Used Moisture for sale (281)

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 1412016.02, SRU 1200x5000-EG-A-UK Vibratory Conveyor Trough 1200 x 5000 mm Original purchase price: €81,600 Negotiable Kwjdpfxsxy Rqde Ahzjt Original invoice available Conveyed material: Metal mix, steel scrap Capacity: approx. 15 t/h Bulk density: 0.5 – 0.6 t/m³ Grain size: typically approx. 0 – 300 mm (~90%), max. 850 mm diagonal dimension Moisture: dry, free-flowing and easy to convey, not cohesive Temperature: cold Application: Feeding material onto the vibratory trough Trough width: 1200 mm Trough length: 5000 mm Trough height: 250 mm Inclination: horizontal Mounting: on hollow rubber springs Vibration-resistant steel construction, consisting of: the trough body, 6 mm thick, grade R St 37-2 with reinforcements bolted exciter console, stress-relieved annealed and machined bolted special discharge with flanged collar incl. 2 outlets approx. 600 mm wide the bolted wear liners for base and sides, 8 or 6 mm thick, made from wear-resistant special steel (e.g., Hardox 450 or similar) two steps: 1st step approx. 400 mm high after approx. 1,500 mm of conveying length; 2nd step approx. 200 mm high after an additional approx. 1,250 mm of conveying length acceleration sensor hollow rubber springs supporting structure for a trough bottom height of approx. 1,800 mm Drive: 2 vibration motors, 400 V, 50 Hz, IP 65, rated power approx. 2 x 7.5 kW = approx. 15.0 kW at 960 rpm. The amplitude can be infinitely adjusted when at a standstill. Equipped with PTC thermistors for temperature monitoring in frequency inverter operation Drive arrangement: underneath, within horizontal profile Permissible ambient temperature: -20 to +40°C This vibratory conveyor trough is used and sold in its current condition, with any and all warranties excluded. The buyer has had the opportunity to inspect the item thoroughly.

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. Kjdpekw Ukuefx Ahzewt •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. Kwodpfx Ajmt Dcfohzet 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Year of construction: 2025, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: Kedpfx Ajmt Dcqjhzowt 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 95 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2025, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Kjdpfx Ahsxnk Acszswt Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2025, Electric Pallet Truck 1500 kg – A Modern Solution for Internal Transport The CORMAK electric pallet truck, also known as an electric pallet jack, powered warehouse trolley, or electric pallet mover, is an essential device in any warehouse, store, wholesale outlet, or production facility. This model, with a 1500 kg load capacity, combines compact dimensions with high power and efficiency, ensuring fast and safe pallet transport over short and medium distances. With both electric drive and lifting, this pallet truck eliminates the need for manual pumping and pushing, significantly improving workplace ergonomics. It is ideal for environments where precision, quiet operation, and maximum productivity are essential. Modern 24V 20Ah Lithium-Ion Battery The 24V 20Ah lithium-ion battery offers long service life, short charging time, and requires no maintenance. Unlike traditional lead-acid batteries, Li-Ion cells allow for quick recharging at any time of day without the risk of shortening battery lifespan. As a result, the truck is always ready to work. The side-mounted battery further enhances the unit’s durability. This design effectively protects the battery from moisture, dust, and weather conditions, which is especially important when working in cold storage, loading docks, or open warehouse areas. The fully metal construction ensures exceptional resistance to mechanical damage. Its robust steel frame makes it perfect for tough working conditions – on construction sites, in workshops, or industrial plants where durability and safety are key. Key Features of the Pallet Truck Electric drive and lifting – minimal operator effort 1500 kg load capacity – ideal for most standard pallets 24V 20Ah lithium-ion battery – fast charging, long-lasting operation Side battery installation – better protection and easier maintenance All-metal construction – durability in harsh environments Compact and maneuverable design – excellent handling in narrow aisles Low noise and zero emissions – eco-friendly alternative to combustion-powered models Electric Pallet Jack for Warehouses, Stores, and Production Facilities This 1500 kg electric pallet jack is the perfect balance of performance and reliability. It’s ideal wherever work efficiency and operator safety are priorities. Whether you're looking for an electric-powered pallet truck, a warehouse trolley with drive, or an automatic pallet mover, this model offers maximum ease of use and low operating costs. Technical Specifications Specification Value Model Q15-4 Kodpfxexphq Hj Ahzowt Load capacity 1500 kg Fork height (raised) 200 mm Fork height (lowered) 85 mm Overall length 1670 mm Fork length 1150 mm Width 560 mm Minimum aisle width 1920 mm Turning radius 1480 mm Driving speed (with/without load) 3.8 / 4.2 km/h Max gradeability (with/without load) 2 / 6 % Drive motor power 0.75 kW Battery 24 V / 20 Ah Net weight 131 kg

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g Kwedpfx Aomt Dbhehzot The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Set Including LUFT 1500 COMPACT Screw Compressor with VSD Inverter and N10S Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest innovations in pneumatic systems, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction, and high performance guarantee efficient and trouble-free operation. Additional Dual Filtration at the Dryer Included! Key Features Innovative Design Our screw compressors are based on advanced engineering and European manufacturing precision. The robust construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Efficiency Optimization Thanks to variable speed drive (VSD) technology and intelligent algorithms, the CORMAK LUFT 1500 COMPACT screw compressor dynamically adjusts energy consumption to the current demand for compressed air. This results in significantly lower operational costs while maintaining maximum performance. Integrated Refrigeration Dryer The COMPACT version with a built-in refrigeration dryer provides a space-saving and comprehensive solution in a single device. The integrated dryer ensures dry and clean compressed air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our screw compressors operate at exceptionally low noise levels. Effective noise reduction and vibration damping systems ensure a comfortable working environment, improving operator focus and overall workplace comfort. Smart Control The intuitive MAM electronic control panel is the command center of your compressor. It allows precise parameter monitoring, maintenance scheduling, and quick diagnostics—ensuring system stability and protecting key components. Adaptability to Your Needs We understand that each application is unique. CORMAK screw compressors can be configured with additional air treatment systems, allowing for perfect alignment with your industry's specific requirements. Dynamic Working Pressure Automatic pressure regulation ensures the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We are committed to environmentally friendly solutions. The energy-efficient technologies used in our compressors not only reduce your electricity bills but also limit environmental impact. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects your pneumatic installation. Variable-Speed Fan Automatically adjusts cooling performance to working conditions, improving energy savings. Dual Filtration System Pre-filter with 3.0 µm precision removes larger solid contaminants. Fine filter with 0.1 µm precision captures oil aerosols and other small particles, delivering ultra-clean air. Technical Specifications Specification Value Motor Power 11 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 1620 L/min Air Delivery at 6 bar 1580 L/min Air Delivery at 8 bar 1350 L/min Air Delivery at 10 bar 1230 L/min Kedpfx Ajxmg Npohzjwt Outlet Connection Diameter (G) 1" Dimensions (L x W x H) 1550 x 740 x 1150 mm Weight 500 kg

Condition: new, Year of construction: 2025, 10-Ton Screw Jack The 10-ton screw jack is an exceptionally durable mechanical device designed for lifting heavy structures, machinery, and vehicles. Made from damage-resistant steel, it ensures safety, stability, and long service life even in the most demanding working conditions. Ideal for railway, construction, and industrial applications. Advantages of the 10-Ton Screw Jack: ✅ Load capacity of 10,000 kg – perfect for handling heavy machines, structures, and vehicles. ✅ Mechanical design – operates without any power source, ready for use anywhere. ✅ High safety level thanks to the ratchet locking system. ✅ Precise height adjustment allows accurate positioning of the load. ✅ High resistance to external factors – moisture, dust, vibrations, and low temperatures. ✅ Easy to transport – compact dimensions and ergonomic design. ✅ Versatile applications across multiple industries. Technical Specifications – Model MJ10 Parameter Value Rated lifting capacity 10,000 kg Head width 120 mm Base width 140 (210) mm Overall height 795–1155 mm Lifting range (foot) 70–430 (30–390) mm Foot length 80 (75) mm Body thickness 73 mm Base length 175 (170) mm Gear height 330 mm Body width 252 mm Gear axis distance 185 mm Support length 220 (280) mm Side housing length 250 mm Net weight 45 kg Kwsdpfxexqxwms Ahzjt

Condition: new, Year of construction: 2025, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Kjdjxmg A Aopfx Ahzewt Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2025, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Kjdpfxev Axzmo Ahzewt Technical data: Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Manufacturer: Cormak

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 500/30, type of input current: three-phase, overall weight: 2,400 kg, power: 64 kW (87.02 HP), We offer a complete solution for recycling waste materials/by-products with our APM/500/30 Compact pellet line. With this, you can convert waste materials into various usable products, such as: fire pellets, feed pellets, poultry litter, manure pellets. etc. We have more than 20 years of experience in this industry. This machine is a mature technology that allows you to work quickly and efficiently, we produce all its parts ourselves and the supply of parts is continuous. We are a European Union company. We have production lines in Canada, the Netherlands, Belgium, Poland, Hungary, Slovakia, Romania. We can manufacture machines according to all relevant CE, UL, CLA standards, upon request We have resellers in Canada and Belgium For production, you can use, for example, sawdust, alfalfa, straw, sunflower seed hay, etc. The maximum moisture content of the raw material for pellet production is 15% The advertised APM 500/30 compact pellet line includes the following units and can produce 0.5 T/h pellets: 1. Hammer mill 2. Conditioner, Kwedpfxeht U Hxs Ahzot 3. Pellet press, 4. Pellet cooler, 5. Big-bag packaging unit 6. Automatic control cabinet 7. Conveyor belts. The price is 68,000 euros We also have 1 ton/h pellet lines for 123,000 euros called APM 500/30 Compact Tandem, and the APM 500/30 Compact can also be expanded later on if needed The pellet line is ready for use within 2-3 hours after delivery! If you are interested in the equipment, write an e-mail or call us

Condition: new, Receiver capacity 2 x 37 l Kwodpfefv Au Ajx Ahzet working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN Kedpfxexzurhj Ahzswt 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: new, -New/One Way -available immediately -The price is from the Duisburg depot (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our new 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance Kodpfx Ahevx U U Iezjwt - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: used, -Used -Wind and waterproof Kjdpfx Ahsvyabvszswt -available immediately -The price is ex-depot Duisburg (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: Kwodpfx Ahsxv R Rcozet -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 12 months, input voltage: 400 V, The dryers of the BD 360+ to 1260+ series are heat-regenerated adsorption dryers that remove moisture from compressed air through an adsorption process. All dryers in this series are equipped as standard with an innovative Smart Cycle control algorithm, which leads to significant energy savings during partial load operation without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with generously sized vessels and piping to minimize pressure drop within the dryer. The dryer can deliver dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured, including the following special equipment: Kjdpfx Ast It N Sshzowt - Pressure dew point sensor - Vessel insulation - Blower filter Brand new with 12-month warranty from date of delivery. Optional installation and commissioning at a very competitive price is available from stock in Wettenberg.

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from 2 manufacturers - D.H.T. van den Dikkenberg and BTH (Premier Tech). All dairy powder and powders of plant origin can be used, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour etc. The number of blended ingredients is unlimited. The line is suitable for both - food and feed - purposes and has a producing capacity of 3mt per hour. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture, are corrosion-resistant and safe to use; - all surfaces are resistant to repeated exposure to cleaning/disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this wouldn't create conditions for contamination of the manufactured products; - is mounted in two 40 foot containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. After that, the raw materials are sifted through a second sieve with eyes of 0,2 mm. In this way, all foreign particles over 0,2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are bags of 20-25 kg net. 4) suction of excess air Kedpfxjwhf Ddo Ahzjwt An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags on the pallets, the entire structure becomes more stable. This is very important for the safety of the cargo during transportation. 5) heat-sealing of the inner poly liner The line is equipped with a heat-sealing unit (BTH BV), which is used to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing of paper bags with/without crepe paper The line also has an integrated sewing unit (sewing head - Fischbein SA) for closing of the paper bags (type - open mouth). For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1mt each: 1) raw material blending bunker 2) product settling bunker after blending 3) finished product bunker The line has a high production efficiency and very easy maintaining and operation.

Condition: used, mileage: 200 km, power: 345 kW (469.07 HP), first registration: 06/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 2 395---- Volvo FH 460 6x2-4 flatbed truck with FASSI F235 crane. Fassi F235 Crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double linkage system with PROLINK (bendable boom arm up to 15°) * Electronic overload cutoff with FX500 * Fassi RCS Maxi radio remote – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (at 90% and 100%), including adjustable digital slewing limiter * FASSI Stability Control FSC including LMB II * Control system for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extensions in stock Volvo FH 460 6x2-4 * Modern construction material pallet flatbed * Flatbed dimensions (L x W x H): 6,600 x 2,480 x 1,000 mm * Side panels: each side split once (2 drop-sides) per side with side panel release * Subframe: In combination with reduced crossbeam spacing and the externally perforated frame (drilled at 45°), a 30 mm thick phenolic resin plywood base plate is mounted to achieve high structural stability and high point load resistance. The subframe is manufactured as a steel-welded construction. * FH Globetrotter safety driver cab * Long-haul version with lower bunk * Engine: 13 l, 469 HP / 345 kW, 2,346 Nm, Euro 6 Step E * 12-speed I-Shift automatic transmission * I-Shift driving modes: Standard, Performance and Economy * VEB+ Volvo Engine Brake * Suspension: leaf/air * Trailing axle: electrohydraulically steered and liftable * Tyres: FA + TA 385/65 R 22.5, drive axle 315/80 R 22.5 * Wheelbase: 4,900 mm * Trailer coupling ROCKINGER 400 G 150 * Active Safety Package: ACC adaptive cruise control, driver alert system, lane change assist, lane keeping system * LED main headlights * LED rear lights * Driver’s comfort seat, air-suspended, heated, integrated belt * Automatic climate control * Auxiliary heater Ksdpjxnn Ehjfx Ahzowt * Cool box with freezer compartment, 33 l * High instrumentation with digital, fully dynamic driver information display (4 view options) Traffic sign recognition (in conjunction with LSS-DW lane keeping system) Size: 12” with chrome trim Second driver info display: 9” color touchscreen * ...and much more. Superstructure: Flatbed – dimensions 6,600 x 2,480 x 1,000 mm, side panels split once (2 drop-sides) per side with side panel release. The standard floor plate is made of 30 mm thick, bonded Finnish multiplex plywood, bolted to the externally perforated frame and cross beams at 45°. The edges are sealed against moisture ingress. * Lashing rail recessed centrally in the direction of travel * 4 work lights * Toolbox Financing, leasing, or hire-purchase is available. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 5-073----! ! ! AVAILABLE IMMEDIATELY ! ! ! MAN TGS 26.480 BUILDING MATERIAL TRUCK WITH REAR-MOUNTED LOADER CRANE BY FASSI OR PALFINGER Optionally also available with 520 HP in stock! Vehicle: Flatbed with crane * MAN 02676 LFAI diesel engine, 480 HP output, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with Retarder 35 * Eco retarder, speed-dependent, adjustable, energy-efficient * MAN EVBec high-performance engine brake, adjustable * 6x2-4 drive * Leaf/air suspension (BL) * 4,800 mm main wheelbase, 1,350 mm wheelbase between rear and trailing axle * 590 l fuel tank, 60 l AdBlue tank * Steerable and liftable trailing axle * RINGFEDER Type 4040/G150B trailer coupling * NN cab: practical (narrow, medium-length, normal height) * Refrigerator * Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment * Electrically operated glass sunroof * Electric sunblind for front windscreen, internal * LED lighting * MAN EasyControl control panel, 2 functions, operable from the outside when door is open Kodpfx Ahjxnnziezswt * MAN Media System Navigation Advanced 7-inch * MAN Sound System Advanced * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct-entry buttons * Lane departure warning system (LDW) * MAN AttentionGuard fatigue warning system * Emergency braking assistant (EBA) * Standard driveline warranty extension for third operating year up to 450,000 km; see maintenance log for conditions * ... and much more Body: Flatbed: Dimensions 6600x2480x1000 mm, drop sides split 1x (2 flaps) per side, with drop side relief * The floor plate is standard made from bonded Finnish multiplex 30 mm thick and screwed to the 45° perforated outer frame and cross members. The edges are sealed to prevent moisture ingress. * Central lashing rail recessed in longitudinal direction * 4 work spotlights * Toolbox PK 22002-EH ? PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED LOADER CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil passage - Double knuckle boom with Power Link Plus 15° - Slewing mechanism with slewing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves on the support cylinders - Spiral hose from base frame to main boom - Spirit level at both control stations - Available from stock with 4 and 6 extensions or Fassi F235 loader crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg, or at 17.1 m: 740 kg * Slewing range 400° * Double knuckle boom system with PROLINK (overextendable knuckle by up to 15°) * Electronic overload cut-off device with FX500 * Fassi RCS maxi radio remote – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (at 90% and 100%), incl. adjustable digital slewing limitation * FASSI stability control FSC incl. LMB II * Control system for 2 additional functions with 2 hose guides / e-dynamic * Available from stock with 4 and 6 extensions Financing / hire-purchase as well as leasing / partial amortization leasing is available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Year of construction: 2019, condition: good (used), functionality: fully functional, Venom Standard V8 Central, manual clamping device for bandsaw blades Grinding wheel is directly driven, reducing vibrations and enabling very high material removal rates Large-diameter grinding wheel V8 = 300 mm for increased profile durability of the grinding wheel Electric feed adjustment for tooth face and tooth back via touch panel Integrated grinding wheel dressing device Frequency inverter for stepless feed speed adjustment Available for gang or circular saw blades Frequency inverter for stepless grinding wheel speed adjustment Swivel arm Kwjdpjxqrtbsfx Ahzjt Technical details: Tooth profiles: PCB Blade width Bandsaws: 32 mm to 380 mm Blade thickness: 0.4 – 6.0 mm Adjustable pitch: 14 – 60 mm Adjustable tooth height: 5 – 30 mm Rake angle: 0° – 40° Working speed: 0 – 30 teeth/min Grinding wheel diameter: V8 = 300 mm Grinding wheel thickness: 6 – 20 mm Grinding wheel drive: 3.2-4.0 kW electric motor Water pump: 120–350 l/min Grinding wheel is directly driven, reducing vibration and allowing for very substantial material removal Grinding wheel with large diameter (300 mm) for enhanced grinding wheel profile stability All mechanical guides are located at the rear of the machine to protect them from moisture Electric feed adjustment for tooth face and tooth back via touch panel Built-in grinding wheel dressing device

Condition: used, -Used -Wind and waterproof -available immediately -The price is ex depot Hamburg (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences Kwjdovyab Njpfx Ahzjt - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Kwodpfxjv Sqrpo Ahzst Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Basic machine from €24,990 net Well suited for shredding: - Paper, cardboard boxes, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - special rotor with embedded blades (reduced load capacity), - small cutting gap between blade and counter blade Kwedpfxed H R Sxe Ahzet Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Top cutting unit opening 600 x 800 mm The parts should be a maximum of approx. 500x500 mm in size *the height is less important hydraulically operated slide, sieve hole of your choice (25 - 40mm) For plastics, coarser sieves are recommended (30-40 mm) *If you want to shred more finely, a two-stage shredding process is recommended with downstream granulator type MVZ (sieves 5-15 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Other options available for an additional charge: - Raise the shredder by approx. 25 cm (Preparation for conveyor belt removal) + €995 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,490 net - Overband magnet + €6,750 net - Control of conveyor belt and overband magnet + €2,495 net (Start and stop synchronized with the chipper) - Alternatively, manual start and stop on the conveyor belt + €497.50 net . Requirements for the raw material: - The moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. . We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos. --- *only for brittle plastics with a medium degree of hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optional would be the next larger machines Basic machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening at the top 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on the effort Basic machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening at the top 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on the effort Basic machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening at the top 1,300 x 1,200 mm The Parts should be a maximum of approx. 1,200x700 mm in size *the height is less relevant from €79,975 net * Options depending on effort