Used Nikmann Maschine for sale (1,436)

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Guedpfx Ajfifa Aef Tea Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Gsdjgu N E Djpfx Af Toua Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Condition: used, Year of construction: 2006, functionality: fully functional, Emco machine package for sale! For sale: 2 lathes as a package including ALL tool holders and clamping equipment! 1 x Emco 665 MC Plus with counter spindle and 2 turrets, year of manufacture 2006, including 4 meter FMB Turbo 8-80 bar feeder, year 2006. Runs without issues. 1 x Emco 332 Big Bore with counter spindle and 2 turrets, year of manufacture 2001, including 3 meter FMB 5-55 Turbo bar feeder, year 2016. The 332 currently has a fault with the upper turret, specifically in engaging the driven tools (probably the clutch cup is defective). Estimated repair cost is around €5,000. Therefore, we have significantly reduced the price for this machine. Otherwise, this machine also runs without any issues! Both machines are in daily operation and available for inspection under power. The machines have been used in single-shift operation only. Since we are selling both lathes as a package due to a system changeover, a vast range of tool holders, clamping systems (for all machines), and feed technology for all loaders is included in the package. It’s simply too much to list everything here! Gsdpfx Afoyifnhs Tjua Dismantling and loading onto the customer’s truck can be organized at an additional low cost!

Condition: excellent (used), stable angle table, used Clamping surface 800 x 360 mm Gusdpfxoywtdqj Af Toa 5 T-slots Distance = 65 mm

Condition: ready for operation (used), functionality: fully functional, stroke length: 250 mm, throat depth: 315 mm, bending force (max.): 200 t, distance between stands: 3,650 mm, working length: 4,050 mm, The machine's control unit has been renewed! TECHNICAL DETAILS Pressing force: 200 t Bending length: 4,050 mm Frame width: 3,650 mm Stroke: 250 mm Throat depth: 315 mm Maximum tool width: 100 mm Table width: 190 mm Table height above floor: 800 mm Rapid traverse: 100 mm/s Working speed: 8 mm/s Return speed: 75 mm/s Gsdpfx Aoyg Dtmjf Teua MACHINE DETAILS Control system: CYBELEC CybTouch 12 Total power requirement: 18.5 kW Current consumption: 25 A Protection: 50 A Tank capacity: 240 l Dimensions & Weight Space requirement: approx. 4.4 x 1.8 x 3.0 m Machine weight: approx. 17 t EQUIPMENT Swiveling operator panel, front right CNC electric backgauge (X axis) CNC electric depth adjustment (Y1 + Y2 axis) 4x manually adjustable, flip-up backgauge fingers Manually adjustable table crowning, via hand crank Rear and side safety guards 3x front support arms Free-moving double foot switch Universal die block

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control Gujdpfxovygwwo Af Toa tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm Gsdpfx Afeyhaxno Toua -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: Maschinen-Nr. F4UT3901, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,120 mm, total width: 2,115 mm, total length: 2,220 mm, table width: 500 mm, table length: 900 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, overall weight: 2,550 kg, Equipment: documentation/manual, For sale is an EMCO FB-6 milling machine. Accessories include: 2 hydraulic machine vises, a mobile sliding door cabinet for milling tools including 17 milling tool holders, a tool drawer cabinet with approximately 150 different milling cutters, and a wing door cabinet with various milling cutters. Take the opportunity to inspect the machine under power on-site and see its condition for yourself. Gjdpsyka Rcjfx Af Tjua

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Gsdpfx Ajyuvc Aef Teua

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small goods conveyor belt MK MASCHINENBAU Type 2400 x 85 Year of manufacture: approx. 2010 Usable length: 2400 mm Belt length: approx. 5100 mm Belt width: 85 mm Frame profile height: 50 mm Return roller diameter: 30 mm Belt speed: 6.5 m/min. Motor power: 0.18 kW Guedpfxextq D Re Af Toa Main connection: 400 Volt, 50 Hz - Drive via ATB geared motor - Belt body made from aluminium system profile with approx. 7 mm profile groove, suitable for standard T-nuts Overall dimensions L x W x H: 2420 x 180 x 300 mm Weight: 21 kg Good condition

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curve conveyor / board or model separation, robust design, conveying height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller track. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW gear motor with brake. Conveyor is split and bolted for transport. Disassembled and loaded free onto truck. Ideal for use upstream of a double edger or stacking system. Gusdpfxsxl Edio Af Tsa

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Guedsyupynopfx Af Tea

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm Guedpfx Aeu Rpibsf Toa - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg Guodpfx Afephun Ej Tja

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: Gujdjyyavrepfx Af Tsa - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TET121P3-20-FSH - 2200429608, cooling capacity: 35 kW (47.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 661 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 5.96 m³/h, pump pressure: 2.67 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process air cooler / Chiller / Air-cooled water chiller Type: TAEevo Tech 121P3-20-FSH Manufacturer: MTA S.p.A. The TAEevo Tech 121P3-20-FSH is an air-cooled compact water chiller suitable for outdoor installation (ambient temperature range: -20°C to +46°C). Features include crankcase heater, phase monitoring, 255 l buffer tank, integrated P3 circulation pump, electric frost protection, and condenser pressure control (Winter package -20°C). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 35 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 5.96 Available pump pressure (bar): 2.67 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Gujdexxhl Aopfx Af Toa Voltage: 400 V Frequency: 50 Hz Phases: 3 Ph Max. power consumption (kW): 19 Max. current (A): 33 Starting current (A): 165 Protection class: IP54 Dimensions: Length (mm): 1862 Width (mm): 761 Height (mm): 1437 Weight (kg): 661 Connection: Rp 1 1/2" Serial no.: 2200429608 Year of manufacture: 2025 Condition: Visual grade 1, technically okay Stock machine, as new Price: on request in Euro (plus VAT, ex works Nettetal) – 12-month warranty (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. Guedpfxexrknmj Af Tja OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: used, static maximum load 4,000 kg diameter 160 mm height 35 mm thread M 16 x 1.5 levelling height 20 mm weight 2.2 kg - 95 units on stock - new - price per unit Gusdpfxofii Die Af Toa  

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Guodpfx Afoxb Ucaj Tja Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: new, Year of construction: 2024, working width: 1,500 mm, sheet thickness steel (max.): 20 mm, Hydraulic guillotine shear – built-to-order machine (delivery time approx. 10–14 weeks) – including foot switch, touchscreen, rear installation area with light barrier monitoring, automatic/electric cutting gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth Gedpfeynatlox Af Tsua - Images similar -

Condition: good (used), Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Description: Hydraulic folding machine – including hydraulic dynamic crowning, touchscreen, upper beam pressure regulation, backgauge (1000 mm), gooseneck tools with automatic tool clamping, electric/hydraulic adjustment of the bending beam Gusdpfxsynar Us Af Toa - Images are similar -

Condition: good (used), Year of construction: 2018, working width: 3,200 mm, sheet thickness (max.): 4 mm, Hydraulic swing bending machine, incl. increased stroke of the upper beam 450 mm, swiveling upper beam, hydraulic dynamic crowning, touchscreen, pressure regulation of the upper beam, motorised rear stop (1000 mm), electric/hydraulic adjustment of the bending beam Gsdoym U S Tepfx Af Tjua - Illustrations similar -

Condition: new, Year of construction: 2024, working width: 3,200 mm, sheet thickness (max.): 6 mm, Hydraulic swing bending machine, hydraulically dynamic crowning, touchscreen, pressure regulation of the upper beam, motorized backgauge (1000 mm), electric/hydraulic adjustment of the bending beam - Images are for illustration purposes only - Gusdpfx Afoym U Nfe Toa

Condition: new, Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Hydraulic guillotine shear – made to order (delivery time approx. 10–14 weeks) – includes foot pedal, touchscreen, rear operating area with light curtain monitoring, automatic/electric blade gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth Guedpfeym Uv Eox Af Tja -Images similar-

Condition: used, 50 pieces used Gedpfx Afeyu Ruge Teua SK 40 holders