Used Shoe Sorter for sale (460)

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit Ledpfx Ajxac E Hjhzohb With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Lhedpfxsff Hdfe Ahzeb Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power Lhjdpelht H Njfx Ahzsb oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Lhsdpfx Ahsff Hdbezeb Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Lhodpsgf Sw Nefx Ahzob Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking Lsdpfxjbxz S Hs Ahzehb The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg Ledpfjf N Nflsx Ahzehb

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Four sided planer - working width 15 - 300 mm - working thickness 10 - 150 mm - min. piece length 800 mm Lhodpfx Ahsx Rcxwszjb - min. piece length 300 mm - feed table 2500 mm - pneumatic left side pressure roller - two-piece pressure shoe - additional table for multi saw - Anti kickback device for multi saw - Schneider 5.7" touch screen EASYSET control * nc control axis-3 (left radial) * nc control as-4 (top radial) * nc control height control pressure bar - Feed motor 7.5 HP, 6-24 m/min. - 1st axis, 15 HP, diam. 50 mm, 6000 rpm - 2nd axis, 10 HP, diam. 50 mm, 6000 rpm - 3rd axis, 10 HP, diam. 50 mm, 6000 rpm - 4th axis, 20 HP, diam. 50 mm, 6000 rpm - 5th axis, 20 HP, diam. 50 mm, 6000 rpm

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm Lhjdpfx Aex U Urqshzsb - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece Lhedpowvficofx Ahzob

Condition: used, Year of construction: 2002, Max. working width: 400 mm; max. working height: 120 mm; sanding shoe 1st unit: fixed; sanding belt length 1st unit: 1800 mm; sanding belt width 1st unit: 400 mm; sanding belt speed 1st unit: 22 m/sec; drive motor 1st unit: 7.5 kW; cleaning brushes: yes; fixed feed speed: 8 m/min; control: manual control panel; belt oscillation: yes; table lift: manual; table display: dial gauge; operating pressure: 6-8 bar; weight approx.: 550 kg; extraction diameter: 150 mm; Storage location: Customer. Lodsx Tu Ddjpfx Ahzohb

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Ljdexdqbkjpfx Ahzjhb Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg Ljdpfjh Dwl Djx Ahzshb

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering for sale an X-BELT SORTING SYSTEM (FLEXSORT SC3) from the manufacturer DEMATIC. GENERAL DESCRIPTION: - The system offered is a Dematic X-Belt FlexSort SC3 sorter, ideal for logistics centers, sorting hubs, e-commerce, retail, and high-throughput operations. - Pre-owned (2015) X-Belt sorter providing precise, fast, and silent sorting thanks to its motorized trays with electromagnetic drive. The equipment has been dismantled from an active site and is available immediately. MAIN FEATURES: Circular sorter: - Up to 12,000 items/hour - Positive sorting on both sides - Maximum sorter speed: 2 m/s Lhsdox Sw Rqjpfx Ahzsb - Sorter designed for rapid maintenance (removal in under 5 minutes) - Powered by linear motors - Total footprint: ~2,700 m² Cross-belt trays: - Cross-belt tray size: 800 mm x 450 mm - Minimum item size: 150 × 150 × 5 mm – 0.25 kg - Maximum item size: 600 × 400 × 400 mm – 35 kg - Item discharge left and right CHUTES: - 155 chutes + 1 reject lane - Chute equipment: (Saturation indicator light stacks [1/10 chutes], PTL displays, motorized chutes with automatic diverter + idle rollers, multiple fill level sensors, and a saturation sensor) INDUCTIONS: - 4 hybrid induction stations, total capacity 2,400 items/hour each - Automatic item feeding on belts - 36 PTL sort destinations per induction DWS: - Dimensioning - Automatic barcode reading - Dynamic weighing SUPPORTED ITEM TYPES: - Plastic trays - Cartons - Soft parcels (pouches, envelopes, polybags) KEY BENEFITS: - Low energy consumption - Simplified maintenance - WMS / WCS compatibility - Dual-sided sorting (left/right) - >99% sorting accuracy - Quiet operation (

Condition: new, functionality: fully functional, fuel type: gasoline, color: yellow, overall weight: 64 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Rammer BS 68-2, - NEW -! - The successor to the Wacker Neuson Rammer BS 60-2 - Weight: 64 kg, 2-stroke petrol engine WM 80c, impact force: 19 kN, Shoe width: 280 mm; other sizes available! Location: Warehouse D-46514 Schermbeck. _____ Buy Wacker Neuson Rammer BS 68-2 | 2-stroke vibratory rammer WM 80c | Rammer with 19 kN impact force | 280 mm foot width | New rammers from stock | Vibratory rammer with petrol engine | Rammer for pipeline construction | Professional Wacker Neuson rammer | Compact vibratory rammer | Rammer for construction sites Areas of application: - Compaction in pipeline and sewer construction - Civil engineering and landscaping - Small area compaction works on construction sites Lhedpex Rnw Eefx Ahzsb - Construction sites with confined spaces - Construction companies and rental fleets - Fiber optic expansion projects

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Lhodpfx Ahexx R Rhjzjb Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Lhodpsxx R Akefx Ahzeb Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement Ledpfx Ahsxx Sdpjzohb

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 800 - 320 mm grinding depth: 380 mm dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel Lhjdju Ngaujpfx Ahzjb *

Condition: used, Year of construction: 1998, Technical details: Lsdju Ngciepfx Ahzehb internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: new, Year of construction: 2025, Schmidt PV 29-4 Year of manufacture: 2025 Condition: new Clearing width: 2895 mm at 32° / 2760 mm at 36° Weight with steel cutting edge: 940 kg Equipment: - Combination wear edge 36 - Lifting device (lifting/lowering/swiveling) - For mounting plate size 5 - Hydraulic coupling ISO 16028 (S) (size 12 / BG3) – 2 cells - Steel skid shoes - Side deflectors - Snow dust cover with scraper cover - Red/white warning markings - Warning flags - Plough lighting 24V, 7-pin Lhodpex Rx S Hefx Ahzsb Sale in existing condition and only to other businesses! Our business hours: Mon–Thu: 07:00 – 15:30 Fri: 07:00 – 15:00 Offer is based on our general terms and conditions! Sale only to business customers! Used vehicles/equipment are sold without legal warranty as per our general terms and conditions! If you have any further questions, I will be happy to assist you. Please arrange an appointment in advance for inspections and/or test drives! Vehicles/equipment are not always available on-site.

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. Lhsdpsx N Havsfx Ahzsb 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Lhsdpfx Ahera Emtezjb Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt Ljdpfx Ahoxnynujzjhb - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations) Lsdpfx Aex Tgt Djhzohb