Used Notcher for sale (71)

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also Iiedpfxoxaards Ag Uoc equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm Iiedpfx Agodf U S Ao Uec -Weight: 150 kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down Isdpfx Agjx Symns Uoic - tool package Validity of safety inspection until Feb. 2026

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t Iedpfxjyh Rnke Ag Ujic dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Iijdpfxow Im Shs Ag Uec With pipe notcher on the bar shear Foot switch for stroke activation Support table on the punching side Quick change device Range of tools is included in the price

Condition: used, Year of construction: 2003, round bar steel 30 mm square edge steel 25 mm L-beam 80 x 80 x 8 mm 200 x 13 / 350 x 6 mm 40 t throat 175 mm work stroke 32 mm work height max. 980 mm hole diameter in sheet thickness 20 x 15 / 38 x 8 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t Dimensions (LxWxH) 1,0 x 0,8 x 1,3 0 Ijdpfx Agor Erwle Uoic Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Iodpfx Agov Skzks Ujic Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: used, Year of construction: 2003, round bar steel 32 mm square edge steel 30 mm L-beam 80 x 80 x 8 mm 80 x 13 mm 36 t throat 170 mm work stroke 28 mm work height max. 980 mm material thickness 28 x 13 mm hole diameter in sheet thickness 25x10 / 30x8 mm total power requirement kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 1,9 m Ijdporc In Aefx Ag Uoic Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch Isdpfxjx Hp Ahs Ag Ujic - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Iiedpfxsd Id Ubj Ag Usc Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Motor protection switch

Condition: new, Tubend TT 90 pipe grinding machine Tube grinding machine Incl. 10 pieces. Grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 sanding belts Iiedpfxst Sumae Ag Ujc Belt width 100 mm Belt length 1250 mm Pipe diameter 16.5 - 90 mm Angle adjustable from - to 0 - 65 degrees Supply voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 m Pipe clamping range 90 mm Documentation (English)

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table Iiodsra Avdepfx Ag Uoc - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop Iijdpsv I Sxvefx Ag Usc - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 80706, Offer 25496 Hydraulic Universal Two-Station Corner Notcher + Punching Machine Technical Data: Station 1: Notching Unit - Cutting length up to 220 mm - Cutting thickness – steel with 400 N/mm² tensile strength: 6 mm - Infinitely adjustable cutting angle by handwheel: 30° – 140° - Pneumatic clamping - Locking stops left & right - Table surface: 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Iiedpfxex I Nbgo Ag Uoc Station 2: Edge Bending Unit or Punching Station - Max. pressing force: 200 kN - Working speed: 0 to 10 mm/sec - Edge bending up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Required space approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Iijdpfx Aomb U Slsg Uoc Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Isdpsmidyiefx Ag Ueic Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm Iiodeh Uhb Sopfx Ag Ujc U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: excellent (used), Speed (rpm): 1400 Voltage: 3x400V-50 Hz Power (kW): 3 Wheel size, driving wheel (ø mm): 200x100x28 Abrasive belt (mm): 100x1600 Tube diameter (ø mm): 21-76 Extraction capacity (m³/h): 600 With extraction unit Length (mm): 1430 Width (mm): 810 Ijdpfx Aew Ew D Rsg Uoic Height (mm): 1350 Net weight (kg): 205 Tube Notcher with Motor Brake - SCANTOOL 100 RSX The Scantool 100 RSX is the ideal tube grinding machine for all types of tubes and profiles. It simplifies welding and delivers a superior finish. The Scantool 100 RSX has been designed with series production in mind, where precision and clean work are required. Typical applications include the manufacture of railings, frames, go-karts, roll cages, wheelchairs, ship fittings, handrails, gates, fences, furniture frames, and stainless steel tube and profile works for the food industry, among others. The Scantool 100 RSX grinds tubes and profiles made from any material in the range of Ø 21 to 76 mm. Built-in powerful extraction The Scantool 100 RSX features an integrated high-performance dust extraction unit that removes most of the grinding dust directly at the belt. For the best dust collection solution, the Scantool 100S can be installed directly behind the belt grinder. The Scantool Cyclone 100S is available as an optional accessory. Key advantages of the Scantool 100 RSX tube grinder: • The only tube notcher on the market where the grinding unit can be set to the desired grinding angle • Does not require lateral space when grinding long tubes • Any angle can be set quickly and easily—without the need for tools • Precision grinding of tubes and profiles at any angle • Perfect adjustment of the contact roller to the required diameter • High-quality and robust side guidance • Ideally suited for series production. Original images coming soon.

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Iiedsium Stepfx Ag Uec Trade-in of used machines. Europe-wide delivery possible.

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Isdporxflcefx Ag Usic

Condition: new, pipe diameter: 10-114: (2x) 50 x 940grinding belt speed: 3-22 Iiedpfxjd Ab U De Ag Usc