Used Pmh for sale (33)

Condition: new, Year of construction: 2026, Our belt haul-off can be built in different sizes. 40-80 m/min Itodohd Ndxopfx Addob Contact length 170mm to 800mm MADE in GERMANY

Year of construction: 2026, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. the lenght of the granules is adjustable by means of the cutting speed. Itjdpfof Uc Ugex Addjb optionally, we offer a transport belt for cooling the granules.

Year of construction: 2026, condition: new, PMH Filament strand pelletizer, Type SG10 Itodpfx Adjkyt T Sedob compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion Iedpfsi Tu U Uox Addotb with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Itedpjiv H Eksfx Addjb Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2026, condition: new, Winder with traverse guide, for different bobbin sizes, traverse width and speed are adjustable, plug in and play Itodpodv N Egefx Addsb MADE in GERMANY

Year of construction: 2026, condition: new, Winder for spool´s up to 10kg gross weight with clamping conus and traverse guiding, adjustable speed and travelling width Itsdpfedlpyuox Addeb

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Isdpjby Rfpofx Addetb Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Itsdof Uc Urspfx Addeb

Year of construction: 2026, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide Iodpfx Adoch Sfqjdstb MADE in GERMANY

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Isdpfx Adoq R Tkwsdstb Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, Vollmer upsetting machine Type PMH 10 U with supporting blocks very good condition Itodoci Dfhepfx Addsb

Condition: excellent (used), Vollmer PMH gang saw swelling machine Saw blade width: 70-360 mm Saw blade thickness 0.7-3.5 mm Tooth pitch 20 to 100 mm Tine height from 8 mm Ijdpstp Sv Dofx Addetb

Year of construction: 1987, condition: used, Vollmer upsetting machine Type PMH 10 U Ijdpfx Aocbrq Teddotb with holder for band saw blades

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° Itjdpfx Aopfaxusddob POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø

Condition: new, functionality: fully functional, overall weight: 25 kg, operating pressure: 500 bar, protection type (IP code): IP55, rotational speed (max.): 4,300 rpm, Hydraulic motor PMH MCF55 Displacement cc/rev 55 Itedpfxev D Hwrj Addsb Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock

Condition: excellent (used), Complete Grinding Room for bandsaw blades Itodpfxokx E Sdj Addeb

Condition: used, Electric motor, E-motor VEM Three-phase motor, heavy current motor Model: IE3-W41R 250M 2 LL TPM HW Mounting: B3 Frame size: 250M Motor power: 55 kW Motor speed: 2970 rpm Current draw: 92 amps Mains connection: 400 volts, 50 Hz Shaft diameter: Ø 60 mm Shaft journal length: 155 mm Keyway width in shaft: 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Motor housing length without shaft: 780 mm Motor housing length with shaft: 930 mm Space requirement L x W x H: 730 x 400 x 520 mm Isdpjxuk Iljfx Addotb Net weight: 510 kg Good condition

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Itsdpfxjuxa Abe Addsb Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH 801-1-90-30 with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Itjdpew Np S Tofx Addob Fully functional

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Ijdjdm Aghepfx Addotb grooved feeding bush, screw with shearing and mixing element

Condition: good (used), used T-die 2250 mm, gap up to 1 mm Itjdpfxod Ha Icj Addeb auto-flex, cast film

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Iedpfx Asvtwzmsddjtb Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: good (used), Year of construction: 2013, functionality: fully functional, Used belt puller from the manufacturer Bellaform/Pütz TYPE: A400-40 year of construction 2013 Contact length: 400mm belt width: 40mm Speed: 386 m/min Itjdpfxouixhzo Addob

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder Itodpfxsua Ti Io Addob grooved feed