1,800 mm, total width: 1,300 mm, total height: 1,080 mm, Equipment: documentation/manual, Manual folding machine Manufacturer: TST Model: XO 1000/3A Year of manufacture: 1986 Condition: used Very robust machine made from solid cast iron. Interchangeable bending jaws made from milled steel. Upper beam opening: 110 mm Bending beam stroke adjustment: 40 mm Working width: 1,030 mm Sheet thickness (steel St37): 1.5 mm Sheet thickness (aluminium): 3 mm Bending angle: 135° Nedpfxexwvhvo Ah Uowr Weight: 615 kg Required space: 1,800 x 1,300 mm Operating and maintenance manual available.

Condition: used, functionality: fully functional, machine/vehicle number: 1270, Year of construction: 1999, DISINTEGRATOR FOR SPARK ERODING BROKEN DRILLS AND TAPS - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V Nodpfoxniv Uox Ah Uowr - 10 kVA - 15 A - 50 Hz - Serial No. 1270

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Nwedeg Icdyepfx Ah Ujr Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Nodpfxoxbzime Ah Uswr Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Year of construction: 1997, condition: good (used), Agie EDM sinking machine Type: Futura V1PM Mondo star 50 X-travel: 500 mm Y-travel: 350 mm Z-travel: 350 mm Bed: 750 x 550 mm Workpiece weight max: 500 KG Nwjdpfjldg Sgex Ah Uor Dimensions workpiece max: 860 x 650 x 315 mm LxWxH Dimensions tub: 1020 x 680 x 400 mm LxWxH Dimensions machine: 195x155x255 cm LxWxH Year: 1997 Included documentation, software and tools

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Nsdpfx Aem Uyuxsh Ujwr Water bath incl. cooler Automatic wire threading

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine Nwodpfx Aoxf I D Ejh Uor travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition year 2002

Condition: excellent (used), Year of construction: 2012, Offer very good flexo imprinting machine. Nwodpjqmnfhjfx Ah Ujr Manufacturer is the company Sondermaschinenbau Oschersleben. Flexo machine 1 color. Very well maintained condition and ready for immediate use incl. various extras.

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown Nsdswhf Hfepfx Ah Ujwr - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Nwjdpfx Ajxlchfsh Usr Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A Nodpfxohkttte Ah Uewr X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm Nwodotylguopfx Ah Uer - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Njdpfofifbbjx Ah Ujwr Manufacturing EU immediately available ex works Freight costs on request

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Nsdpfxji E Iz Is Ah Uowr Weight (without cables): 7 kg NEW – unused, from stock

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank Nwjdpfx Ahjw Uhamj Usr - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Nsdpfx Ahsvg Rh Te Ujwr Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused