Used Pot Devin for sale (605)

Year of construction: 2013, condition: ready for operation (used), A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible. Ksdpfxjx A Hhke Addsdg

Condition: used, Year of construction: 1985, Make: Reis Type: TUS 160 OK 100 Year of manufacture: 1985 Control: Conventional Country of origin: Germany Delivery time: approx. 4 weeks Freight basis: ex stock Kodpfsgv Ikhjx Addodg Technical details Pressure 100 T column passage 1620 mm Table + ram 1800 x 1550 mm Open height 1800 mm Swivelling table load 6000 kg Table load top (without swivelling) 10.000 kg Table load bottom 20.000 kg Stroke 1500 mm Machine weight approx. (without operating materials) 22 T Dimensions L x W x H 5642x2940x5840 column diameter 180 mm Oil tank 400 L Additional information: Ejector in table

Condition: excellent (used), pneumatically operated, water-cooled spot welding gun Manufacturer: DALEX, Type 3328-4 with 5/2 solenoid valve – double-stroke cylinder, long stroke 60 mm, pre-stroke 40 mm Working stroke with adjustable range 0–20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 16.5 kA Secondary open-circuit voltage: 4.7 V Electrode force: 280 daN Arm spacing: 140 mm Kdodpfoxywt Esx Addog Arm reach: 500 mm with cardan suspension and suspension bracket 10 m connection cable and control line inclusive: auxiliary welding controller MPS 15036 with main switch according to VDE 0/100

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kdjdpexrg Ebefx Addjg Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Dalex Works Pms 10-2 380V Ksdpfog Rcpxox Addjdg 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: good (used), Rarely available. Idaho Little Gem 40" former for the production of potato croquettes etc. These are the industry standard machines used to produce for the World's leading fast food chains etc. Kedoigrvpepfx Addsdg

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm Kdodpfxjxtqv To Addjg contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm Kodpox Dmu Tjfx Addjdg --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: like new (used), water-cooled, pneumatically actuated spot welding gun with 5/2 solenoid valve Make: DALEX Type: 3228-4 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 350 mm With double stroke cylinder Long stroke: 75 mm Pre-stroke: 50 mm Working stroke with adjustable height: 0-25 mm Cardan suspension and suspension bracket 10 m connection cable and control cable Includes: External welding controller MPS 15033 The spot welding gun shows hardly any signs of use and is in like-new condition. Kdjdpsxwlzlofx Addeg

Condition: used, Ambition 1430 Glue Pot: UK Stock - £500 Collect or Delivered at cost Kdjdowyxq Ijpfx Addog Spare Glue pot for Brandt Ambition 1400 series / KDF 430 machine. Glue pot is compatible with machines that have a pre-melting unit fitted. Good condition pot, ready to use.

Condition: good (used), Good working condition. Please check out our other listings as well. Ksdpfx Aen Uv Uloddsdg

Condition: new, functionality: fully functional, Electric Potters Disc Machine New. 230 V With chair and shapers. Good working condition. Please check out our other listings as well. Kdedjv U Emgepfx Addog

Condition: excellent (used), Hand-operated, water-cooled spot welding gun DALEX Type A 3119 with double-stroke mechanism and short-stroke latch Short stroke 25 mm – long stroke 57 mm with electrode force switch and secondary transformer for current monitoring Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm gap: 120 mm Kdodpfeg Ew H Njx Addeg Arm reach: 250 mm with synchronous welding control RS 11-2 Main switch, connection cable, and 16 A CEE plug Extensive range of water-cooled electrode arms in stock

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm With attached control cabinet according to VDE 0100 With main switch Synchronous welding control MPS 15036 Kjdexvh Hbspfx Addedg

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring Ksdpfx Ajxrb Tgeddsdg - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: good (used), Features: • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Ksdpsupafvofx Addedg Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: SC7.3 - 321ESE00112, cooling capacity: 7.32 kW (9.95 HP), type of input current: AC, type of cooling: air, overall weight: 90 kg, ambient temperature (max.): 31 °C, ambient temperature (min.): 1 °C, input voltage: 230 V, total width: 600 mm, total length: 490 mm, total height: 1,303 mm, warranty duration: 3 months, Equipment: type plate available, MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Model: Coolmobile 25 (Industrial version) Mobile spot cooler Coolmobile 25 for targeted cooling of, for example, materials, cooling tunnels, specific room areas, and heat sources. The spot cooler is mobile on wheels and can be easily moved to the desired cooling location. The control panel has a temperature range from +1°C to +31°C and can be switched on and off automatically via a timer. The unit can be used anywhere with a standard Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged using a flange and warm air hose (both not included in the scope of supply). Ksdpfx Adjw Drtqjdodg Technical data: Cooling capacity / Kw: 7.32 (25,000 Btu) Airflow rate m³/h: 10.5 - 8.5 Power supply / V / Hz: 230 / 50 Starting current / A: 57 Operating current / A: 13 Power consumption / Kw: 2.6 Air filter: Aluminum and carbon Max. static pressure / mm: 30 WG ΔT °C: 10 - 15 Max. room size / m²: 58 Dimensions (W x H x D) / mm: 490 x 1303 x 600 Weight / kg: 90 Outlet: 3 x 125 mm Max. hose length / m: 12 Power cable length / m: 3 Refrigerant: R407C (1.2 kg) Dimensions (mm) L x W x H: 490 x 600 x 1303 Weight (kg): 90 Serial No.: 321ESE00112 Year of manufacture: 2019 Condition: Visual: 2, Technically OK Used Used machines may have visual imperfections due to their previous use. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Make: DALEX Model: 3328-6 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.5 kA Secondary open-circuit voltage: 4.75 V Electrode force: 600 daN Special version with arm spacing: 248 mm Ksdpovurw Eofx Addjdg With double-stroke cylinder – long stroke 51 mm – pre-stroke 33 mm – working stroke 0–18 mm with stroke adjustment With cardan suspension and suspension bracket Connection cable: 10 m Throat depth: 350 mm Synchronous welding controller MPS 1536

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Kdsdpjvyk Sfefx Addjg Weight: 550 kg

Condition: good (used), overall weight: 560 kg, Marking plate / marking table / surface plate / 1195x1000x160(35) mm Kjdpfexrb N Ujx Addodg -KOM 493- Offered here is a very heavy-duty marking plate or surface plate with the corresponding legs. Dimensions: 1195 x 1000 x 160 (35) mm Total weight: approx. 580 kg (incl. pallet) Weight per machine leg: approx. 42 kg Surface plate weight: approx. 392 kg The marking plate has a working height of 791 mm. The height of the legs is variable.

Condition: good (used), - Capacity 100 kVA Kedpoxk Tavjfx Addsdg - Pneumatic - Throat depth 570 mm - 380 V

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Kdjdpfxjwpkv Ie Addjg Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Kdjdorr Ui Repfx Addog Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Year of construction: 1990, condition: ready for operation (used), A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible. Kdjdpfext Rl Isx Addsg

Condition: good (used), – Capacity 15 kVA Kjdpfxoxgb Ado Addedg – Pneumatic – Throat depth 350 mm – Control TE 90 Mark II – Cooling unit – Documentation – 400V