Used Scm T130 for sale (657)

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Redpfx Absz Aquhjusch Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Rcodpfx Aboz Ebzhjush Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm Rcedpfe Aayg Eox Abujh INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. Redpfx Ajzgf Idsbusch - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AE00005394, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 60 mm, cutting width (max.): 3,200 mm, saw blade diameter: 370 mm, rotational speed (max.): 4,650 rpm, Equipment: CE marking, documentation/manual, saw blade guard, Automatic single-blade panel saw Gabbiani P60 for cutting sheet materials (chipboard, MDF, plywood, fiberboard) and solid wood. Technical specifications: - Cutting length 4300 mm, cutting width 3200 mm - Saw blade overhang 60 mm - Main saw blade Ø 370 mm, scoring saw blade Ø 200 mm Rcjdpfxjz Rmwgo Abuoh - Scoring saw motor 1.5 kW New machine, year of manufacture 2026, available for immediate delivery from stock in Waregem. Request a non-binding quote.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. Reds Aa Rh Tjpfx Abusch 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table Redpoz Rmxdefx Abusch - Automatic centering and tensioning of the conveyor belt.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00041292, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 950 kg, Equipment: CE marking, documentation/manual, saw blade guard, Circular saw with a tilting saw blade, compliant with European safety standards and equipped with a motor braking system. Features: Independently driven scoring unit Ready 3 UP Plus version (3 axes), suitable for CE and USA/Canada Sliding carriage of 3200 mm Miter gauge with digital display of the position of the 2 stops Rcedpfx Abez Rmu Ejueh

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: Rodpfe Aazbwox Abuech • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Rodpfx Aeyvpp Hjbuoch Type designation: FORA-FRESATRICE CN Manufacturer: SCM Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Rated current: 31 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00040876, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Automatic edge banding machine SCM ME 40TR in CE version, manufactured in 2026. Equipped with a glue pot and features compliant with European directives, including a rectifying unit and a special rounding saw unit. Features include: a saw unit with an automatic on/off system, a scraper with an automatic on/off system, a brushing unit, a glue scraping unit with an automatic on/off system, an automatic strip feed system with a magazine, a glue pot for polyurethane adhesive with rapid discharge, an infrared lamp, an anti-stick unit, a spraying system for finishing the edge band, a “Nesting” copy unit for the routing unit and for the edge band scraper, and internal lighting. The optional edge band scraping unit is designed for processing edge bands thicker than 1 mm. Rcedpfx Aboz Nlmqeush

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness Rcsdpfx Abj Af Uuboush belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, total width: 1,650 mm, total height: 1,750 mm, Year of manufacture: 2013 Colour: White Empty weight: 2.600 kg Dimensions (LxBxH): 415 x 165 x 175 cm - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 Rcjdpfx Abozwuh Ieueh - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM K360 Edge Banding Machine Liquids Pre-milling cutters, Edge banding with roller, Replaceable adhesive tank Features adhesive discharge valve Pneumatic pre-cutting guillotine, Trimming saws R1-R2 top and bottom milling unit, pneumatically adjustable Rodpfx Abez Sl R Noujch Corner rounding unit, pneumatically adjustable Profile trimming unit, pneumatically engaged Cleaning fluids Straight trimming unit, Max. element height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Total run distance approximately 33,000m Very good condition Inspection and testing possible on-site

Condition: used, SCM SANDYA 15S sanding machine – used machine, arriving at our warehouse soon. - Working width: 1100 mm - 3 rollers - V380/50 - CE Rcjdpfxo Agu Efe Abueh Tecnomac code: CAL-058

Condition: new, Year of construction: 2026, Holzkraft SCM Format Panel Saw minimax si 4 - 315 / 32 with Scoring Unit Exhibition machine sold at a special price With pivoting saw blade and format sliding table made of anodized aluminum Article number: 5504832VR Solid work table made of heavy-duty, ribbed gray cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable with high-quality ball bearing system Hard metal guide rails – for long-lasting precision and minimal maintenance Pivoting gray cast iron saw unit with double segment guide – exact zero-point pivoting for maximum cutting accuracy Solid parallel fence with round bar guide Equipped with adjustable eccentric clamping device Integrated miter fence on the sliding table – for quick and precise miter cuts Scoring unit with belt drive TECHNICAL DATA Dimensions and weights Weight (net) approx. 640 kg Connection for dust extraction Dust extraction port diameter 120 mm Dust extraction port diameter saw blade guard 60 mm Installation information Transport width 980 mm Machine body length 1900 mm Machine body width/depth 840 mm Space requirement length 7235 mm Space requirement width/depth 4410 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Output power (motor power) 5.0 kW Rated duty cycle drive motor S6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 3200 mm Format sliding table width 360 mm Format sliding table height 175 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3200 mm Rip fence length 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° 100 mm Max. cutting height 45° 71 mm Explanation of max. cutting height: Independent of the scoring unit Diameter of saw blade 315 mm Explanation of diameter of saw blade: Independent of the scoring unit Saw blade speed 4000 min⁻¹ Scoring unit Diameter of scoring saw blade 120 mm Scoring saw blade speed 9000 min⁻¹ EQUIPMENT Equipment Scoring unit: Driven by the main saw blade motor via flat belt, with saw blade Ø 120 mm Anodized aluminum format sliding table ✔ Handle for sliding table ✔ Rcsdpfx Ae Afat Ajbuoh Material roller on the rip fence frame ✔ Saw parallel fence with round bar guide Fences: Two professional folding fences Rip fence shoe ✔ Eccentric clamp ✔ Table extension ✔ Table lengthening ✔ Saw blade guard ✔ Location: in stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Redpfx Aboz Ehvxousch

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Rcsdpfx Absz Nggloujh

Condition: ready for operation (used), Year of construction: 2023, overall weight: 623 kg, Panel saw manufactured in 2023. This SCM NOVA SI 30 features a maximum main blade diameter of 315 mm and a cutting height of 100 mm at 90°. It offers a rip capacity of 1000 mm to 1270 mm, depending on configuration. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA SI 30 machine we have for sale. Contact us for further details. • Max. main blade diameter: 315 mm • Max. cutting height at 90°: 100 mm • Max. cutting height at 45°: 70 mm • Blade tilting: 90°–45° • Rip capacity (parallel fence): 1000–1270 mm (depending on configuration) • Voltage: 400 V (three-phase) Rsdpfxoz Sqpvj Abujch • Frequency: 50 Hz • Nominal current: 12 A

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Rsdpfj Ad Igzsx Abuoch Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Rcodpfx Abjzwd Ikjuoh Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.

Condition: used, Year of construction: 2019, CNC machining center Manufacturer: SCM Type: Morbidelli M220 Year of manufacture: 2019 Technical data: Rcsdjz Hwkzspfx Abueh Working area: 5,510 x 1,620 x 180 mm 15 kW liquid-cooled HSK-63F electric spindle Speed up to 24,000 rpm Drilling head F29LTC: 17 vertical drilling spindles + 6 horizontal drilling units with dual output (3 in the X-direction, 2 in the Y-direction) Integrated saw blade in the X-direction TRB14 tool magazine with 11 positions FAST14 tool magazine with 14 positions Powerful vacuum clamping system TV FLEX work table Xilog Maestro CAD/CAM software Positioning accuracy up to 0.03 mm Travel speed up to 78 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), SCM K360 HP Edging Machine Liquids Pre-milling cutters, Plate heating Edge banding with roller, Replaceable tank Pneumatic pre-cutter, Trimming saws Up-and-down milling unit (multi milling cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine has NC control. Max. element height: 60 mm Max. edge banding thickness (in roll): 3 mm Feed speed: 11 m/min Rcsdpfsz Hl E Tox Abujh Original mileage: just under 19,000 meters. In my opinion, the technical condition is very good. The machine can be inspected and tested on site.

Condition: excellent (used), functionality: fully functional, working width 520mm 4-knives shaft delta/star start mechanical table regulation Redpfj Aazndjx Abujch variable regulated feeder shaft speed 4500 RPM roll in the table

Condition: used, SCM COMPACT XL edge trimming machine – used machine, arriving at our warehouse. Rcodpfx Ae Aguyhobush - Working width: 230 mm - 2 controlled axes (height and width) - Complete with tools - V380/50 - CE Tecnomac code: SCO-016