Used Separation for sale (6,738)

Condition: new, STRUERS Metallographic Cutting Machine Struers Labotom-5 NEW / unused – Year of manufacture 2025 Complete system with base cabinet, recirculating cooling unit and accessories For sale is a new, unused metallographic cutting machine from the manufacturer Struers including base cabinet, recirculating cooling unit and accessories. The Struers Labotom-5 is suitable for manual sectioning of material samples for metallographic sample preparation in laboratories, industry and quality assurance. The system has not yet been assembled or put into operation and is in its stored, shipping condition. Technical data: Manufacturer: Struers Type: Labotom-5 Article number: Year of manufacture: 2025 Type of equipment: Metallographic cutting machine Operation / Feed: Manual Electrical data: Mains connection: 3 × 380–415 V / 50 Hz Motor power S3 60 %: 2.2 kW Motor power S3 15 %: 3.2 kW Rated current: 5.3 A Maximum current draw: 10.6 A Kdedsz Szddopfx Acpsu Cutting wheel: Diameter: 250 mm Inner hole diameter: 32 mm Speed: 2,910 rpm at 50 Hz Cutting capacity according to manufacturer: Maximum diameter: 90 mm Height × Length: 42 × 120 mm Cutting length: 135 mm Cutting table: Width: 316 mm Depth: 225 mm T-slots: 10 mm Manual feed Dimensions and weight of the Labotom-5: Width main unit: 700 mm Width including handle and rinsing gun: 960 mm Depth: 760 mm Height with closed cover: 530 mm Height with open cover: 900 mm Equipment weight: 75 kg Recirculating cooling unit: Struers recirculating cooling unit System 3 Article number: Coolant tank: 50 liters Including related cooling components according to parts list and images Equipment: Closed cutting chamber with safety cover Manual cutting feed Cutting table with T-slots Rinsing gun Coolant supply Base cabinet / table Separate recirculating cooling unit with 50-liter tank Clamping tools and service kit according to scope of delivery Application areas: Metallography Material testing Sample preparation Quality assurance Research and development Industrial laboratory applications Scope of delivery: 1 × Struers Labotom-5 cutting machine – Art.-No. × Recirculating cooling unit System 3, 50-liter tank – Art.-No. × Base Plate 10 mm Left – Art.-No. × Base Plate 12 Left – Art.-No. × Table unit / Base cabinet – Art.-No. × Service kit Labotom-5 – Art.-No. 16042999 Further accessories, packaging and documents documented in the original photos, according to the illustrated delivery condition. Condition: NEW / unused Year of manufacture 2025 Not yet assembled or put into operation Main unit packed securely in a wooden crate for transport Base cabinet packed on a pallet and protected Further accessories packed separately No documented functional test The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The illustration of the fully assembled machine is an EXAMPLE. The original photos show the actual delivery condition. Scope of delivery according to description and original photos. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Construction fence with Douglas fir wood panel – durable, robust, and easy to maintain. Robust construction fence with a hot-dip galvanized and hand-welded steel frame, combined with a Douglas fir wood panel. Thanks to the galvanized finish, the frame is highly resistant to rust and weather conditions, making it suitable for long-term outdoor use. The wood panel can be replaced separately, so if it is damaged, the entire fence does not need to be replaced. 🔧 Specifications Welding: Hand-welded Panel dimensions: 2160 x 2000 mm Weight: approx. 37 kg Frame material: Hot-dip galvanized steel Vertical tube: Ø 40 mm Horizontal tube: Ø 28 mm Wall thickness: 1.5 mm Mesh size: 35 x 150 mm Horizontal wire thickness: 4.0 mm Vertical wire thickness: 3.0 mm U-profile: 40 x 42 x 40 mm Panel material: Douglas fir wood Douglas fir plank: 145 x 17 x 1090 mm ✅ Advantages Robust, hand-welded frame Hot-dip galvanized for rust and weather resistance Strong and high-quality construction Replaceable Douglas fir wood panels Suitable for long-term outdoor use Durable solution in case of damage Kjdpfxo Aaxc Sj Acpsdu Application Suitable for securely and attractively fencing off construction sites, areas, and other locations where both screening and durability are important.

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Model: RSDD-04 Type: Separator Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Material: Acid-resistant stainless steel Machine renovated and ready to work. Kdjdpfx Aoy Akhdecpju

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, rotational speed (max.): 3,520 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Used, very good condition Westfalia SA7-01-576 Separator, year of construction 1977. Packed in wooden crate to IPPC standard, ready to be shipped. - Brand new Time control box with Burkert valves and automatic controls - Performance 500 - 3.000 Ltr - self-cleaning - Motor 4 kw, 380V / 50 Hz Kdjdpfx Aozryq Rocpsu - Start-switch including phase changer and emergency stop function - with Tools, Instruction Manual and Spare part list - Made in Germany If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Kdodpfx Acjw Icgbopju

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing Kjdpfx Acexvrfnepodu The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents. Kodpfx Acju Dg Uhjpedu

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Ksdpfx Ajwi T Tvscpjdu Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: used, functionality: fully functional, Waters Alliance HT 2795/2790 Separations Modules. This Waters 2795 HPLC integrates a solvent management system and a sample management system to provide accurate analysis for HPLC, LC/MS or flow injection mass spectrometry applications. It is built for a variety of applications and are routinely used in analytical environments such as food safety, forensics, research and development, quality control, and chemical and pharmaceutical laboratories. Number of solvents: one to four Gradient profiles: 11 gradient curves Solvent conditioning: vacuum degas Maximum operating pressure: 5000 psi Compressibility compensation: automatic and continuous Sample plates: total of four plates Power requirements: 950 VA (Maximum) Kdjdpfjt Uwc Ajx Acpeu 2 for sale. 1 piece/2000 EUR. Good working condition. Please check out our other listings as well.

Condition: refurbished (used), Year of construction: 1995, Dust separator, dry sand screening unit. Throughput capacity: 160 tons/hour. Motor: 50 kW to 150 kW, depending on requirements. Current motor: 75 kW. New bearings. Interior lining with wear-resistant sheet metal. Disassembled and ready for transport. Equipped with a suction system and a hot air drying system. Kjdpfxeim D S Ss Acpedu

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process Kdedpfxoz D H Nhe Acpou ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Simple Automatic Setup The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the Kdjdez Ht Icopfx Acpsu bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Condition: good (used), 1 used, well-maintained, water-cooled MIG-MAG welding machine Manufacturer: RÖWAG Model: KGL 450-2 Technical data: Welding current range up to 450 A Kdedpfohy Tmzsx Acpou Weight approx. 200 kg Accessories / Special features: - Water cooling - Separate wire feeder with 4-roller wire feed - Incl. hose set, pressure regulator and ground cable without the welding wire spool shown in the picture! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Ksdpfxo Aaxiro Acpedu

Condition: good (used), Technical specifications for the pallet racking upright: Racking system: Stow Type: Pal Rack NS Included in delivery: 1x Pallet racking upright, used Material color: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame) Height: 2,000 mm Kedpfx Acoz R Sr Depsdu Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: Kdjdpfx Aezqmx Eecpju For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Here, we offer a Pfeiffer DUO 65, two-stage, high-performance rotary vane pump. Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Two-stage, high-performance rotary vane pump with a pumping speed of up to 70 m3/h. With 3-phase motor. With temperature sensor (3TF) for optimal motor protection. Integrated gas ballast and HV safety valve. For all applications in the rough and fine vacuum range. Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A Kdjdpfx Aozianqocpju Includes: ONF 35/65 oil mist separator, corrosion-resistant version. Mounts on the pump's exhaust port and prevents air pollution from oil mist. Type: PK Z40 150 Scope of delivery: (See picture) The unit comes from a warehouse clearance. We also offer express shipping (DHL, UPS, TNT). We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, ZEISS Type: DSM 962 The DSM 962 is a digitized scanning electron microscope equipped with an integrated 4 MB image memory, a 40 MB internal hard drive for image storage, and drives for external data and image storage. This enables quick and easy acquisition of information about the composition and morphology of sample surfaces, even down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both the examination of macrostructures and microstructures is possible. Through special add-ons, the range of applications can be significantly expanded, allowing for analytical investigations in micro-areas of the surface, for example. The device can be operated using conventional switches as well as via the keyboard or mouse (optional). The electron optics and vacuum control are conventional. Image memory functions are controlled via the keyboard or mouse (optional). Centrally located on the control panel is a separate information screen for displaying the menus. This user manual is intended to serve as a guide for the user to achieve the best possible results with the device. The explanations have been kept as simple as possible in order to provide even less experienced users with the necessary knowledge. Magnification range: 20x to 300,000x at a 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at a 50 mm working distance Resolution: 4 nm - guaranteed with a tungsten cathode at 30 kV, 6 mm working distance, untilted sample 25 nm - guaranteed with a tungsten cathode at 1 kV, 6 mm working distance, untilted sample 3.5 nm - guaranteed with an optimized LaB6 cathode at 30 kV, 6 mm working distance, untilted sample Scope of delivery: (DSM 962 with accessories as shown) Kedpfozdthysx Acpodu Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchasing. We would be happy to answer any further questions you may have by telephone.

Condition: used, RS Simulators RS Simulators ST2K 1000 / 55 Temperature Shock Chamber Water-cooled The unit was regularly serviced and maintained by the manufacturer until it was decommissioned. For sale is a high-performance temperature shock test chamber, type ST2K 1000 / 55. The unit is ideal for standard-compliant thermal shock tests in accordance with DIN EN 60068-3-5, as well as for demanding material and component tests. With its two separate temperature chambers and automatic horizontal test basket transfer, this unit offers the perfect solution for reliability tests in industry, automotive, research and quality assurance. Key technical data: Temperature ranges Upper test chamber (hot chamber): +40 °C to +180 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Lower test chamber (cold chamber): –70 °C to +100 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Test basket transfer: Horizontal movement (automated) Fast changeover for temperature shock tests Test chamber / usable volume (Type ST2K 1000) Volume: approx. 580 liters Internal dimensions: Width approx. 1070 mm, Height approx. 680 mm, Depth approx. 800 mm Max. load: approx. 150 kg Power supply: Total power: max. 33 kVA Current consumption: max. 65 A Mains connection: 3 × 400 V / N / PE / 50 Hz Main power cable: 5 × 25 mm² Water & compressed air connections Cooling water inlet: G 1", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized, max. 22 °C Condensate drains: multiple (non-pressurized) Kdedsy H Igfepfx Acpsu Compressed air connection: quick-release coupling NW 7.2 (G 1/4"), min. 4 bar, max. 10.5 bar Dimensions & Weight: External dimensions: Width: approx. 2800 mm Height: approx. 2400 mm Depth: approx. 2200 mm Weight: approx. 2800 kg Equipment Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm width) Full-fledged changeover cabinet Observation window Internal lighting SE-604 control unit Program operation and data recording possible RS232 interface Other technical data Sound level: approx. 67 dB(A) at 1 m distance (free field) Refrigerant: R449A: approx. 8.0 kg (GWP 1397) R23: approx. 2.5 kg (GWP 14800) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25 %–75 % RH Operating hours approx. 4,500 hours For your security as a buyer, please note the following information! The following points will be carried out on our offered units in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (see pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: used, Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in easy-to-use laboratory weathering equipment. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000's humidification system uses a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron solid particle filter. Ensure that a separate oil-water separator is installed and do not rely on the air regulator filter, as it is designed only as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5" Width x 29" Depth x 72" Height (95 cm Width x 73 cm Depth x 183 cm Height) Kdjdpezg Tmhefx Acpou Required footprint: 41.5" Width x 80" Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature Kdsdpfx Acezizmbopju and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Year of construction: 2026, condition: new, Number of drawer 13 Stk. weight ca. 150 kg range L-W-H ca. 1100 x 620 x 1120 mm Manufacturer's Suggested Retail Price: approx. 6.575 euros Tool set: 448 pieces Special price available upon request!! Features: - Mobile tool cart including a 15 cm wooden worktop * Sturdy and durable work surface for heavy-duty tasks - 13 high-quality drawers - 11 drawers with organized contents * Includes a 448-piece tool set (!!) * Drawers with locks * The left and right drawers can be locked separately - Color = Green - 2 fixed casters / 2 swivel casters - * Includes parking brakes - Corner guards: Corner protection edges mounted all around * To protect the cart and the surrounding area from damage Kdjdpfx Acez S N Dljpou

Condition: used, operating hours: 219 h, Year of manufacture: 2010 Field of application: Internal logistics Dimensions of cargo space: 170 x 100 x 140 cm General condition: average Technical condition: average Visual appearance: average Production country: US Please contact Vink Machinery for more information Kdodpovc Ehgsfx Acpeu Minuteman Powerboss SC2832E * 219 hours of operation * 80 cm scrubbing width * Separate charger * New scrub brushes * No batteries included

Condition: new, AL-KO POWER UNIT 250 P - Exhibition machine - Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 250 mm, Nominal volumetric flow: 3,534 m³/h, Maximum volumetric flow: 4,900 m³/h, Maximum negative pressure: 3,184 Pa, Filter area: 22.4 m², Chip collection volume: 2 x 250 liters, Number of bags: 2, Kdsds Aaz S Nepfx Acpou Motor 400 V: 7.5 kW, Dimensions (L x W x H): 2,351 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 758 kg, According to: GS - HO - new exhibition machine -

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted -Total volume: 600 liters -Outer diameter: 1360 mm -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding Kdsdpfx Aezhxdujcpou -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg