Used Nitrogen for sale (315)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor Hjdpfeg Iihwsx Ahzjnk y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote Hsdpfxow H Dvpe Ahzonk - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW] Hnedpfxeu E U Tbo Ahzsk

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis Hedsvgrl Hepfx Ahzsnk -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Stevinweg 11 B 7741KT Coevorden Holland

Condition: new, Year of construction: 2025, Description AORE PG6020: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 6050 mm table width 2050 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 12 overall dimensions 14.000 x 3.400 x 2.400 mm weight of the machine ca. 13.450 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 40 mm - stainless steel 30 mm Hnodpfsiyun Rox Ahzjk - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 6000 mm - Y-axis travel 2000 mm - Z-axis travel 375 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (23 second max for changing) - automatic change, max load on tables 2.400 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Hnjdpfx Aex H R Ryshzsk Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Hodjhwaapjpfx Ahzenk Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Hsdshwaa Espfx Ahzenk Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA Hnjdpfeyabxyjx Ahzsk comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar Hnedev Sbc Espfx Ahzsk oxygen: inlet pressure min. 3 bar

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h Hnodsfc Hbdjpfx Ahzsk clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Year of construction: 1985, condition: used, For sale Hnjdpfx Ajyqyf Hshzek Batch annealing furnace – completely customs refurbished in 2010. With 2 furnace lids made of stainless steel – new ( 2020 and 2025). Original manufacturer : LEE WILSON ENGINEERING Company. CLEVELAND OHIO 3m diameter x 3 m height size of charge Protection Gas: HNX (Nitrogen-Hydrogen) -Pression in cover :8 mbar. Fan rotation:750r/min. Cooling: Air jet cooler (Max 60°c/hour depending on the charge) The atmosphere can be changed, currently at 95/5% H N. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Power 5,5 KW Receiver 50 L weight of the machine ca. 0,450 t dimensions of the machine ca. . m feed pressure 330 bar liter capacity . l Hedpfxjyqvz Dj Ahzonk Medium: Nitrogen N2 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2005, condition: good (used), Basic configuration Oven type: Reflow soldering oven with full convection heating Heating zones: 3 zones (convection) Cooling zone: 1 zone (active air cooling) Hsdpfxsyl Uvvs Ahzjnk PCB handling: Mesh belt or optional pin (chain) conveyor PCB transport direction: Left → right Dimensions (L × W × H): approx. 2000 × 710 × 1200 mm Weight: approx. 237 kg Controller: Microprocessor (LCD, languages incl. English/German/French) Program capacity: 49 profiles (fixed + freely programmable) Temperature setting: °C / °F Temperature range: approx. 20°C – 300°C per zone Max. reflow width: 10 – 300 mm Conveyor speed: 100 – 800 mm/min (with optional slow-speed module) Transport repeatability: ± 2 mm/min Full convection air circulation: Total heating air: 1200 m³/h Per zone: 400 m³/h Cooling zone: 300 m³/h Atmosphere: air (standard), optional N₂ model available Power requirement (EU): 3×400 VAC, 50 Hz, ~25 A Power requirement (US): 3×208 VAC, 60 Hz Continuous power: ± 6.1 kW Start-up/warm-up power: ± 10 kW during initial warm-up Min. exhaust: approx. 2×250 m³/h recommended 📊 Other details Exhaust: 2 ports (80 mm), temperature < 55°C Sound level: max. 70 dB(A) Safety certifications: CE, EN954-1 Class 3 Features: emergency stop, overheat protection ✔ Reflow soldering of SMT printed circuit boards (Pb-free and standard) ✔ Continuous production and small to medium batch sizes ✔ Prototyping and R&D applications ✔ Optional air or nitrogen operation (depending on model)

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Hjdpfxjyhfg De Ahzenk Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: as good as new (ex-display), functionality: fully functional, power: 19 kW (25.83 HP), fuel type: diesel, fuel tank capacity: 20 l, color: orange, overall weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, first registration: 06/2024, next inspection (TÜV): 06/2024, Year of construction: 2024, Equipment: rubber tracks, We are offering this display unit Bipromasz Kafar KB-2G pile driver, year of manufacture 2024. Manufacturer: Bipromasz Model: Kafar KB-2G Year of Manufacture: 2024 Condition: Display machine Type ID: 6/2024 Operating hours: 7 h Machine type: Pile driver, suitable for solar park construction, guardrail installation, fencing, foundation and piling works Hnjdpfxsyttqno Ahzok Designed for profiles / piles up to 5 m length Standard equipment: - 2 anvils - Mast tilt control / inclinometer for precise vertical alignment - Crawler undercarriage Additional equipment (already installed): - Automatic mast plumb adjustment - Nitrogen hammer charging system Scope of delivery also includes: - Maintenance tools / basic equipment Optional accessories: A suitable transport trailer can be supplied on request. EU-wide sale possible. Intra-community delivery available. Location: Near Frankfurt am Main (Germany) Inspection by appointment. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of manufacture: 2005 Condition: Very good, fully functional Location: Germany Availability: Immediately available Machine Description Hjdpfxeynn A Ie Ahzenk For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The system is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Including dosing system • Packaging from roll stock • Compact monoblock design • Industrial-grade, "Made in Italy" This machine is ideal for freshly roasted coffee and guarantees optimal aroma preservation and extended shelf life through the combination of vacuum, inert gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft-gas-pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from roll stock • Year: 2005 Scope of Delivery • OPEM Arabella main machine • Dosing system • Gas flushing unit • Valve application system • Control cabinet / electrics Spare parts available

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Hnedsxzh Shopfx Ahzok Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Hedpfoyubphex Ahzonk Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Condition: new, Year of construction: 2025, The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles. The machine frame can be equipped with a wide range of jaw plates and machine bed lengths. The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head. Hjdpjvvh Ngofx Ahzonk With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Power: Up to 6,000 watts - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: up to 15200 mm - Maximum profile weight: depending on the jaw plates and length of the machine bed - Tube cutting capacity: Ø 8-350 mm - Tube cutting capacity: 8x8 - 350x350 mm - Chuck rotation speed: Depending on the jaw plates - Axes speed: Depending on the jaw plates - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 70 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Laser source: Max Photonics or IPG - Cutting head: Depending on power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: excellent (used), Year of construction: 1996, CRYOLOR gas tank semi trailer for oxygen, nitrogen, argon cryogenic Year: 1996 We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane Hnedpfx Ahju Uni Sjzsk We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Hnsdpfx Ajyvrl Rehzsk Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Hodpsyvrlksfx Ahzonk Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Hjdoyvrk Tspfx Ahzenk Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle Control: SELOGICA - touchscreen Hnodpfx Aoyvrktjhzjk Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Hot runner control x 12 Injection unit hardened - bimetallic Main machine motor - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine with compressed nitrogen cylinder/battery (additional charge for high-speed operation) Central lubrication Parallel movements Arburg Multilift Select 6 kg traverse robot Year of manufacture: 03/2011 4-axis robot: 3 axes driven by servo motors (electric); C axis - pneumatic Travel ranges on axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt and safety housing Purchase of robot and conveyor belt possible at extra cost Dimensions: Weight: 8700 kg Length/width/height: 5.58x1.71x2.21 m All offered machines are started up and checked by our service engineers before sale. A video of the technical inspections of the selected machine is available on request, or you can attend live technical tests at our facility in Łódź. Price: On request