Used Promote Band Agriculture for sale (6,124)

Condition: excellent (used), functionality: fully functional, Outreach 630 mm --- Cutting speed from 15 - 120 m/min --- Hydraulic table feed --- Table load approx. 450 kg --- Hydraulic lifting rollers in the table --- Table feed travel 400 mm . Table to the right of the saw blade, W x D 500 x 975 mm Table to the left of the saw blade, W x D 500 x 975 mm . Fpjdpfx Ajyr Hgajfled Designed for cutting high-quality material or for setting up clamping fixtures .

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1100295, functionality: fully functional, Manufacturer: BEHRINGER Model: HBP 530-1104GA Year of manufacture: 2000 Machine number: 1100295 Technical Data Fsdpfx Aoylbf Rsflspd Working range round material: ø 530 mm Working range square at 90°: 700 x 500 mm Working range round material at 75° mitre: ø 510 mm Working range square at 75° mitre: 700 x 500 mm Working range round material at 60° mitre: ø 465 mm Working range square at 60° mitre: 465 x 500 mm Working range round material at 45° mitre: ø 300 mm Working range square at 45° mitre: 300 x 500 mm Minimum cut-off length: 35 mm Minimum material dimension: ø 30 mm / □ 20 x 20 mm Remnant piece length, automatic manual: approx. 35 mm Remnant piece length, automatic: approx. 280 mm System / band tension pressure: 95 bar Coolant volume: 200 litres Cutting speed: 17 to 110 m/min Motor output – saw drive: 7.5 kW Motor output – hydraulic pump: 5.5 kW Motor output – coolant pump: 0.12 kW Connected load: approx. 14 kW Current consumption: 28 A Voltage: 400 V / 50 Hz Fuse protection: 35A Valve / control voltage: 24V DC Cable cross-section: 4 x 6 mm² Saw blade dimensions: 8800 x 54 x 1.6 mm Dimensions Length x width x height: Weight: 8,800 kg

Condition: new, *IMMEDIATELY AVAILABLE* Including pop-up banner roof / fold-out steps / LED interior lighting / 230V power distribution Technical Data: • Brand: Vezeko • Model: VE 27.46 SP • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Unregistered • TÜV (roadworthiness)/inspection: 2 years from first registration • Internal dimensions (LxWxH): 460 x 216 x 235 cm • External dimensions (LxWxH): 623 x 220 x 307 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,310 kg • Payload: 1,390 kg • Chassis: High-loader (wheels under body) • Tyres: 195/55R10C • Suspension: AL-KO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust V-drawbar, hot-dip galvanized • Overrun brake system from AL-KO • Very sturdy welded frame, fully hot-dip galvanized • Fold-out steps on the right (direction of travel) including canopy • Easy deployment of steps with assisted lift (gas struts) • Rotating bar lock mounted externally on side flap (contrary to illustration) • Side flap dimensions: approx. 3420 mm x 2200 mm • Handrails on both sides of the steps • 4x heavy-duty support legs with crank • 230 V CEE power inlet • Multiple free power sockets • 2 LED light strips interior with switch • Walk-on roof • Fold-out advertising panel with gas struts on the roof • Drawbar step in front of entry door • Manoeuvring handles • Automatic jockey wheel • Extension rod for easy closing of flaps • Sturdy sandwich construction, 50 mm insulated • Exterior panels of hot-dip galvanized and additionally powder-coated steel sheet • AL-KO hitch with collision protector • Steel mudguards • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Integrated rear fog light Optional accessories – Please inquire: • Anti-theft device • 100 km/h approval with shock absorbers • And more New trailer with warranty and TÜV (inspection). - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided - Export plates including customs clearance available Fsdpfx Aex Tcd Sjflepd Descriptions and pictures are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialized dealer & workshop for over 30 years for brands Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, changes, and prior sale excepted -

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Fpodsw Nadgspfx Afled Incl. spraying unit Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Fpodsymcrbjpfx Afled Storage location: Nattheim

Condition: used, Year of construction: 1992, operating hours: 10,855 h, power: 92 kW (125.09 HP), Equipment: ABS, all wheel drive, cabin, Unimog 427/10 Winter Service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase: 2640 mm * Tires: 14.5R20 * Remaining tire tread: approx. 90/50% front, 80/50% rear * 1 diesel tank * Trailer coupling * Front and rear PTO * Front and rear hydraulic connections * Snowplow mounting kit * Raised exhaust Body * Küpper-Weisser HD, year of manufacture 1992, 1.7 m³ grit spreader body * Spreader can be parked on supports * Three-way tipper Cab / Driver's cabin * 2-seater * Roof hatch * Beacon lights Engine / Transmission * 5,958 cm³ * Manual transmission * 312,656 km Weights * Gross weight: 7,500 kg * Payload: 3,000 kg * Curb weight: 4,500 kg Miscellaneous * German vehicle Fodswyy N Espfx Afljpd * 1 previous owner New general inspections / safety inspections or load reductions/increases are available on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for misprints, typographical errors, prior sale, or changes!—Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², a large selection of vehicles can be found. Our company philosophy is characterized by fairness and credibility. Because customer satisfaction is particularly important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, Storage location: Sonnefeld Fpjdpoway Dcsfx Afled

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Fpsdpfx Aevvkd Tsfled

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fodovvkfdjpfx Aflspd

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Fpodevvkfqepfx Aflod

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Fedpfxsvvkfws Afljpd

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Fpsdpoxyiiljfx Afled

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Fodpfx Afswayzbslepd

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Fsdpjvvkg Isfx Aflepd Storage location: Nattheim

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Fpjdjwl D S Uspfx Aflsd

Condition: new, – Semi-automatic Fodpfsh Razfex Afljpd – Hydraulic – 2 speeds – Double mitre – Saw pressure hydraulically adjustable – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot control – Emergency stop – Documentation – 400V

Condition: good (used), Year of construction: 2010, cutting diameter 220 mm saw band length 2480 mm table height ca. 910 mm capacity 90 degrees: flat 245 x 115 mm capacity 90 degrees: square 195 x 195 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: round 85.0 mm capacity 60 degrees: square 85 x 85 mm turning speed range: 45 + 90 m/min dimensions of saw-band 2480 x 27 x 0.9 mm clamping width max. 270 mm total power requirement 0.75 + 1.1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430 x 720 x 1700 mm New price in 2010 .. 2.400 Euro Special price on request Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - The saw arm can be tilted up to 60° for mitre cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, heavily dimensioned cast iron saw arm - 2 saw blade speeds for optimum cutting results (400 V) Fjdpfoyf N D Uox Aflopd - Automatic limit stop after material average - Robust cast iron vice with quick lock - Ball-bearing saw blade guide with quick adjustment for adapting to the workpiece width - workpiece width guarantees optimum work results

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 Fpjdpfoun N Dljx Afled B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: new, – Semi-automatic – Hydraulic – Infinitely variable speed 20/80 m/min – Double mitre – Cutting pressure hydraulically adjustable – Cooling – Saw blade 4290 x 34 x 1.1 mm Fpjdpfx Aoykl Nqeflod – Emergency stop – Documentation – 400V

Condition: excellent (used), Stainless steel version, Length: 1400mm Fsdpfx Ashvyzwjflspd Width: 1200mm Height: 1900mm Weight: about 250kg

Condition: used, Year of construction: 1990, functionality: fully functional, Technical Data: Description: Fully automatic band saw with dual-column guide for serial cutting Model: KAMU HB 270 A Year of Manufacture: 1990 Operating Modes: Manual, semi-automatic, fully automatic Working Range 90° round: ø250 mm Working Range 90° square: 250x250 mm Saw Blade Dimensions: 4,100 x 32 x 1.1 mm Voltage: 400/230 V 50 Hz Control Voltage: 230 V/24 V Dual-column: Yes Equipment: Chip conveyor, right side / chip brush motor with chip brush / operating manual Drive Motor: Infinitely variable control via helical-worm gearbox, blade speed from 11–55 or 22–110 m/min Motor Power: 2.4/3 kW Saw Blade Tension: Hydraulic blade tension Roller Conveyor (optional): Approx. 3.8m roller conveyor, included free of charge (weight approx. 300kg) Machine Dimensions (L/W/H): Approx. 2,800 x 2,200 x 1,900 mm (without roller conveyor) Fodpfx Afsyrrctjljpd Material Support Height: Approx. 750 mm Weight: Approx. 1,700 kg Overall Condition: Used, good, fully functional. Private sale, not a dealer. Machine can be demonstrated under power. All technical data subject to change without notice.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 230 V, cutting width (max.): 407 mm, total height: 2,000 mm, total length: 1,400 mm, total width: 2,500 mm, empty load weight: 3,500 kg, cutting range round steel at 90°: 407 mm, cutting speed: 300 mm/min, saw band length: 5,120 mm, saw blade length: 5,120 mm, MEBA 407A-OV CNC Horisontal saw Feeder lanes 2005 Year of make Siemens Controller Chip convoyer 5,5 kW 3,5 t L 1,4 x B 2,5 x H 2 m saw band length: 5120 mm Fsdpfjxz Dkyox Afljpd cutting speed: 15 - 150 m/min clamping height: 10 - 407 mm clamping width: 10 - 407 mm cutting range: 407 x 407 mm cutting range round: 407 mm down speed stepless: 0 - 300 mm/min.

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Fsdpfx Ajul Svloflepd Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, Year of construction: 2025, cutting diameter max. 225 mm saw band length 2.480 mm width of saw-band 27 mm dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° band speed 20 - 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm Fodpfeykb Ensx Aflspd total power requirement 1,5 kW weight of the machine ca. 185 kg dimensions of the machine ca. 1,5 x 1,2 x 1,6 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" Fjdpfslikvhex Afljpd X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor