Used Microwave Furnace for sale (840)

Condition: new, Electrically heated continuous furnace, make VEI-Engineering Dcedpfx Alod Sg Hho Nsh type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: not inspected (used), Padeltherm shaft furnace Dodpfxsywt I Nj Al Nech Must be dismantled and collected by the buyer.

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min Dsdpfxjp T T Hns Al Nsch number of conveyor plates: 266 pieces channel height: 105 mm

Condition: new, Electrically heated conveyor furnace Dcodpfxogvmg Hs Al Neh

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar Dedshgiz Iopfx Al Nsch exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH Dcsdpfx Aexc D E Hjl Nsh useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW Dcodscmr D Hspfx Al Njh fans power: 2 x 4 kW

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C Djdpfx Aoxpuahsl Nsch temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. Dcjdpfxeyr Atps Al Noh If you have any questions or require further information, please feel free to write us a message or give us a call.

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Dcodpfeurf H Rex Al Neh Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz Dedpjclupdofx Al Nech power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Dcodpfjxcybkox Al Noh Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Dsdpfx Ajd I T Exol Nech

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Dcsdpfsym U Sgjx Al Noh Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Dcodpexp Rbhofx Al Neh

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Dcsdpsyfv N Rofx Al Njh

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Dcedpfx Alowkiips Nsh

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Dcjdpfx Aljvxvgrs Neh

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Djdpfx Alsw Igvte Nech

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Dsdpfxoygw S As Al Nech

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Dcjdpfotxb Avsx Al Noh

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Dcjdpfx Asw Emyzel Neh

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Dsdpfx Aloxt Rmlo Njch

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Dcsdpfxjtxb Aps Al Nsh

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Djdstndwujpfx Al Njch