Used Small Brewery for sale (3,790)

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Rsdpfx Aaodnfdleasr Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Rjdpfetvgqnox Aaasr

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Rodpjwrihnjfx Aaajr Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant Redou Hlb Eepfx Aaajr 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 Rodpfx Ajx R Eh Ioaaer - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small parts conveyor, flat belt conveyor, belt conveyor GEPPERT type GAL 25 Serial No. 1009078 Year of manufacture: 2010 Usable length: 700 mm Belt width: 60 mm Belt length: 1520 mm Frame profile height: 50 mm Return roller diameter: 50 / 26 mm Belt speed: 26 m/min Motor power: 0.09 kW Power supply: 400 Volt, 50 Hz - Driven by geared motor with chain - Height-adjustable stand from 660 to 1000 mm belt height - Conveyor belt inclination adjustable Overall dimensions (L x W x H): 750 x 400 x 660 mm Weight: 21 kg Very good condition Rjdpfxox R Ehzj Aaajr

Condition: excellent (used), functionality: fully functional, mileage: 147 km, first registration: 12/2017, fuel type: diesel, maximum load weight: 519 kg, next inspection (TÜV): 03/2027, fuel: diesel, energy efficiency: B, color: white, number of gears: 5, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, USB port, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power mirror, sliding door, start-stop system, MERCEDES CITAN VAN YEAR 2017 ENGINE 1461 CC 110 HP ONE OWNER 147,000 KM EURO 6 B PAYLOAD 520 KG WITH AIR CONDITIONING ELECTRIC WINDOWS/CENTRAL LOCKING ELECTRIC MIRRORS SIDE SLIDING DOOR Rsdpfx Ajynr Uhsaajr

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Rsdpjxk Ty Nofx Aaaor

Condition: refurbished (used), 100% REVISED IN 2025 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Rjdpfx Aasymarfoasr Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Year of construction: 1995, condition: used, functionality: fully functional, Compact bridge saw, perfect for cutting stone, marble, and granite. The machine is fully functional. Features: Hydraulic table, very convenient to use Electric head movement Blade: Ø 600 mm Z-axis stroke: 500 mm Rjdpfex A Dc Sox Aaajr

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Rodpfx Aasm Albdsasr Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Arch press for small formats BAS 450-KF8 For pressing individual products (small folds) in single or multiple up applications Two pairs of press rollers, adjustable independently Redpfjxvfaxsx Aaaer - Pre-press roller with 40 mm diameter - Main press roller with 60 mm diameter Easy and quick adjustment of sheet thickness Effortless repositioning of infeed belts Format change without tools Integrated control unit (Start/Stop) Height adjustment via lifting table (infeed height min. 550 mm / max. 900 mm) Format min.: 30 mm x 50 mm / max.: 450 mm x 450 mm Maximum product thickness: 8 mm Pressing force: 8,000 N Speed: 30-160 m/min

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Rsdpfshfxkaox Aaajr Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: new, functionality: fully functional, Year of construction: 2025, product width (max.): 1,250 mm, working width: 1,250 mm, conveyor belt width: 1,250 mm, product height (max.): 1 mm, Machines for sheet metal winding from bigger to smaller coils of inner diameter of 300 mm and biggest mass of 300 kg 1250mm. The Rsdowqc I Sopfx Aaasr winder has an integrated manual counter, shears for transversal cutting and a probe for removing the winded sheet meta SAS small coil recoiler for coils up to 300kg, 1250 mm.

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel max. diameter 80 mm x 80 mm Rodpfx Ajgxuhmoaaor

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Rjdpfx Aaexf Uqlsaor Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner Redpfx Aaeiiciqsajr - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Rsdpfxjxwyzao Aaajr Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Condition: good (used), Conveyor technology (roller carpet) with numerous small rollers - used - : Prices net per piece at the site! Manufacturer: unknown Type: unknown Year of manufacture: unknown Type 1 = 6 pieces 100.-€ element length: ca. 1,22m element width: ca. 91cm Frame height: approx. 9cm Rjdpfekn D A Uex Aaajr single user = 5 pieces 100.-€ element width: ca. 91cm frame height: ca. 9cm Inner dimension: 1,92m curve = 1 piece 100.-€ element width: ca. 91cm frame height: ca. 9cm Inner dimension: 1,92m Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2017, condition: used, functionality: fully functional, A complete brewery setup is available for sale, including: brewing system, pressure/fermentation and storage tanks, cooling unit, bottling system, labeler, and optionally all trademark, image, and domain rights of the Hebenbräu brand. Brewing system components: Brewiks Microbrewery 500 liters - 1 x mash tun / wort tun (capacity 760 l, touchscreen control panel, electric heating, pump, insulation, mounted on casters); 1 x lauter tun / whirlpool (capacity 840 l, whirlpool function, sparge nozzle, wort cooler (tubular heat exchanger), heated via wall transfer, mounted on wheels); 5 x pressure tank / fermentation and storage tank ZKT10HL (gross volume 1350 l / tank, double jacket made of stainless steel, cooling in the cylinder and conical section, PT 100 temperature probe); 1 x Chilly MAX 90 LT cooling unit; 1 x bottling system; 1 x labeler. Further information available upon request and on our website. Redpswg Ea Aefx Aaasr

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Rsdoxu H I Uepfx Aaajr Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 309002, No minimum price – guaranteed sale to the highest bidder! Redpfx Aexygdmsaaer By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02/7467-70, total height: 6,000 mm, number of shelf rows: 8, shelf height: 300 mm, number of feeding trays: 18,500, Used High-Bay Storage System Type "Automated Small-Parts Warehouse" Rsdpfx Ajxqrbleaaer Frame height: 6 m, depth: 700 m, bay width: 1.5 m, 14 levels high, approx. 18,500 pallet spaces, bay load: ? kg, shelf load: 3x? kg, total length approx. 400 m. Scope of delivery: racking system, 4 pcs. Viaspeed S2-RZF DT, 1 storage and retrieval machine (SRM / stacker crane) 18,500 small load carriers (KLT containers) 600 mm x 400 mm x 270 mm The racking system is in operation until approx. 31.3.26. Required floor space in our facility: 51 m x 18 m x 6 m (height) There are 8 racking aisles serviced by 4 shuttle trolleys. Well preserved, little used, some components never used. Already dismantled. Preference is for sale of the entire racking system. For bids on partial quantities, racking aisles of approx. 51 m must be taken. The buyer must purchase and commission the main control unit (stacker crane / SRM) from the supplier at their own expense. Please state your offer price. Sale only within Europe (EU), Türkiye, Great Britain, and Switzerland. Only the German version of this text is binding. Technical data and item list: see handout. No packaging; any warranty is excluded. If you wish to dismantle the system yourself, please inform us accordingly in your offer. We assume no liability for the accuracy of the technical data, the completeness of accessories or tooling, or for compliance with any safety or environmental requirements specified in accident prevention regulations.

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. Rjdpfxexpg Abj Aaajr This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Brewhouse Stainless steel lauter tun with copper cladding, 1800 liters. Stainless steel mash tun with copper cladding, 1800 liters. Steam generator, stainless steel, 800 liters. Hot water tank, stainless steel, 3600 liters. Leach tank, stainless steel, 397 liters. Stainless steel tank, stainless steel, 1900 liters. Plate heat exchanger: M9 NBN Plate heat exchanger: SIGMA M13 NAL SIEMENS control system 5 centrifugal pumps Storage Total volume: approx. 48,000 liters. 3 x horizontal stainless steel tanks, identical, 1600 liters each, on a frame with casters. 3 x vertical stainless steel tanks, identical, 1600 liters each. 1 x vertical stainless steel tank, stainless steel, 2100 liters. 11 x stainless steel tanks V2A vertical, identical, 2000 lt each. Redpfx Aaowiu Tweaor 4 x V2A horizontal stainless steel tanks, on a frame, identical, 1000 lt each. 5 x V2A vertical stainless steel tanks, identical, 1690 lt each.