Used Screw In Temperature Sensor for sale (27,574)

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square staggered perforation (QV) 10mm Sheet thickness = 6mm Over 500 screening drums manufactured per year speak for themselves!!! - Premium quality! - Always tested! Smooth running in operation! - Excellent value for money - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation patterns (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Different sheet thicknesses available! - Various materials possible (at least S355)! Hnedpfx Aoxnylaeadjh - Special customer requirements are not a problem, but our specialty! - All drums are painted! - Wide range kept in stock! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square, straight perforation (QG) 20mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speaks for itself !!! - Premium quality! Hodoxnyhhspfx Aadsnh - Always inspected! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Small bridges for optimal screening area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requirements are not a problem for us – they are our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Hodpjyi R U Nsfx Aadjnh • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour • Dimension: 1750 x 8650x1900 mm • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. Hnodsyi R U Aspfx Aadeh FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Screw Conveyor Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Screw dimensions: diam. 150 x 2700 mm Hedpfx Aohfdvioadonh

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. Hnsdpfx Aasnlag Iedjh 5. Unique design of the upper and lower glue tank and coordinate with the need of products. 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. New condition Taiwanese machine. The machine run a few hours, just it was tested. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Hjdpfx Aaom Tv U Todonh Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Hodpfx Astgpdzjadsnh Anvil weight: 24 ton

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Hedpfxolnk Tyj Aadonh Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Year of construction: 2001, operating hours: 100,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Nominal current: 26 A Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Hnedpfjyfud Tjx Aadsh Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER

Condition: used, Atlas Copco GA132 for sale, Oil injected rotary screw compressor designed for heavy duty industrial applications. Delivers high capacity and continuous compressed air, suitable for manufacturing, automotive and packaging applications. 132Kw 25.79 cubic meter per min Hsdpfx Aaeyh I Rpedonh 1547 cubic meter per hour 911 CFM 7.5 bar Fully serviced and ready to go Very good condition both inside and out

Condition: ready for operation (used), Year of construction: 2001, operating hours: 48,000 h, functionality: fully functional, pressure (max.): 12.5 bar, type of cooling: water, Equipment: type plate available, well-functioning variable speed screw compressor, water-cooled Hnjdpjykuqwofx Aadsh

Year of construction: 2012, condition: good (used), Temperature control unit GWK integat it40E-3 Stock no.: 503198 Machine type/ Device type: Temperature control unit Manufacturer: GWK Type: integat it40B-2 Year of manufacture: 2012 The gwk integrat 40 is a modular multi-circuit temperature control system that can be integrated into the overall process for segmented mold temperature control. - The component consists of: - Central module integrat 40 B2-WZ2 (year 2012) - Electrical mold module W1 (year 2012) - Hydraulic mold module W1 (year 2012) - Temperature control module it40 T1 (FY 2012) - Electric mold module W2 (FY 2012) - Hydraulic mold module W2 (FY 2012) - Temperature control module it40 T2 (FY 2012) Connected load: 63 A Max. operating temperature: 95° C Heating capacity: 3 kW / segment Cooling capacity: 27 kW Hnodpsyknrhofx Aadjh Pump output: 0.5 kW Interface: VARAN Voltage: 400-415V 50Hz Circulation medium: Water/water

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Hnodpfxsykab Ie Aadeh Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2005, operating hours: 52,029 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 375 m³/h, pressure (min.): 6 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, USED KAESER SCREW COMPRESSOR BSD72SFC + REFRIGERATION AIR DRYER TD61 Installation consists of: - 1 x Kaeser frequency-controlled screw compressor BSD72SFC Capacity: 6.25 m³/min Pressure: max. 8.5 bar Hnedpoykriqsfx Aadeh Motor power: 37 kW Total hours: 52,029 / load hours: 38,411 - 1 x Kaeser refrigeration air dryer TD61 Capacity: 7.0 m³/min Motor power: 1.1 kW - 1 x cyclone separator ZK04 with automatic condensate drain Capacity: 7.0 m³/min - 1 x fine filter FF-71 Capacity: 7.1 m³/min

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Hnsdpoyi Am Rjfx Aadjh Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: new, functionality: fully functional, With this offer, you are purchasing a new Kyocera TaskAlfa 8353ci colour multifunctional system. Item for sale: 1 x Kyocera TaskAlfa 8353ci with the following features: Includes original packaging. Condition: This offer is for a new device that has not yet been used. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Hnodpfx Aasxrbrcedjh

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Hnsdpfjyc Tvijx Aadoh Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Drive: Self driven by motor and belt with reducer Outlet: Double jacket outlet for temperature Control Location: In stock

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 32912, power: 22 kW (29.91 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Boge S29 compressor is an industrial equipment designed to deliver reliable performance in demanding environments. This used, lubricated model delivers a maximum pressure of 10 bar, ensuring sufficient power for numerous industrial applications. With an output of 22 kW, the Boge S29 guarantees notable energy efficiency, making it ideal for installations that require a constant and stable compressed air supply. Renowned for its robustness, this compressor is built for long service life and easy maintenance. Hnjdjyg Izbopfx Aadsh This Boge S29 compressor represents a smart choice for companies seeking an economical solution without compromising on quality and performance.

Condition: used, Plant from spiral freezer. Hnedpovvm Afsfx Aadsh

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net Hnsdpfeyk Eycox Aadsh €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2015, Worthington Creyssensac RLR208B500G10 Air compressor Hjdpfswtqufsx Aadsnh 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Hodpewbr N Hefx Aadjnh Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below Hedpfxeibichj Aadonh - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1996, Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Item no.: 60885637 Temperature chamber Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of manufacture: 1996 TK 07 Financing through our bank is also possible. komplett-konzept.leasingo.de Hnjdpfx Ajwbpzmjadeh You will find further articles - new and used - in our store! International shipping costs on request!