Used Microwave Furnace for sale (905)

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Bedpfxsg R Sh As Aczedk Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Plasma-nitriding furnace, make Ipsen Bedpfxjxc D E He Aczsdk type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R Bedpfevkhl Djx Aczsdk 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: Bsdsxcybkspfx Aczodk - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Bdedpfeu A Tf Dox Aczjk Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Bdedpfx Aowi Ry Hsczek Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg Bsdei Db Dbopfx Aczedk dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm Bedpfx Acsclupdjzjdk height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Bedpfx Acoxr S Rpszsdk Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Year of construction: 1991, condition: used, functionality: unexamined, Natural gas-fired, removable car-type batch furnace / kiln / oven for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Bdjdpfx Acexvtatezjk Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Condition: good (used), Year of construction: 2002, ESG: 6 - 19 mm, TVG: 4 - 12 mm, Size that can be covered: 2800 x 6000 mm, Power: Bodpfx Aorck Hwjczsdk Heating: 1060 kW, Motors: 235 kW, Total power: 1295 kW.

Year of construction: 1969, condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Frame (WxDxH), approx.: 310 cx 355 x 755 mm Oven (WxDxH), approx.: 370 x 550 x 400 mm Bdodpou Atiiofx Aczjk Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Equipment: - Various tongs

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, number of chambers: 1, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,500 mm, transport length: 5,500 mm, TECHNICAL DETAILS Workpiece Maximum glass dimensions: 4,200 mm x 2,500 mm Chamber Dimensions Chamber volume: approx. 21 m³ Chamber height: 3,100 mm Chamber length: 4,400 mm Chamber width: 1,600 mm MACHINE DETAILS Bdedpfxsw Slcms Aczsk Control system: Siemens SIMATIC Door Dimensions Clear door height: 3,000 mm Clear door width: 1,600 mm Space Requirements Footprint (L x W x H): 4,700 x 3,000 x 4,200 mm Base width: 2,700 mm Unit transport length: 5,500 mm Insulation Ceiling insulation: >170 mm insulating material Side panels and door insulation: >120 mm insulating material Floor insulation: >50 mm insulating material Heating: electric Temperature control: optimized EQUIPMENT Optimized heating and fan performance Tamper-proof data recorder with industrial USB interface IT interface and order allocation User-friendly display with energy consumption indicator

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Bdodpfx Aourf H Roczjk Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. Bdedpfx Acexguqnjzok In good technical condition. Disassembled and ready for loading.

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car-bottom combustion furnace (fired by natural gas or LPG) model ST/BT for heat treatments on ferrous metals such as cast iron or steels, for temperatures up to 1000°C, complete with 1 removable trolley and automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. Bdedpfjw Ifl Tex Aczjk CE certification declaration 12-month warranty Brand new machine, made in Italy The specified features and attached photos are for indicative purposes only; customized equipment tailor-made for each thermal process is available upon request.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m Bjdpfx Aexfcdyeczedk - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: used, Year of construction: 2007, 2 (two) chambers Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE The line is currently dismantled and stored in our warehouse as shown on the pictures. Bdedpfx Aoiqn Aioczsk

Condition: used, Anton Paar Synthos 3000 microwave oven Technical data Rotor 4x24MG5: Maximum volume: 5ml Working volume: 0.3-3.0ml Max. Working pressure: approx. 30 bar Max. Temperature: 80°C You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! Bodpjvgc T Ijfx Aczedk You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is Bdedpfxeim Ik Se Aczsk painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Bdsdsxcb Hnspfx Aczok Max temperature: 1000°C

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Bdsdpfexdantex Aczek

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Bsdpfxog S U Dkj Aczjdk

Year of construction: 2019, condition: like new (used), Chamber oven EHS (Netherlands) Bjdpfswun Ifjx Aczjdk temperature: 50 - 150 °C 6 chambers of 1400x800x2400 mm 12 electric heaters, each 3 kW 400V / 63A loading up to 1400 kg per chamber

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave system Bdsdpfxewhvcwj Aczek System and functional description Microwave system consisting of two MW50 V microwave modules, an inner roller conveyor and two outer roller conveyors. The actual microwave chamber consists of a 3 mm stainless steel sheet and has switch cabinet segments permanently mounted on the long side in which the high-frequency components are installed behind mechanically and electrically secured covers. The roller conveyor system for transporting the pallet within the system is manufactured in microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which emit energy directly into the chamber interior. This technology guarantees an even distribution of energy within the chamber. The magnetrons can only be switched on when the door is closed and pressed down. The sealing system at the door opening prevents microwave leakage radiation. Any vapors generated are extracted via 2 extraction fans with a total capacity of 17,000 m*/h (free-blowing) . The necessary cooling of the high-frequency components takes place via the air flow of the extraction fans, supported by 4 supply air fans (free blowing capacity a' approx. 3,500 m*/h). A roller conveyor with its own drive is located in front of the system. The pallet is loaded and unloaded manually by the customer. Initiators are used to check whether the pallet is correctly positioned on the roller conveyor. The program is started at the control panel using a switch. The loaded pallet is transported into the microwave unit and positioned using a light barrier. The doors of the microwave system are closed and the microwave exposure is switched on . After the microwave exposure time has elapsed, the door is opened and the pallet is transported onto the unloading roller conveyor. The switch-on time of the magnetrons can be preselected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Back-up fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight; 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been in use New price €300,000 Further ovens in other sizes - new and used - can be found in our store! International shipping costs on request!