Used Resistance Soldering for sale (1,823)

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Ljdpfjg Sfdlsx Afpshg Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle Lhjdpfexzrfljx Afpog 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Lhsdpfsw U Sw Aex Afpsg Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Year of construction: 2020, condition: ready for operation (used), A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example. Lhjdpfx Afex Hz R Djpeg

Year of construction: 2002, condition: ready for operation (used), A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026. Lsdpexn Aatefx Afpshg

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Lhodpfxjx Ecuxe Afpsg

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Lhjdpfx Afeud Svzepeg

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Lhedpfx Aou Rwausfpsg Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw Lhjdpju Rnd Dofx Afpog weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: like new (used), Year of construction: 2023, This is a 2 pot system. Machines where bought new in 2023 and project soon after ended. Lodpoyizzaefx Afpehg Additional specifications and pricing based on request!

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Lodpfxen Htkto Afpjhg

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Lhedpfen R Nhqjx Afpjg

Year of construction: 2007, condition: good (used), For sale is our Parmi SPI HS 70 L solder paste inspection system in good condition. Serial no.: H7L15212F. The unit is currently located at our Hungarian facility in Vac, but can be transported to Germany at any time. We are happy to answer any questions you may have regarding the system. Lodjyx Smaopfx Afpehg

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators - Pyrometer control for quartz preheating Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 Lhedpfxewzu Ure Afpjg - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Condition: used, very good condition Lhjdpehc T Irefx Afpog

Year of construction: 2017, condition: excellent (used), Stock number: 2727 Manufacturer: ESTA Lhjdpfxslt Uino Afpeg Year of manufacture: 2017 Type: KAF 100 Number: 16002366 Volume flow: 700 m³/h Max. Negative pressure: 1.100 Pa Connection diameter: 50 mm Equipment: mobile Accessories: see picture, among others laboratory suction arm connection: 0,55 kW 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm without hose

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Ljdpex Au Tnsfx Afpohg Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Insulation Tester Fluke 1555, 10KV Digital insulation measurement up to 10 kV, ideal for testing a wide range of high-voltage installations. Lsdpfx Afexr A Rtjpehg

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Ljdpfxjxdanto Afpehg

Condition: used, Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55 2Mdolue S021B-23A0548D, used, 2023, price: €190,000 (conveyor not included) Specifications available on request. Lhjdpfjx Tgvlox Afpog

Condition: excellent (used), Length 600 cm Width 300 cm Height 110 cm Loading free of charge Lhsdpfx Afoyc Evhopeg

Condition: excellent (used), Discharge height 380 cm The machine is ready for operation Ledpfeycx Evox Afpohg

Year of construction: 2024, condition: new, Stainless Steel Mixing Machine: Intended for sauerkraut mixing with carrots, beets, salt, spices, also for salad, kimchi, powders, noodles, rice Drum is rotated by inverter motor 2.2 kW, with adjustable speed. The machine is solidly constructed and has a massive structure, made entirely of stainless steel. Mixing blades are screwed, and it is possible to replace them with a different shape of mixing blades. General Features: • Machine made entirely from high-quality stainless steel. Can mix high acidity products as fermented foods; • Volume 600 liters, in one load, can mix up to 300 kg of products; • Gentle mixing, minimal product damage. Very good for Sauerkraut,powder mixing; • Can be used for Musli mixing. For other product, please, contact us; • Can be equipped with wheels with a fixation for easy transportation; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; Lhjdpfxodv Ecwo Afpjg • Inverter motor can be rotated from 0-60 turns per minute; • Automatic product discharge; • Separate control panel from the machine; • Various electrical connections and standards available on request;

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Lodpfx Asw Dtgrjfpohg Ask for additional details!

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Ask for additional details! Lhedpfx Aewnfbvofpjg