Used Microwave Furnace for sale (930)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Giedpfx Aned I T Exslou For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Gjdpfxew Hqldj Anleiu It is possible to heat flat bars, round rods, or square rods.

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Godpfeyr Atpjx Anlsiu Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call.

Condition: not inspected (used), Padeltherm shaft furnace Must be dismantled and collected by the buyer. Gsdoywt I Nepfx Anleiu

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Gsdpsxp Rbhsfx Anleiu

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Giodeyfv N Ropfx Anlsu

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Gsdjw Igvtspfx Anloiu

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Gijdpfxevxvgrs Anlsu

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Gisdswkiipepfx Anleu

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Gjdpetxb Avjfx Anljiu

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Gisdpfxjxt Rmle Anlou

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Gsdpfx Anoygw S Aeljiu

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Giodpfjw Emyzox Anlou

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Giedpfxstxb Apo Anlsu

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Gjdpfx Anetndwusloiu

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Gedpfx Aeym U Sgsnleiu Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Glass thickness: 4 - 19 mm Giedjik E Sropfx Anlou Start-Up: 2018

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm Gedpfsipx Dyex Anloiu KW: 814,5 Dimensions: length = 22 m, width = 7 m

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° Gisdpfx Asw Nnqujnlju MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Giodpsxcb Hnofx Anleu Max temperature: 1000°C

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Godpfx Aepcgzgonljiu

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Gijdpoqgfbgofx Anlju

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Gjdpfx Anjifpuasleiu

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Gsdpfx Aeq Ttz Esnloiu

Condition: new, Year of construction: 2025, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Gijdpfxspkwhqs Anlou Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg