Used Screw In Temperature Sensor for sale (27,519)

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder Hnedpfx Asyfm Epeadoh As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm Hnedpfx Aasuzn Nnsdeh - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Year of construction: 2015, Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation Hnedpfxel Hxzks Aadeh

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Hsdpfx Aaewhkrasdjnh

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Hodowhkq Njpfx Aadsnh

Condition: used, Year of construction: 2023, Overview This rotary vacuum capping machine was manufactured in 2023 by Alwid (Germany). The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off closures on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately. Technical data Capacity: approx. 1,000–1,400 jars/h Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off closures Working direction: Right to left Working height: Adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control: Siemens S7 HMI (German) Construction: V2A stainless steel base, drip tray, capping head unit, CE-compliant safety guarding with Makrolon panels and safety doors Scope of Delivery Alwid Favorit-3SK rotary vacuum capping machine (2023) Integrated conveyors (1.5 m infeed + 1.5 m outfeed) Note: Sorting unit and additional format parts can be offered optionally. Hedpfx Aaexbrzaodonh

Condition: used, Year of construction: 2019, Overview  This semi-automatic bag filler was manufactured in 2019 by Spain-based Cartobol. The machine is available for sale because the owner purchased a more advanced model to improve production. It is available promptly. Technical data  Capacity: Up to 600 bags/h (3L) 510 bags/h (5L) 390 bags/h (10L) 360 bags/h (15L) 300 bags/h (20L) Formats: 3L – 20L Bag-in-Box (individual and web bags) Dimensions: 0.73m x 0.93m x 1.85m Weight: 156 kg Pressure: Min. 6 Bars Voltage: 220V Intensity: 6 A Construction: Stainless steel frame and rollers, mobile on wheels Filling system: High-precision electromagnetic flowmeter Pump: Stainless steel centrifugal pump (8,000 L/h) Control: PLC with 7" touch screen Features: Automatic CIP cleaning system Optimized filling with load cells Fast format change Low air content inside bags Hnsdpfowi Txlex Aadsh

Condition: used, Year of construction: 2023, Overview  This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data  Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines   Hedsxlqugspfx Aadjnh

Condition: used, Year of construction: 2007, Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps   Hnsdjl Hx Awjpfx Aadsh

Condition: used, Year of construction: 2004, Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle Hjdpfx Aoxrfzhoadenh

Condition: used, This Kaeser screw compressor CSD102 is being auctioned in our RESTLOS online industrial auction 'Closure of Flat Glass Facility – Glass Processing Machines, Warehouse Equipment, Compressors and Much More' in 01471 Radeburg. Hsdpfx Aeykra Aeadjnh

Condition: good (used), Year of construction: 2006, Screw compressor MARK Hnjdpfxjtx Akno Aadjh Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: good (used), Year of construction: 2002, Screw Compressor Water Cooled Fabr.BOGE Type:SO150 Bj.2002 Compression final pressure 10 bar Motorl.110KW with refrigerant dryer . Hnjdpfx Aajh Hi Injdsh Mass: L3,5m B1,5m H1,7m Weight each approx. 3200 Kg. Documentation available. 4. piece Available . Price for 1.piece .

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Hsdpfx Ash I T Nrjadsnh Diameter 50 mm Diameter 40 mm In good condition.

Condition: good (used), Year of construction: 2020, operating hours: 18,526 h, functionality: fully functional, machine/vehicle number: API842024, overall weight: 500 kg, total length: 1,280 mm, total width: 900 mm, total height: 1,600 mm, power: 26 kW (35.35 HP), rotational speed (max.): 6,500 rpm, ATLAS COPCO GA 26 VSD+FF compressor - max. pressure: 8 bar Hjdexw Ugqjpfx Aadjnh - volumetric flow: 5.1 m³/min - voltage: 400 V - frequency: 50 Hz Note: The item must be collected between 19 and 23 January 2026 on a binding, pre-arranged date. FCA D-73235 Weilheim Teck – loaded onto truck.

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Hnjdsygh Emepfx Aadsh Equipped with quick cleaning system on dosing screw Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom

Condition: new, Year of construction: 2025, Equipment: CE marking, Welding, cutting and cleaning fiber laser machine Hnsdpfjw Srtfex Aadsh

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. Hnjdoycvd Nopfx Aadsh The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) Hjdpfeycvdisx Aadonh We are happy to answer further questions by phone.

Condition: excellent (used), mileage: 390,170 km, power: 152 kW (206.66 HP), first registration: 11/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,250 mm, total width: 2,550 mm, loading space length: 7,400 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, Year of construction: 2020, Equipment: AdBlue, tail-lift, = Further Information = Technical Specifications Number of cylinders: 4 Engine displacement: 4,485 cc Maximum front axle load: 4,480 kg Hnodpfx Aaeyf U T Isdoh Maximum rear axle load: 8,480 kg Weights Unladen weight: 7,356 kg Payload: 4,634 kg Gross vehicle weight (GVW): 11,990 kg Functional Tail lift: Dhollandia, 2,000 kg Condition Technical condition: very good Visual condition: very good Identification Registration number: 74-BPX-9 Further Information Please contact our Sales department for more information. = Company Information = If you have any questions or suggestions, do not hesitate to contact us. We guarantee a reply within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (available on WhatsApp and Viber). MOB: Dutch (available on WhatsApp and Viber). When paying by bank transfer, please transfer the funds to the bank account listed below. Always verify the payment details on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: excellent (used), mileage: 406,912 km, power: 152 kW (206.66 HP), first registration: 12/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,250 mm, total width: 2,550 mm, loading space length: 7,400 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional Options and Equipment = - Adaptive cruise control - Alarm system - Remote central locking - Air-suspended seats - Sun visor flap - Immobilizer = Notes = ZCFAH1EF202708361 = Further Information = Technical Details Number of cylinders: 4 Engine displacement: 4,485 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 7,356 kg Payload: 4,634 kg Gross Vehicle Weight (GVW): 11,990 kg Functional Tail lift: Dhollandia, 2,000 kg Condition Technical condition: Very good Visual condition: Very good Identification Registration number: 89-BPZ-6 Additional Information Please contact Sales for further details. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). If paying by bank transfer, funds must be transferred to our bank account listed below. Always verify payment details as stated on our website. If you have received different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank Details: Hnodsyf Uwyjpfx Aadjh Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Hedpfxeyhcghe Aadonh Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Hsdoyhcc Aepfx Aadjnh Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-921-0027 Kallfass Super Wrap 650 De Luxe In-line, year 2012 format: 650 x 400 mm equipped: - transport speed 10 - 30 m/min. - tunnel clearance width, height 100 - 400 mm Hnsdpfjyingkox Aadoh - film shortage control - temperature conrtol - foild thickness up to 120 ym - foil roll diameter max. 400 mm - foil width max. max. 650 mm - in line band length 600 mm - Conveyor belt delivery 600 mm - user guidance Touchpanel, Siemens - tunnel sealing height adjustable 100-400 mm - product length 120 mm max. - Film tear and separation control - compressed air connection 6 bar / 20L Takt - shrink wrapping machine --> available: 02/2026

Condition: excellent (used), Year of construction: 2009, operating hours: 35,712 h, functionality: fully functional, Screw compressor Atlas Copco GA45VSDFF. Integrated dryer and frequency converter. 45 kW, 13 bar, 8.60 m3/min. Hjdpfjyknlnjx Aadsnh