Used Moisture for sale (281)

Condition: excellent (used), Vötsch Type: VCS³ 7027-10 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Data for temperature testing: Temperature range: -72°C to +180°C Bwsdozh Huuopfx Aprsp Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 10 K/min Cooling: 14.5 K/min Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% relative humidity, regulated for max. 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% relative humidity Humidity range: 10% to 98% relative humidity (extended climate range: 2°C/95% relative humidity, regulated for max. 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Nominal voltage: 3/N/PE AC 400 V ±10%, 50 Hz Nominal power: 14 kW Nominal current: 26 A Fuse, on customer’s side: 63 A, slow-blow Refrigerant: R404A/R-23 Weight: approx. 835 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), CTS C-70/350 Climate Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: C-70/350 Equipment Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Testing Chamber Volume: approx. 350 liters For sale is a used CTS C-70/350 climate testing chamber from an industrial application. The system is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Humidity Range: 10 % to 98 % RH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temperature Stability (over time): ≤ ±0.3 K Bwjdpfezd D Nzsx Aprjp Humidity Stability I: ≤ ±1.5 % RH Humidity Stability II: ≤ ±3 % RH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Heat Radiation at +20 °C: approx. 3000 W Testing Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Connected Load: approx. 7.1 kW Rated Current according to Nameplate: approx. 11.5 A Protection Class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerant: Pre-cooling Stage: R404A, approx. 2.3 kg Cooling Stage: R23 Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch Control Panel Viewing Window in the Door Interior made of Stainless Steel Testing Chamber Lighting Insert Grid made of Stainless Steel Feedthrough Ø 50 mm on the right, center Capacitive Humidity Measurement System Software Temperature Limiter Min. / Max. USB Port for Data Storage Ethernet Interface RS232 Interface Air-cooled Design Documentation / Operating Manual Service / Inspection Condition: Used Optical Condition as shown in the pictures Normal signs of wear and tear from use and storage Scope of Delivery CTS C-70/350 Climate Testing Chamber Insert Grid Control Panel / Controller Documentation / Operating Manual Accessories as shown in the pictures Inspection possible after prior appointment. Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Bwjdpfx Ajy Iam Hoprep Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual operation / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Bwodpoy I Tdxsfx Aprop Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test specimen control Scope of supply: CTS Climate Test Chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Other: Inspection possible by arrangement Loading can be organized Commercial sale (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Model: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (Actual) / 5.00 °C (Set). Humidity: 39.7 % RH. Water supply: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Functional Test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in the pictures. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. Bwjdoy H H D Aspfx Aprep If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Design: Climate testing chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate tests. Used in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Bwsdpsy H Hl Hefx Aprop Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Service prior to delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition, see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die from DIL Engineering GmbH, a specially developed solution for texturing alternative proteins in high-moisture extrusion (HME). The cooling die is ideal for use in research and development and enables the targeted production of fibrous, meat-like textures, which are in high demand particularly in modern meat and fish alternatives as well as in the snacks and convenience foods sector. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow control and fiber formation. The system has a modular design and can be configured with one or two segments depending on requirements. Additionally, one or two separate cooling circuits are available, ensuring precise temperature control and thus consistently high product quality. The integration of inline measurement systems is possible and allows for continuous process monitoring and optimization. Bwsdpfsy D Hrbjx Aprep Particular emphasis was placed on hygienic design, ensuring that the system meets the high standards of the food industry. Its well-thought-out design makes cleaning quick and easy, which is a significant advantage, especially in a development setting. The FiberFlow F50 is ideal for pilot trials, product development, and the optimization of formulations in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Condition: good (used), functionality: fully functional, The residual moisture meter from HeGoPolyForm is for sale. The original purchase price of the device was approximately €2900. It can measure moisture levels from 0-100%. Bjdpjzbx N Sjfx Aprowp It has a program memory with 999 settings. The weighing range is 60 grams. Data can be transferred via PC, printer, or USB stick.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, For sale is a FiberFlow R500 cooling die, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The cooling die is used to produce fibrous protein structures in a targeted manner through defined cooling and flow control, and is particularly designed for applications in the field of plant-based meat and fish alternatives, as well as structured convenience products. Bjdpfx Apjy Um Tgjrewp The FiberFlow R500 is designed for a throughput of up to 500 kg/h at pressures of up to 70 bar. The ring-shaped geometry ensures optimal flow control, which leads to uniform fiber formation and high product quality. The system has a modular design and comprises 4 segments, which are sold together. Particular attention was paid to hygienic design, ensuring that the system meets the high requirements of the food industry. The design allows for easy and quick cleaning. The FiberFlow R500 is designed for integration into existing extrusion lines and can be seamlessly integrated into continuous production environments from a process engineering perspective.

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Bsdpfx Apey H Hmworjwp Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test item protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / demineralized water inlet Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test item control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS climate testing chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be organized. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Bodpfxsy Hkazs Aprowp 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: excellent (used), For sale: Bedezdq Nnepfx Aprowp FINSCAN moisture meter scan moisture meter, measures dried lumber. (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Located in Finland.

Condition: excellent (used), Mettler Toledo Moisture Analyzer / HB43-S Mettler Toledo HB43-S Moisture Analyzer Laboratory Quality – Top Condition – Never Used!! Description: For sale is a high-quality Mettler Toledo HB43-S moisture analyzer (halogen technology) from professional laboratory use. This device is used for rapid and precise determination of the moisture content in samples (e.g., food, plastics, pharmaceuticals, chemicals, powders, granulates, etc.). Measurement is performed by heating with a halogen lamp and simultaneous weighing; the moisture content is then calculated automatically. Special Feature: The device has never been used and is therefore in mint condition. Ideal for: - Quality control - Laboratory applications - Production & incoming goods inspection - Research & development Features: - Automatic moisture determination (% moisture / % dry matter) - Halogen heating technology (fast & precise) - Integrated precision balance - Simple menu navigation - Start/stop keys for quick operation - Various drying programs - RS232 interface (e.g., for printer/PC connection) Technical data: Model: Mettler Toledo HB43-S Maximum weighing range: 54 g Readability: 1 mg Heating system: Halogen Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 2 A Interface: RS232 Dimensions (approx.): Width: ~ 20 cm Depth: ~ 33 cm Height: ~ 15 cm Weight (approx.): ~ 4–5 kg Condition: used – never operated Bwjdpfx Aoyxnpwjprep Scope of delivery: (see picture) - Mettler Toledo HB43-S device - Sample holder / weighing unit - Power cord - Documentation / manuals - Accessories (see photos, e.g., sample pans) (Subject to change and errors in technical specifications!) For further questions, we are happy to assist you by phone.

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermo-expansion valve, Moisture-Liquid Indicator -Manufacturer: Alco, Moisture-Liquid Indicator, unused original packaging -Type: AMI-1 MM 3/PCN 805707 -Connections: 3/8 "/10 mm Bjdpfofylczsx Aprswp -Price: per piece -Number: 3 piece -Dimension package: 130/55/H40 mm -Weight: 0.3 kg/piece

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Bwodpfjx Ac Utex Aprop Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Condition: like new (used), Panametrics Series 5 Hygrometer Moisture Analyzer We sell the complete box, like in the pictures Price Euro 900 Euro + VAT, negotiable, FCA: Oradea/Romania Bjdpfx Aog Thuajprjwp Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Bwsdpfxozab Stj Aprsp Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip feeding screw Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Bsdpezii Aqofx Aprowp Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Bwjdpow N Nkpofx Aprop - Manufacturer: Gesete - Model: XT 500 - Year of manufacture: 2014 - Application: Bottle drying before labeling (Etima)

Condition: new, Year of construction: 2022, functionality: fully functional, Extruder for protein, TVP, and high-moisture analogues. 110 kW. This equipment has never been used and is complete. Pre-conditioner Extruder Polycool 500 and one Polycool 1000 6 cooling and heating regulators, Thermoplas. Dosing system, Bühler (loose weight) for protein Bwjdszh I Dqepfx Aprep Stainless steel control panel Venting system for the extruder Dosing system for liquids (Netsch)

Condition: used, Colour: Grey The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Bwedpfx Apswnhxdsrop Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 7 - └ Unit 1: - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Bjdozcf Dlepfx Aprewp Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: ready for operation (used), functionality: fully functional, The THIMON SWING PRO 5-sided strapping machine is a state-of-the-art industrial solution designed to provide complete pallet strapping using a single consumable. Thanks to its patented triangular arm technology combined with a motorized rotary table, it performs the packaging of all five sides of the pallet in a single cycle, while guaranteeing excellent load stability. This technology improves the protection of goods against dust, moisture, and stresses related to transport. Designed for the food processing, logistics, pharmaceutical, paper, or manufacturing industries, the WRA-PAL SWING PRO combines a high throughput with reduced stretch film consumption. Its motorized pre-stretch module and 1,000 mm film width allow for a reduction in consumable usage of 20 to 40% while improving load retention. Furthermore, its capacity to accommodate reels up to 100 kg offers significantly greater autonomy than conventional systems and limits production downtime. The machine easily adapts to different pallet sizes thanks to its numerous adjustments. Its cutting and heat-sealing device eliminates film tails at the end of the cycle, while its patented pleated film system reinforces the cohesion between the pallet and the load. In addition, the use of a single film for all five sides guarantees inviolable product protection and improves their preservation during storage and transport. At Europ'Équipement, this strapping machine undergoes a complete overhaul before being sold. Each component is inspected, serviced, and tested to offer manufacturers a reliable, high-performance, and immediately operational solution, while significantly reducing the investment compared to new equipment. Technical specifications: Packaging of all 5 sides with a single film reel Bsdpfx Ajzhwfkoprjwp Motorized rotary table Patented triangular arm with mobile linkage Motorized pre-stretch module Film width: 1,000 mm Adjustable pre-stretch: 0 to 350% Reel capacity up to 100 kg Automatic cutting and heat-sealing device Pleated film reinforcing load cohesion Anti-fall system for the stretching carriage Touchscreen operator interface Frequency inverters Programmable industrial controller Adaptation to different pallet sizes Simplified maintenance thanks to optimized kinematics

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Manufacturer: JBT - Stein Model: JSO-IV-40-22TF Year: 2006 Condition: Used Serial Number: 0372PO183 Stock Number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal fluid, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated Clean In Place (CIP) Continuous hot water, single pass, belt washer Bwodey Icgiepfx Aprjp With Stein Humitroll moisture monitor and control

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Bjdpfoxfwdsx Aprjwp Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear