Used Portal Measurement Machine for sale (87,144)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Isdpfxoxcld Ds Adiea Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 300kg Tools Max weight 20kg Max tool diameter 400 mm Max tool length 400 mm Isdpfxjwvmuys Adioa Additional Equipment The machine includes monitor, computer and label printer. This HAIMER UNO 20|40 optical measurement machine was manufactured in 2019. It supports a maximum tool diameter and length of 400mm, with a tool weight capacity up to 20kg. The machine itself weighs 300kg. If you are looking to get high quality measurement capabilities consider the HAIMER UNO 20|40 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. Iodpfsthuzpex Adija good condition

Condition: new, Year of construction: 2023, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Heidenhain control Water-cooled inline motor 43 kW / 900 Nm Isdoqrq Emopfx Adisa Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Cable handwheel 2 x chip conveyor 60 tool changer

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Isdpfxsvvh R De Adioa Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Iodpfxotix S Ns Adiea Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Ijdpfx Adow Rl S Soija Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, Original purchase price of the machine: approx. €1,200,000 TECHNICAL SPECIFICATIONS Control system: CNC Fidia C20/6H-SB X-axis travel: 5,000 mm Y-axis travel: 2,500 mm Z-axis travel: 1,500 mm A-axis: ±110° C-axis: 360° (±182.5°) Spindle speed: 22,000 rpm Tool holder: HSK A63 Tool changer: 6-position (pick-up) Milling spindle power: 30 kW Iodpfx Adjwzkz Isioa Rapid traverse X/Y/Z: 20 m/min A/C-axis torque: 500 Nm A/C-axis speed: 20 rpm MACHINE DETAILS Total power: 90 kW Weight: 65 t EQUIPMENT - Control with HPX 20 hand-held unit - Coolant-lubricant system - Centralized lubrication for X, Y and Z axes - Hydraulic power unit HC22DT / 2.61-C5 - Enclosure and monitored loading doors - 14 used tool holders

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Iodofy U Ewjpfx Adija Plate is damaged on one side – see photo, otherwise in good condition

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. Ijdpfx Aohqhlvjdisa The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Isdjvvh T Sepfx Adisa Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: good (used), Year of construction: 2010, operating hours: 720 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  TECHNICAL DETAILS Travel path X: 2,000 mm Travel path Y: 3,000 mm Ijdpfx Ajvuzxlodija EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Iodpfx Adowqd Rheioa

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Four attachment heads Internal spindle cooling: Yes Iedpfxewx Nlts Adisa Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Ijdpfsw Au H Rex Adioa Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,551 h, functionality: fully functional, machine/vehicle number: 0345, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 60, Machine powered at least until June 5, 2025 No reserve price - guaranteed sale at the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,600 mm Z-axis travel: 1,000 mm Distance spindle nose to table: 150 – 1,150 mm Distance table to gantry: 2,800 mm Ijdpswm E S Sefx Adisa Control: HEIDENHAIN iTNC 640 Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load: 11,000 kg Spindle and feed rate Max. spindle speed: 4,500 rpm Tool holder: BT 50 Feed rate X/Y axes: 15 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 7 m/min Rapid traverse Y-axis: 7 m/min Z-axis rapid traverse: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Total length: 9,000 mm Total width: 8,000 mm Total height: 5,500 mm Power-on time: 11,498 h Program run: 5,585 h Spindle hours: 3,551 h Axis travel time: 3,945 h EQUIPMENT - 60-station tool changer including BT 50 tool holders - 4th axis from DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a portal machining center of the brand Deckel Mori and type 70 V The machining center is ready for immediate use and fully functional Technical data Year of construction: 1997 Control: Grundig Dialog 112 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm table: 900*550 mm max. load: 800 kg Feed speed x, y , z: 10 m/min rapid traverse x, y: 30 m/min rapid traverse Z: 20 m/min Spindle clamping: Hydraulic Mounting: SK 40 Max. speed: 15,000 1/min Tool magazine: 30 pcs max. tool Ø: 80 mm max. tool length: 300 mm max. tool weight: 12 kg Ijdev T U T Tepfx Adisa Tool changer: Vertical double gripper Tool measurement: Blum 3D probe: Renishaw OMP 60 Coolant system: IKZ Knoll RF 200/1100 F60-1 Space requirement: 3530*3300 mm Transport dimensions: 2.4*3.8*3 m (machine only) Weight: approx. 7,000 kg On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Ijdjvuztijpfx Adisa Y-travel: 2800 mm Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Extraction hood: rigid or height-adjustable EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal - Chip conveyor belt

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Iedpfx Asw Azu Iodija

Condition: like new (used), Year of construction: 2024, operating hours: 775 h, functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,200 mm, total height: 720 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 1,100 mm, workpiece weight (max.): 3,500 kg, grinding height: 720 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 5 m/min, grinding wheel diameter: 600 mm, distance table to spindle center: 1,050 mm, table length: 2,000 mm, table load: 4,000 kg, type of input current: three-phase, table width: 1,000 mm, grinding wheel width: 150 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 36,000 kg, grinding spindle motor power: 22 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,100 mm, warranty duration: 12 months, space requirement height: 4,550 mm, space requirement length: 7,850 mm, space requirement width: 4,840 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Gantry-style machine design for maximum accuracy  Sturdy cast iron construction of all machine components  Heavy machine weight for maximum rigidity  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensures excellent damping properties and high-quality grinding results.  Hydraulic table drive with separate cooling unit to achieve good surface finishes.  Electromechanical transverse and vertical movement.  Direct measuring system in the vertical axis (Heidenhain) for precise positioning.  Rotary pulse generator in the transverse axis.  Maintenance-free belt filter system with a 2000-liter tank capacity and a 10-bar pressure pump for effective cooling and rinsing.  Integrated channel rinsing.  Upstream magnetic separator for pre-filtration.  Power supply: 400 volts, 3 phases, 50 Hz.  Continuously variable grinding spindle motor with constant cutting speed across the entire working range of the grinding wheel (vconstant).  Roller-bearing grinding spindle guarantees a long service life.  Belt-driven grinding spindle.  2 machine lights in the work area. (LED)  Table-mounted dressing device for high accuracy and surface quality with the option of mounting three diamond dressing tools  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  No heating of the magnetic chuck, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z axes (grease)  Partially enclosed machine with sliding door and front-mounted service door; Open on the top left, closed on the top right with a 300 mm nozzle for extraction  Effective splash protection with good accessibility  Additional service door on the rear of the machine, including a second electronic handheld unit  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle Ø = 300 mm Ijdpfx Aswax U Tedija Standard accessories Consisting of:  Grinding wheel holder  Grinding wheel 500 x 100 x 203.20 mm  Complete documentation  CE declaration of conformity  Acceptance report according to DIN 8632  Leveling elements  Balancing mandrel  Rolling stand Special accessories:  Semi-automatic grinding wheel balancing system with GAP

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Isdpfx Adewywcijiea Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: used, Year of construction: 1987, functionality: fully functional, Angle milling head - Manufacturer: Waldrich Siegen - Model: ET500 Ijdpfxsrfw R Hj Adioa - Order no.: 11290/731

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Ijdpfovriq Rox Adisa

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment Ijdpfx Ajwwq Hcsdisa - 15-way tool changer - Control in a separate, rollable desk

Condition: ready for operation (used), Travel X/Y/Z: 10500mm/3500mm/2800mm, clearance width: 3515mm, max. clearance height: 2500mm, table dimensions X/Y: 13000mm/3000mm, speed: 700rpm, drive power (renewed in 2025): 110kW. Machine dimensions X/Y: approx. 28300mm/10200mm, control: Mitsubishi E300 1.1x, software update: planned for 2025. Includes belt grinding unit, chip conveyor, chip extraction, various cutter heads, tool holders, disc cutters and face milling heads, support blocks, clamping brackets, and currently dismantled counterweights. Documentation available. An on-site inspection is possible. Iedpfxjw Extto Adija